diff mbox series

[4/4] clk: sifive: Move all stuff into SoCs header files from C files

Message ID 70c9317814b06c7ce37688b158178b188d3fd604.1642582832.git.zong.li@sifive.com
State Accepted
Commit 5e916932df639bc2eeecc96c3a1f2cce496f1a93
Headers show
Series [1/4] dt-bindings: change the macro name of prci in header files and example | expand

Commit Message

Zong Li Jan. 19, 2022, 9:28 a.m. UTC
Improve PRCI driver to reduce the complexity, we remove the SoCs C files
by putting all stuff in each SoCs header files, and include these
SoCs-specific header files in core of PRCI. It can also avoid the W=1
kernel build warnings about variable defined but not used
[-Wunused-const-variable=], like commit 487dc7bb6a0c ("clk: sifive:
fu540-prci: Declare static const variable 'prci_clk_fu540' where it's
used") does.

Signed-off-by: Zong Li <zong.li@sifive.com>
Suggested-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/clk/sifive/Makefile      |   2 +-
 drivers/clk/sifive/fu540-prci.c  |  89 --------------------
 drivers/clk/sifive/fu540-prci.h  |  91 ++++++++++++++++++++-
 drivers/clk/sifive/fu740-prci.c  | 134 -------------------------------
 drivers/clk/sifive/fu740-prci.h  | 130 +++++++++++++++++++++++++++++-
 drivers/clk/sifive/sifive-prci.c |   5 --
 6 files changed, 214 insertions(+), 237 deletions(-)
 delete mode 100644 drivers/clk/sifive/fu540-prci.c
 delete mode 100644 drivers/clk/sifive/fu740-prci.c
diff mbox series

Patch

diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
index 7b06fc04e6b3..efdf01f1c8d5 100644
--- a/drivers/clk/sifive/Makefile
+++ b/drivers/clk/sifive/Makefile
@@ -1,2 +1,2 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_CLK_SIFIVE_PRCI)	+= sifive-prci.o fu540-prci.o fu740-prci.o
+obj-$(CONFIG_CLK_SIFIVE_PRCI)	+= sifive-prci.o
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
deleted file mode 100644
index d686f5cf3f71..000000000000
--- a/drivers/clk/sifive/fu540-prci.c
+++ /dev/null
@@ -1,89 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2018-2021 SiFive, Inc.
- * Copyright (C) 2018-2019 Wesley Terpstra
- * Copyright (C) 2018-2019 Paul Walmsley
- * Copyright (C) 2020-2021 Zong Li
- *
- * The FU540 PRCI implements clock and reset control for the SiFive
- * FU540-C000 chip.  This driver assumes that it has sole control
- * over all PRCI resources.
- *
- * This driver is based on the PRCI driver written by Wesley Terpstra:
- * https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
- *
- * References:
- * - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
- */
-
-#include <linux/module.h>
-
-#include <dt-bindings/clock/sifive-fu540-prci.h>
-
-#include "fu540-prci.h"
-#include "sifive-prci.h"
-
-/* PRCI integration data for each WRPLL instance */
-
-static struct __prci_wrpll_data sifive_fu540_prci_corepll_data = {
-	.cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
-	.cfg1_offs = PRCI_COREPLLCFG1_OFFSET,
-	.enable_bypass = sifive_prci_coreclksel_use_hfclk,
-	.disable_bypass = sifive_prci_coreclksel_use_corepll,
-};
-
-static struct __prci_wrpll_data sifive_fu540_prci_ddrpll_data = {
-	.cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
-	.cfg1_offs = PRCI_DDRPLLCFG1_OFFSET,
-};
-
-static struct __prci_wrpll_data sifive_fu540_prci_gemgxlpll_data = {
-	.cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
-	.cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET,
-};
-
-/* Linux clock framework integration */
-
-static const struct clk_ops sifive_fu540_prci_wrpll_clk_ops = {
-	.set_rate = sifive_prci_wrpll_set_rate,
-	.round_rate = sifive_prci_wrpll_round_rate,
-	.recalc_rate = sifive_prci_wrpll_recalc_rate,
-	.enable = sifive_prci_clock_enable,
-	.disable = sifive_prci_clock_disable,
-	.is_enabled = sifive_clk_is_enabled,
-};
-
-static const struct clk_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
-	.recalc_rate = sifive_prci_wrpll_recalc_rate,
-};
-
-static const struct clk_ops sifive_fu540_prci_tlclksel_clk_ops = {
-	.recalc_rate = sifive_prci_tlclksel_recalc_rate,
-};
-
-/* List of clock controls provided by the PRCI */
-struct __prci_clock __prci_init_clocks_fu540[] = {
-	[FU540_PRCI_CLK_COREPLL] = {
-		.name = "corepll",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu540_prci_wrpll_clk_ops,
-		.pwd = &sifive_fu540_prci_corepll_data,
-	},
-	[FU540_PRCI_CLK_DDRPLL] = {
-		.name = "ddrpll",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu540_prci_wrpll_ro_clk_ops,
-		.pwd = &sifive_fu540_prci_ddrpll_data,
-	},
-	[FU540_PRCI_CLK_GEMGXLPLL] = {
-		.name = "gemgxlpll",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu540_prci_wrpll_clk_ops,
-		.pwd = &sifive_fu540_prci_gemgxlpll_data,
-	},
-	[FU540_PRCI_CLK_TLCLK] = {
-		.name = "tlclk",
-		.parent_name = "corepll",
-		.ops = &sifive_fu540_prci_tlclksel_clk_ops,
-	},
-};
diff --git a/drivers/clk/sifive/fu540-prci.h b/drivers/clk/sifive/fu540-prci.h
index c220677dc010..e0173324f3c5 100644
--- a/drivers/clk/sifive/fu540-prci.h
+++ b/drivers/clk/sifive/fu540-prci.h
@@ -1,16 +1,99 @@ 
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
- * Copyright (C) 2020 SiFive, Inc.
- * Zong Li
+ * Copyright (C) 2018-2021 SiFive, Inc.
+ * Copyright (C) 2018-2019 Wesley Terpstra
+ * Copyright (C) 2018-2019 Paul Walmsley
+ * Copyright (C) 2020-2021 Zong Li
+ *
+ * The FU540 PRCI implements clock and reset control for the SiFive
+ * FU540-C000 chip.  This driver assumes that it has sole control
+ * over all PRCI resources.
+ *
+ * This driver is based on the PRCI driver written by Wesley Terpstra:
+ * https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
+ *
+ * References:
+ * - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
  */
 
