diff mbox series

[v2] dt-bindings: phy: convert Qualcomm USB HS phy to yaml

Message ID 20211230000740.103869-1-david@ixit.cz
State Accepted
Commit e7393b60a14f460fbc5705f81c3383809f07dac5
Headers show
Series [v2] dt-bindings: phy: convert Qualcomm USB HS phy to yaml | expand

Commit Message

David Heidelberg Dec. 30, 2021, 12:07 a.m. UTC
Conversion of Qualcomm USB HS phy documentation to yaml.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2:
 - changed uint8 array to matrix
 - improved clock-names check
 - move reset-names items, adjust DTS files later
 - added clocks and resets min and maxItems
 - if'ed resets, since apq8064 doesn't have phy reset
---
 .../bindings/phy/qcom,usb-hs-phy.txt          |  84 --------------
 .../bindings/phy/qcom,usb-hs-phy.yaml         | 108 ++++++++++++++++++
 2 files changed, 108 insertions(+), 84 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
deleted file mode 100644
index b3b75c1e6285..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
+++ /dev/null
@@ -1,84 +0,0 @@ 
-Qualcomm's USB HS PHY
-
-PROPERTIES
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
-                following:
-
-                        "qcom,usb-hs-phy-apq8064"
-                        "qcom,usb-hs-phy-msm8916"
-                        "qcom,usb-hs-phy-msm8974"
-
-- #phy-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Should contain 0
-
-- clocks:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain clock specifier for the reference and sleep
-                clocks
-
-- clock-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain "ref" and "sleep" for the reference and sleep
-                clocks respectively
-
-- resets:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain the phy and POR resets
-
-- reset-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain "phy" and "por" for the phy and POR resets
-                respectively
-
-- v3p3-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: Should contain a reference to the 3.3V supply
-
-- v1p8-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: Should contain a reference to the 1.8V supply
-
-- extcon:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: Should contain the vbus extcon
-
-- qcom,init-seq:
-    Usage: optional
-    Value type: <u8 array>
-    Definition: Should contain a sequence of ULPI address and value pairs to
-                program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related
-                to Device Mode Eye Diagram test. The addresses are offsets
-                from the ULPI_EXT_VENDOR_SPECIFIC address, for example,
-                <0x1 0x53> would mean "write the value 0x53 to address 0x81".
-
-EXAMPLE
-
-otg: usb-controller {
-	ulpi {
-		phy {
-			compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
-			#phy-cells = <0>;
-			clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-			clock-names = "ref", "sleep";
-			resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
-			reset-names = "phy", "por";
-			v3p3-supply = <&pm8941_l24>;
-			v1p8-supply = <&pm8941_l6>;
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x63>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
new file mode 100644
index 000000000000..a60386bd19b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -0,0 +1,108 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,usb-hs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's USB HS PHY binding description
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,usb-hs-phy-apq8064
+  then:
+    properties:
+      resets:
+        maxItems: 1
+
+      reset-names:
+        const: por
+
+  else:
+    properties:
+      resets:
+        minItems: 2
+        maxItems: 2
+
+      reset-names:
+        items:
+          - const: phy
+          - const: por
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8916
+          - qcom,usb-hs-phy-msm8974
+      - const: qcom,usb-hs-phy
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+    contains:
+      items:
+        - const: ref
+        - const: sleep
+
+  resets: true
+
+  reset-names: true
+
+  v1p8-supply: true
+
+  v3p3-supply: true
+
+  extcon: true
+
+  "#phy-cells":
+    const: 0
+
+  qcom,init-seq:
+    $ref: /schemas/types.yaml#/definitions/uint8-matrix
+    description: >
+      Sequence of ULPI address and value pairs to
+      program into the ULPI_EXT_VENDOR_SPECIFIC area.
+      This is related to Device Mode Eye Diagram test.
+    maxItems: 32 # no hard limit
+    items:
+      items:
+        - description: >
+            the address is offset from the ULPI_EXT_VENDOR_SPECIFIC address
+        - description: value
+
+required:
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    otg: usb-controller {
+      ulpi {
+        phy {
+          compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
+          #phy-cells = <0>;
+          clocks = <&clk 0>, <&clk 258>;
+          clock-names = "ref", "sleep";
+          resets = <&gcc 10>, <&otg 0>;
+          reset-names = "phy", "por";
+          v3p3-supply = <&pm8941_l24>;
+          v1p8-supply = <&pm8941_l6>;
+          extcon = <&smbb>;
+          qcom,init-seq = /bits/ 8 <0x1 0x63>;
+        };
+      };
+    };