@@ -143,6 +143,44 @@ In robust cases the client unfortunately needs to call
acpi_dma_request_slave_chan_by_index() directly and therefore choose the
specific FixedDMA resource by its index.
+Named Interrupts
+================
+
+Drivers with ACPI node can have names to interrupts in ACPI table which
+can be used to get the irq number in the driver.
+
+The interrupt name can be listed in _DSD as 'interrupt-names'. The names
+should be listed as an array of strings which will map to the Interrupt
+property in ACPI table corresponding to its index.
+
+The table below shows an example of its usage::
+
+ Device (DEV0) {
+ ...
+ Name (_CRS, ResourceTemplate() {
+ ...
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) {
+ 0x20,
+ 0x24
+ }
+ })
+
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () {"interrupt-names",
+ Package (2) {"default", "alert"}},
+ }
+ ...
+ })
+ }
+
+The interrupt name 'default' will correspond to 0x20 in Interrupt property
+and 'alert' to 0x24.
+
+The driver can call the function - device_irq_get_byname with the device
+and interrupt name as arguments to get the corresponding irq number.
+
SPI serial bus support
======================
Added details and example for named interrupts in the ACPI Table Signed-off-by: Akhil R <akhilrajeev@nvidia.com> --- Documentation/firmware-guide/acpi/enumeration.rst | 38 +++++++++++++++++++++++ 1 file changed, 38 insertions(+)