 #ifndef __SIFIVE_CLK_FU540_PRCI_H
 #define __SIFIVE_CLK_FU540_PRCI_H
 
+
+#include <linux/module.h>
+
+#include <dt-bindings/clock/sifive-fu540-prci.h>
+
 #include "sifive-prci.h"
 
-#define NUM_CLOCK_FU540	4
+/* PRCI integration data for each WRPLL instance */
+
+static struct __prci_wrpll_data sifive_fu540_prci_corepll_data = {
+	.cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+	.cfg1_offs = PRCI_COREPLLCFG1_OFFSET,
+	.enable_bypass = sifive_prci_coreclksel_use_hfclk,
+	.disable_bypass = sifive_prci_coreclksel_use_corepll,
+};
+
+static struct __prci_wrpll_data sifive_fu540_prci_ddrpll_data = {
+	.cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+	.cfg1_offs = PRCI_DDRPLLCFG1_OFFSET,
+};
+
+static struct __prci_wrpll_data sifive_fu540_prci_gemgxlpll_data = {
+	.cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
+	.cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET,
+};
+
+/* Linux clock framework integration */
+
+static const struct clk_ops sifive_fu540_prci_wrpll_clk_ops = {
+	.set_rate = sifive_prci_wrpll_set_rate,
+	.round_rate = sifive_prci_wrpll_round_rate,
+	.recalc_rate = sifive_prci_wrpll_recalc_rate,
+	.enable = sifive_prci_clock_enable,
+	.disable = sifive_prci_clock_disable,
+	.is_enabled = sifive_clk_is_enabled,
+};
+
+static const struct clk_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
+	.recalc_rate = sifive_prci_wrpll_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu540_prci_tlclksel_clk_ops = {
+	.recalc_rate = sifive_prci_tlclksel_recalc_rate,
+};
+
+/* List of clock controls provided by the PRCI */
+static struct __prci_clock __prci_init_clocks_fu540[] = {
+	[FU540_PRCI_CLK_COREPLL] = {
+		.name = "corepll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu540_prci_wrpll_clk_ops,
+		.pwd = &sifive_fu540_prci_corepll_data,
+	},
+	[FU540_PRCI_CLK_DDRPLL] = {
+		.name = "ddrpll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu540_prci_wrpll_ro_clk_ops,
+		.pwd = &sifive_fu540_prci_ddrpll_data,
+	},
+	[FU540_PRCI_CLK_GEMGXLPLL] = {
+		.name = "gemgxlpll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu540_prci_wrpll_clk_ops,
+		.pwd = &sifive_fu540_prci_gemgxlpll_data,
+	},
+	[FU540_PRCI_CLK_TLCLK] = {
+		.name = "tlclk",
+		.parent_name = "corepll",
+		.ops = &sifive_fu540_prci_tlclksel_clk_ops,
+	},
+};
 
