diff mbox series

dt-bindings: Improve phandle-array schemas

Message ID 20220119015038.2433585-1-robh@kernel.org
State New
Headers show
Series dt-bindings: Improve phandle-array schemas | expand

Commit Message

Rob Herring Jan. 19, 2022, 1:50 a.m. UTC
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. Many schemas for
phandle-array properties aren't clear in the schema which case applies
though the description usually describes it.

The array of phandles case boils down to needing:

items:
  maxItems: 1

The phandle plus args cases should typically take this form:

items:
  - items:
      - description: A phandle
      - description: 1st arg cell
      - description: 2nd arg cell

With this change, some examples need updating so that the bracketing of
property values matches the schema.

Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Georgi Djakov <djakov@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-ide@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-leds@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-remoteproc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/arm/cpus.yaml         |  2 +
 .../devicetree/bindings/arm/idle-states.yaml  | 80 +++++++++----------
 .../devicetree/bindings/arm/pmu.yaml          |  2 +
 .../bindings/ata/sata_highbank.yaml           |  3 +
 .../bus/allwinner,sun50i-a64-de2.yaml         |  5 +-
 .../bindings/crypto/intel,ixp4xx-crypto.yaml  | 15 +++-
 .../allwinner,sun4i-a10-display-engine.yaml   |  2 +
 .../display/mediatek/mediatek,hdmi.yaml       |  5 +-
 .../devicetree/bindings/display/msm/gpu.yaml  |  2 +
 .../bindings/display/renesas,du.yaml          | 10 ++-
 .../display/rockchip/rockchip-drm.yaml        |  2 +
 .../display/sprd/sprd,display-subsystem.yaml  |  2 +
 .../bindings/display/ti/ti,am65x-dss.yaml     |  3 +-
 .../devicetree/bindings/dma/dma-router.yaml   |  2 +
 .../bindings/dma/st,stm32-dmamux.yaml         |  2 +-
 .../bindings/dvfs/performance-domain.yaml     |  1 -
 .../bindings/interconnect/qcom,rpmh.yaml      |  2 +
 .../interrupt-controller/arm,gic-v3.yaml      |  6 +-
 .../interrupt-controller/ti,sci-inta.yaml     |  2 +
 .../bindings/iommu/mediatek,iommu.yaml        |  6 +-
 .../bindings/iommu/renesas,ipmmu-vmsa.yaml    |  6 ++
 .../leds/backlight/led-backlight.yaml         |  2 +
 .../allwinner,sun4i-a10-video-engine.yaml     |  4 +
 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 10 +--
 .../devicetree/bindings/media/ti,cal.yaml     |  4 +
 .../memory-controllers/mediatek,smi-larb.yaml |  2 +-
 .../samsung,exynos5422-dmc.yaml               |  2 +
 .../net/allwinner,sun4i-a10-emac.yaml         |  4 +
 .../bindings/net/can/bosch,c_can.yaml         |  8 +-
 .../bindings/net/can/fsl,flexcan.yaml         | 12 +--
 .../devicetree/bindings/net/dsa/dsa-port.yaml |  2 +
 .../devicetree/bindings/net/fsl,fec.yaml      |  8 +-
 .../bindings/net/intel,ixp4xx-ethernet.yaml   | 15 +++-
 .../bindings/net/intel,ixp4xx-hss.yaml        | 33 ++++++--
 .../bindings/net/nxp,dwmac-imx.yaml           |  4 +
 .../bindings/net/socionext,uniphier-ave4.yaml |  4 +
 .../devicetree/bindings/net/stm32-dwmac.yaml  |  4 +
 .../bindings/net/ti,k3-am654-cpsw-nuss.yaml   |  5 ++
 .../bindings/net/wireless/mediatek,mt76.yaml  |  4 +
 .../devicetree/bindings/opp/opp-v2-base.yaml  |  2 +
 .../devicetree/bindings/perf/arm,dsu-pmu.yaml |  2 +
 .../bindings/phy/intel,combo-phy.yaml         |  8 ++
 .../devicetree/bindings/phy/ti,omap-usb2.yaml |  4 +
 .../pinctrl/aspeed,ast2500-pinctrl.yaml       |  2 +
 .../bindings/pinctrl/canaan,k210-fpioa.yaml   |  4 +
 .../pinctrl/mediatek,mt65xx-pinctrl.yaml      |  2 +
 .../bindings/pinctrl/st,stm32-pinctrl.yaml    | 10 ++-
 .../bindings/power/power-domain.yaml          |  4 +
 .../bindings/power/renesas,apmu.yaml          |  2 +
 .../power/rockchip,power-controller.yaml      |  2 +
 .../bindings/power/supply/cw2015_battery.yaml |  6 +-
 .../bindings/power/supply/power-supply.yaml   |  2 +
 .../bindings/regulator/regulator.yaml         |  2 +
 .../bindings/regulator/st,stm32-booster.yaml  |  2 +-
 .../bindings/remoteproc/qcom,adsp.yaml        |  6 ++
 .../bindings/remoteproc/st,stm32-rproc.yaml   | 33 ++++++--
 .../bindings/remoteproc/ti,k3-dsp-rproc.yaml  |  2 +
 .../bindings/remoteproc/ti,k3-r5f-rproc.yaml  |  2 +
 .../remoteproc/ti,omap-remoteproc.yaml        | 19 +++--
 .../bindings/soc/samsung/exynos-usi.yaml      |  4 +
 .../bindings/sound/samsung,aries-wm8994.yaml  |  2 +
 .../bindings/sound/samsung,midas-audio.yaml   |  3 +-
 .../bindings/sound/st,stm32-sai.yaml          |  8 +-
 .../thermal/thermal-cooling-devices.yaml      |  6 +-
 .../bindings/thermal/thermal-idle.yaml        |  8 +-
 .../bindings/usb/nvidia,tegra-xudc.yaml       |  2 +-
 66 files changed, 317 insertions(+), 119 deletions(-)

