diff mbox series

[V2,6/6] tty: serial: meson: Change request_irq to devm_request_irq and move devm_request_irq to meson_uart_probe()

Message ID 20211229135350.9659-7-yu.tu@amlogic.com
State Superseded
Headers show
Series the UART driver compatible with the Amlogic Meson S4 | expand

Commit Message

Yu Tu Dec. 29, 2021, 1:53 p.m. UTC
Because an interrupt error occurs when the user opens /dev/ttyAML* but
don't close it, and then opens the same port again. This problem is
encountered in actual projects.

Signed-off-by: Yu Tu <yu.tu@amlogic.com>
---
 drivers/tty/serial/meson_uart.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index c17109d6d441..41c2c607e70e 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -135,8 +135,6 @@  static void meson_uart_shutdown(struct uart_port *port)
 	unsigned long flags;
 	u32 val;
 
-	free_irq(port->irq, port);
-
 	spin_lock_irqsave(&port->lock, flags);
 
 	val = readl(port->membase + AML_UART_CONTROL);
@@ -284,7 +282,6 @@  static void meson_uart_reset(struct uart_port *port)
 static int meson_uart_startup(struct uart_port *port)
 {
 	u32 val;
-	int ret;
 
 	meson_uart_reset(port);
 
@@ -298,10 +295,7 @@  static int meson_uart_startup(struct uart_port *port)
 	val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2));
 	writel(val, port->membase + AML_UART_MISC);
 
-	ret = request_irq(port->irq, meson_uart_interrupt, 0,
-			  port->name, port);
-
-	return ret;
+	return 0;
 }
 
 static void meson_uart_change_speed(struct uart_port *port, unsigned long baud)
@@ -908,6 +902,14 @@  static int meson_uart_probe(struct platform_device *pdev)
 	meson_ports[pdev->id] = port;
 	platform_set_drvdata(pdev, port);
 
+	ret = devm_request_irq(&pdev->dev, port->irq, meson_uart_interrupt,
+			       0, dev_name(&pdev->dev), port);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request uart irq: %d\n",
+			ret);
+		return ret;
+	}
+
 	/* reset port before registering (and possibly registering console) */
 	meson_uart_reset(port);