-extern struct __prci_clock __prci_init_clocks_fu540[NUM_CLOCK_FU540];
+static const struct prci_clk_desc prci_clk_fu540 = {
+	.clks = __prci_init_clocks_fu540,
+	.num_clks = ARRAY_SIZE(__prci_init_clocks_fu540),
+};
 
 #endif /* __SIFIVE_CLK_FU540_PRCI_H */
diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c
deleted file mode 100644
index bd66559fe2f8..000000000000
--- a/drivers/clk/sifive/fu740-prci.c
+++ /dev/null
@@ -1,134 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2020-2021 SiFive, Inc.
- * Copyright (C) 2020-2021 Zong Li
- */
-
-#include <linux/module.h>
-
-#include <dt-bindings/clock/sifive-fu740-prci.h>
-
-#include "fu540-prci.h"
-#include "sifive-prci.h"
-
-/* PRCI integration data for each WRPLL instance */
-
-static struct __prci_wrpll_data sifive_fu740_prci_corepll_data = {
-	.cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
-	.cfg1_offs = PRCI_COREPLLCFG1_OFFSET,
-	.enable_bypass = sifive_prci_coreclksel_use_hfclk,
-	.disable_bypass = sifive_prci_coreclksel_use_final_corepll,
-};
-
-static struct __prci_wrpll_data sifive_fu740_prci_ddrpll_data = {
-	.cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
-	.cfg1_offs = PRCI_DDRPLLCFG1_OFFSET,
-};
-
-static struct __prci_wrpll_data sifive_fu740_prci_gemgxlpll_data = {
-	.cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
-	.cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET,
-};
-
-static struct __prci_wrpll_data sifive_fu740_prci_dvfscorepll_data = {
-	.cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET,
-	.cfg1_offs = PRCI_DVFSCOREPLLCFG1_OFFSET,
-	.enable_bypass = sifive_prci_corepllsel_use_corepll,
-	.disable_bypass = sifive_prci_corepllsel_use_dvfscorepll,
-};
-
-static struct __prci_wrpll_data sifive_fu740_prci_hfpclkpll_data = {
-	.cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET,
-	.cfg1_offs = PRCI_HFPCLKPLLCFG1_OFFSET,
-	.enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk,
-	.disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll,
-};
-
-static struct __prci_wrpll_data sifive_fu740_prci_cltxpll_data = {
-	.cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET,
-	.cfg1_offs = PRCI_CLTXPLLCFG1_OFFSET,
-};
-
-/* Linux clock framework integration */
-
-static const struct clk_ops sifive_fu740_prci_wrpll_clk_ops = {
-	.set_rate = sifive_prci_wrpll_set_rate,
-	.round_rate = sifive_prci_wrpll_round_rate,
-	.recalc_rate = sifive_prci_wrpll_recalc_rate,
-	.enable = sifive_prci_clock_enable,
-	.disable = sifive_prci_clock_disable,
-	.is_enabled = sifive_clk_is_enabled,
-};
-
-static const struct clk_ops sifive_fu740_prci_wrpll_ro_clk_ops = {
-	.recalc_rate = sifive_prci_wrpll_recalc_rate,
-};
-
-static const struct clk_ops sifive_fu740_prci_tlclksel_clk_ops = {
-	.recalc_rate = sifive_prci_tlclksel_recalc_rate,
-};
-
-static const struct clk_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = {
-	.recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate,
-};
-
-static const struct clk_ops sifive_fu740_prci_pcie_aux_clk_ops = {
-	.enable = sifive_prci_pcie_aux_clock_enable,
-	.disable = sifive_prci_pcie_aux_clock_disable,
-	.is_enabled = sifive_prci_pcie_aux_clock_is_enabled,
-};
-
-/* List of clock controls provided by the PRCI */
-struct __prci_clock __prci_init_clocks_fu740[] = {
-	[FU740_PRCI_CLK_COREPLL] = {
-		.name = "corepll",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu740_prci_wrpll_clk_ops,
-		.pwd = &sifive_fu740_prci_corepll_data,
-	},
-	[FU740_PRCI_CLK_DDRPLL] = {
-		.name = "ddrpll",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu740_prci_wrpll_ro_clk_ops,
