diff mbox

[12/14] arm64: Check for selected granule support

Message ID CAKv+Gu-eWRcFQkn_99WF_3H=u8qAAVis60SuegdxyeYK3v5QdQ@mail.gmail.com
State New
Headers show

Commit Message

Ard Biesheuvel Sept. 2, 2015, 10:19 a.m. UTC 
On 2 September 2015 at 11:48, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> On 13 August 2015 at 19:29, Catalin Marinas <catalin.marinas@arm.com> wrote:
>> On Thu, Aug 13, 2015 at 03:45:07PM +0100, Suzuki K. Poulose wrote:
>>> On 13/08/15 13:28, Steve Capper wrote:
>>> >On 13 August 2015 at 12:34, Suzuki K. Poulose <suzuki.poulose@arm.com> wrote:
>>> >>  __enable_mmu:
>>> >>+       mrs     x1, ID_AA64MMFR0_EL1
>>> >>+       ubfx    x2, x1, #ID_AA64MMFR0_TGran_SHIFT, 4
>>> >>+       cmp     x2, #ID_AA64MMFR0_TGran_ENABLED
>>> >>+       b.ne    __no_granule_support
>>> >>         ldr     x5, =vectors
>>> >>         msr     vbar_el1, x5
>>> >>         msr     ttbr0_el1, x25                  // load TTBR0
>>> >>@@ -626,3 +643,8 @@ __enable_mmu:
>>> >>         isb
>>> >>         br      x27
>>> >>  ENDPROC(__enable_mmu)
>>> >>+
>>> >>+__no_granule_support:
>>> >>+       wfe
>>> >>+       b __no_granule_support
>>> >>+ENDPROC(__no_granule_support)
>>> >>--
>>> >>1.7.9.5
>>> >>
>>> >
>>> >Is is possible to tell the user that the kernel has failed to boot due
>>> >to the kernel granule being unsupported?
>>>
>>> We don't have anything up at this time. The "looping address" is actually a clue
>>> to the (expert) user. Not sure we can do something, until we get something like DEBUG_LL(?)
>>
>> No.
>>
>>> Or we should let it continue and end in a panic(?). The current situation can boot a
>>> multi-cluster system with boot cluster having the Tgran support(which doesn't make a
>>> strong use case though). I will try out some options and get back to you.
>>
>> If the boot CPU does not support 16KB pages, in general there isn't much
>> we can do since the console printing is done after we enabled the MMU.
>> Even mapping the UART address requires fixmap support and the PAGE_SIZE
>> is hard-coded in the kernel image. The DT is also mapped at run-time.
>>
>> While in theory it's possible to fall back to a 4KB page size just
>> enough to load the DT and figure out the early console, I suggest we
>> just live with the "looping address" clue.
>>
>
> Couldn't we allocate some flag bits in the Image header to communicate
> the page size to the bootloader?

Something like this perhaps?

------------8<---------------
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Comments

Catalin Marinas Sept. 4, 2015, 1:58 p.m. UTC | #1 
On Wed, Sep 02, 2015 at 12:19:07PM +0200, Ard Biesheuvel wrote:
> On 2 September 2015 at 11:48, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> > Couldn't we allocate some flag bits in the Image header to communicate
> > the page size to the bootloader?
> 
> Something like this perhaps?
> 
> ------------8<---------------
> diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt
> index 7d9d3c2286b2..13a8aaa9a6e9 100644
> --- a/Documentation/arm64/booting.txt
> +++ b/Documentation/arm64/booting.txt
> @@ -104,7 +104,8 @@ Header notes:
>  - The flags field (introduced in v3.17) is a little-endian 64-bit field
>    composed as follows:
>    Bit 0:       Kernel endianness.  1 if BE, 0 if LE.
> -  Bits 1-63:   Reserved.
> +  Bits 1-2:    Kernel page size.   0=unspecified, 1=4K, 2=16K, 3=64K
> +  Bits 3-63:   Reserved.
> 
>  - When image_size is zero, a bootloader should attempt to keep as much
>    memory as possible free for use by the kernel immediately after the
> diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h
> index 8fae0756e175..5def289bda84 100644
> --- a/arch/arm64/kernel/image.h
> +++ b/arch/arm64/kernel/image.h
> @@ -47,7 +47,9 @@
>  #define __HEAD_FLAG_BE 0
>  #endif
> 
> -#define __HEAD_FLAGS   (__HEAD_FLAG_BE << 0)
> +#define __HEAD_FLAG_PAGE_SIZE ((PAGE_SHIFT - 10) / 2)
> +
> +#define __HEAD_FLAGS   (__HEAD_FLAG_BE << 0) | (__HEAD_FLAG_PAGE_SIZE << 1)

I'm fine with this.
diff mbox

Patch

diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt
index 7d9d3c2286b2..13a8aaa9a6e9 100644
--- a/Documentation/arm64/booting.txt
+++ b/Documentation/arm64/booting.txt
@@ -104,7 +104,8 @@  Header notes:
 - The flags field (introduced in v3.17) is a little-endian 64-bit field
   composed as follows:
   Bit 0:       Kernel endianness.  1 if BE, 0 if LE.
-  Bits 1-63:   Reserved.
+  Bits 1-2:    Kernel page size.   0=unspecified, 1=4K, 2=16K, 3=64K
+  Bits 3-63:   Reserved.

 - When image_size is zero, a bootloader should attempt to keep as much
   memory as possible free for use by the kernel immediately after the
diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h
index 8fae0756e175..5def289bda84 100644
--- a/arch/arm64/kernel/image.h
+++ b/arch/arm64/kernel/image.h
@@ -47,7 +47,9 @@ 
 #define __HEAD_FLAG_BE 0
 #endif

-#define __HEAD_FLAGS   (__HEAD_FLAG_BE << 0)
+#define __HEAD_FLAG_PAGE_SIZE ((PAGE_SHIFT - 10) / 2)
+
+#define __HEAD_FLAGS   (__HEAD_FLAG_BE << 0) | (__HEAD_FLAG_PAGE_SIZE << 1)

 /*
  * These will output as part of the Image header, which should be little-endian