@@ -191,18 +191,6 @@ config S3C64XX_DEV_SPI0
Compile in platform device definitions for S3C64XX's type
SPI controller 0
-config S3C64XX_DEV_SPI1
- bool
- help
- Compile in platform device definitions for S3C64XX's type
- SPI controller 1
-
-config S3C64XX_DEV_SPI2
- bool
- help
- Compile in platform device definitions for S3C64XX's type
- SPI controller 2
-
config SAMSUNG_DEV_TS
bool
help
@@ -1125,75 +1125,3 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
}
#endif /* CONFIG_S3C64XX_DEV_SPI0 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-static struct resource s3c64xx_spi1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c64xx_device_spi1 = {
- .name = "s3c6410-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
- .resource = s3c64xx_spi1_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs)
-{
- struct s3c64xx_spi_info pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0) {
- pr_err("%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- pd.num_cs = num_cs;
- pd.src_clk_nr = src_clk_nr;
- pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-
- s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI1 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-static struct resource s3c64xx_spi2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_SPI2),
-};
-
-struct platform_device s3c64xx_device_spi2 = {
- .name = "s3c6410-spi",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
- .resource = s3c64xx_spi2_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs)
-{
- struct s3c64xx_spi_info pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0) {
- pr_err("%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- pd.num_cs = num_cs;
- pd.src_clk_nr = src_clk_nr;
- pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-
- s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI2 */
@@ -16,12 +16,3 @@ int s3c64xx_spi0_cfg_gpio(void)
return 0;
}
#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
@@ -16,12 +16,6 @@ static inline void s3c24xx_spi_setname(char *name)
#ifdef CONFIG_S3C64XX_DEV_SPI0
s3c64xx_device_spi0.name = name;
#endif
-#ifdef CONFIG_S3C64XX_DEV_SPI1
- s3c64xx_device_spi1.name = name;
-#endif
-#ifdef CONFIG_S3C64XX_DEV_SPI2
- s3c64xx_device_spi2.name = name;
-#endif
}
#endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
@@ -52,17 +52,9 @@ struct s3c64xx_spi_info {
*/
extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
int num_cs);
-extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
-extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
- int num_cs);
/* defined by architecture to configure gpio */
extern int s3c64xx_spi0_cfg_gpio(void);
-extern int s3c64xx_spi1_cfg_gpio(void);
-extern int s3c64xx_spi2_cfg_gpio(void);
extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
#endif /*__SPI_S3C64XX_H */
The helpers to use SPI host 1 and 2 are unused in the kernel and taking up space and maintenance hours. New systems should use device tree and not this, so delete the code. Cc: linux-samsung-soc@vger.kernel.org Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1-v2: - Split out to separate patch --- arch/arm/mach-s3c/Kconfig | 12 ---- arch/arm/mach-s3c/devs.c | 72 ----------------------- arch/arm/mach-s3c/setup-spi-s3c64xx.c | 9 --- arch/arm/mach-s3c/spi-core-s3c24xx.h | 6 -- include/linux/platform_data/spi-s3c64xx.h | 8 --- 5 files changed, 107 deletions(-)