-		.pwd = &sifive_fu740_prci_ddrpll_data,
-	},
-	[FU740_PRCI_CLK_GEMGXLPLL] = {
-		.name = "gemgxlpll",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu740_prci_wrpll_clk_ops,
-		.pwd = &sifive_fu740_prci_gemgxlpll_data,
-	},
-	[FU740_PRCI_CLK_DVFSCOREPLL] = {
-		.name = "dvfscorepll",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu740_prci_wrpll_clk_ops,
-		.pwd = &sifive_fu740_prci_dvfscorepll_data,
-	},
-	[FU740_PRCI_CLK_HFPCLKPLL] = {
-		.name = "hfpclkpll",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu740_prci_wrpll_clk_ops,
-		.pwd = &sifive_fu740_prci_hfpclkpll_data,
-	},
-	[FU740_PRCI_CLK_CLTXPLL] = {
-		.name = "cltxpll",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu740_prci_wrpll_clk_ops,
-		.pwd = &sifive_fu740_prci_cltxpll_data,
-	},
-	[FU740_PRCI_CLK_TLCLK] = {
-		.name = "tlclk",
-		.parent_name = "corepll",
-		.ops = &sifive_fu740_prci_tlclksel_clk_ops,
-	},
-	[FU740_PRCI_CLK_PCLK] = {
-		.name = "pclk",
-		.parent_name = "hfpclkpll",
-		.ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops,
-	},
-	[FU740_PRCI_CLK_PCIE_AUX] = {
-		.name = "pcie_aux",
-		.parent_name = "hfclk",
-		.ops = &sifive_fu740_prci_pcie_aux_clk_ops,
-	},
-};
diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h
index 511a0bf7ba2b..f31cd30fc395 100644
--- a/drivers/clk/sifive/fu740-prci.h
+++ b/drivers/clk/sifive/fu740-prci.h
@@ -1,17 +1,139 @@ 
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
- * Copyright (C) 2020 SiFive, Inc.
- * Zong Li
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Copyright (C) 2020-2021 Zong Li
  */
 
 #ifndef __SIFIVE_CLK_FU740_PRCI_H
 #define __SIFIVE_CLK_FU740_PRCI_H
 
+#include <linux/module.h>
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+
 #include "sifive-prci.h"
 
-#define NUM_CLOCK_FU740	9
+/* PRCI integration data for each WRPLL instance */
+
+static struct __prci_wrpll_data sifive_fu740_prci_corepll_data = {
+	.cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+	.cfg1_offs = PRCI_COREPLLCFG1_OFFSET,
+	.enable_bypass = sifive_prci_coreclksel_use_hfclk,
+	.disable_bypass = sifive_prci_coreclksel_use_final_corepll,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_ddrpll_data = {
+	.cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+	.cfg1_offs = PRCI_DDRPLLCFG1_OFFSET,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_gemgxlpll_data = {
+	.cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
+	.cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_dvfscorepll_data = {
+	.cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET,
+	.cfg1_offs = PRCI_DVFSCOREPLLCFG1_OFFSET,
+	.enable_bypass = sifive_prci_corepllsel_use_corepll,
+	.disable_bypass = sifive_prci_corepllsel_use_dvfscorepll,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_hfpclkpll_data = {
+	.cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET,
+	.cfg1_offs = PRCI_HFPCLKPLLCFG1_OFFSET,
+	.enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk,
+	.disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_cltxpll_data = {
+	.cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET,
+	.cfg1_offs = PRCI_CLTXPLLCFG1_OFFSET,
+};
+
+/* Linux clock framework integration */
+
+static const struct clk_ops sifive_fu740_prci_wrpll_clk_ops = {
+	.set_rate = sifive_prci_wrpll_set_rate,
+	.round_rate = sifive_prci_wrpll_round_rate,
+	.recalc_rate = sifive_prci_wrpll_recalc_rate,
+	.enable = sifive_prci_clock_enable,
+	.disable = sifive_prci_clock_disable,
+	.is_enabled = sifive_clk_is_enabled,
+};
 
-extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740];
+static const struct clk_ops sifive_fu740_prci_wrpll_ro_clk_ops = {
+	.recalc_rate = sifive_prci_wrpll_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu740_prci_tlclksel_clk_ops = {
+	.recalc_rate = sifive_prci_tlclksel_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = {
+	.recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu740_prci_pcie_aux_clk_ops = {
+	.enable = sifive_prci_pcie_aux_clock_enable,
+	.disable = sifive_prci_pcie_aux_clock_disable,
+	.is_enabled = sifive_prci_pcie_aux_clock_is_enabled,
+};
+
+/* List of clock controls provided by the PRCI */
+static struct __prci_clock __prci_init_clocks_fu740[] = {
+	[FU740_PRCI_CLK_COREPLL] = {
+		.name = "corepll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu740_prci_wrpll_clk_ops,
+		.pwd = &sifive_fu740_prci_corepll_data,
+	},
+	[FU740_PRCI_CLK_DDRPLL] = {
+		.name = "ddrpll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu740_prci_wrpll_ro_clk_ops,
+		.pwd = &sifive_fu740_prci_ddrpll_data,
+	},
+	[FU740_PRCI_CLK_GEMGXLPLL] = {
+		.name = "gemgxlpll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu740_prci_wrpll_clk_ops,
+		.pwd = &sifive_fu740_prci_gemgxlpll_data,
+	},
+	[FU740_PRCI_CLK_DVFSCOREPLL] = {
+		.name = "dvfscorepll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu740_prci_wrpll_clk_ops,
+		.pwd = &sifive_fu740_prci_dvfscorepll_data,
+	},
+	[FU740_PRCI_CLK_HFPCLKPLL] = {
+		.name = "hfpclkpll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu740_prci_wrpll_clk_ops,
+		.pwd = &sifive_fu740_prci_hfpclkpll_data,
+	},
+	[FU740_PRCI_CLK_CLTXPLL] = {
+		.name = "cltxpll",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu740_prci_wrpll_clk_ops,
+		.pwd = &sifive_fu740_prci_cltxpll_data,
+	},
+	[FU740_PRCI_CLK_TLCLK] = {
+		.name = "tlclk",
+		.parent_name = "corepll",
+		.ops = &sifive_fu740_prci_tlclksel_clk_ops,
+	},
+	[FU740_PRCI_CLK_PCLK] = {
+		.name = "pclk",
+		.parent_name = "hfpclkpll",
+		.ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops,
+	},
+	[FU740_PRCI_CLK_PCIE_AUX] = {
+		.name = "pcie_aux",
+		.parent_name = "hfclk",
+		.ops = &sifive_fu740_prci_pcie_aux_clk_ops,
+	},
+};
 
 static const struct prci_clk_desc prci_clk_fu740 = {
 	.clks = __prci_init_clocks_fu740,
diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
index 80a288c59e56..916d2fc28b9c 100644
--- a/drivers/clk/sifive/sifive-prci.c
+++ b/drivers/clk/sifive/sifive-prci.c
@@ -12,11 +12,6 @@ 
 #include "fu540-prci.h"
 #include "fu740-prci.h"
 
-static const struct prci_clk_desc prci_clk_fu540 = {
-	.clks = __prci_init_clocks_fu540,
-	.num_clks = ARRAY_SIZE(__prci_init_clocks_fu540),
-};
-
 /*
  * Private functions
  */