Comments

Viresh Kumar Jan. 19, 2022, 7:44 a.m. UTC | #1
On 18-01-22, 19:50, Rob Herring wrote:
> The 'phandle-array' type is a bit ambiguous. It can be either just an
> array of phandles or an array of phandles plus args. Many schemas for
> phandle-array properties aren't clear in the schema which case applies
> though the description usually describes it.
> 
> The array of phandles case boils down to needing:
> 
> items:
>   maxItems: 1
> 
> The phandle plus args cases should typically take this form:
> 
> items:
>   - items:
>       - description: A phandle
>       - description: 1st arg cell
>       - description: 2nd arg cell
> 
> With this change, some examples need updating so that the bracketing of
> property values matches the schema.
> 

>  .../devicetree/bindings/opp/opp-v2-base.yaml  |  2 +
>  .../bindings/power/power-domain.yaml          |  4 +

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Greg Kroah-Hartman Jan. 19, 2022, 8:24 a.m. UTC | #2
On Tue, Jan 18, 2022 at 07:50:38PM -0600, Rob Herring wrote:
> The 'phandle-array' type is a bit ambiguous. It can be either just an
> array of phandles or an array of phandles plus args. Many schemas for
> phandle-array properties aren't clear in the schema which case applies
> though the description usually describes it.
> 
> The array of phandles case boils down to needing:
> 
> items:
>   maxItems: 1
> 
> The phandle plus args cases should typically take this form:
> 
> items:
>   - items:
>       - description: A phandle
>       - description: 1st arg cell
>       - description: 2nd arg cell
> 
> With this change, some examples need updating so that the bracketing of
> property values matches the schema.
> 
> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Georgi Djakov <djakov@kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: Jingoo Han <jingoohan1@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Marc Kleine-Budde <mkl@pengutronix.de>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Vivien Didelot <vivien.didelot@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Vladimir Oltean <olteanv@gmail.com>
> Cc: Kalle Valo <kvalo@kernel.org>
> Cc: Viresh Kumar <vireshk@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> Cc: Kevin Hilman <khilman@kernel.org>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Jonathan Hunter <jonathanh@nvidia.com>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: linux-ide@vger.kernel.org
> Cc: linux-crypto@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: dmaengine@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: iommu@lists.linux-foundation.org
> Cc: linux-leds@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-can@vger.kernel.org
> Cc: linux-wireless@vger.kernel.org
> Cc: linux-phy@lists.infradead.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-riscv@lists.infradead.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-usb@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven Jan. 19, 2022, 9:42 a.m. UTC | #3
Hi Rob,

On Wed, Jan 19, 2022 at 2:50 AM Rob Herring <robh@kernel.org> wrote:

> The 'phandle-array' type is a bit ambiguous. It can be either just an
> array of phandles or an array of phandles plus args. Many schemas for
> phandle-array properties aren't clear in the schema which case applies
> though the description usually describes it.
>
> The array of phandles case boils down to needing:
>
> items:
>   maxItems: 1
>
> The phandle plus args cases should typically take this form:
>
> items:
>   - items:
>       - description: A phandle
>       - description: 1st arg cell
>       - description: 2nd arg cell
>
> With this change, some examples need updating so that the bracketing of
> property values matches the schema.

> Signed-off-by: Rob Herring <robh@kernel.org>

The Renesas parts look good to me.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Ulf Hansson Jan. 19, 2022, 10:31 a.m. UTC | #4
On Wed, 19 Jan 2022 at 02:50, Rob Herring <robh@kernel.org> wrote:
>
> The 'phandle-array' type is a bit ambiguous. It can be either just an
> array of phandles or an array of phandles plus args. Many schemas for
> phandle-array properties aren't clear in the schema which case applies
> though the description usually describes it.
>
> The array of phandles case boils down to needing:
>
> items:
>   maxItems: 1
>
> The phandle plus args cases should typically take this form:
>
> items:
>   - items:
>       - description: A phandle
>       - description: 1st arg cell
>       - description: 2nd arg cell
>
> With this change, some examples need updating so that the bracketing of
> property values matches the schema.
>
> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Georgi Djakov <djakov@kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: Jingoo Han <jingoohan1@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Marc Kleine-Budde <mkl@pengutronix.de>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Vivien Didelot <vivien.didelot@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Vladimir Oltean <olteanv@gmail.com>
> Cc: Kalle Valo <kvalo@kernel.org>
> Cc: Viresh Kumar <vireshk@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> Cc: Kevin Hilman <khilman@kernel.org>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Jonathan Hunter <jonathanh@nvidia.com>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: linux-ide@vger.kernel.org
> Cc: linux-crypto@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: dmaengine@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: iommu@lists.linux-foundation.org
> Cc: linux-leds@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-can@vger.kernel.org
> Cc: linux-wireless@vger.kernel.org
> Cc: linux-phy@lists.infradead.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-riscv@lists.infradead.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-usb@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---

For CPUs and PM domains:

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe
Georgi Djakov Jan. 19, 2022, 12:09 p.m. UTC | #5
On 19.01.22 3:50, Rob Herring wrote:
> The 'phandle-array' type is a bit ambiguous. It can be either just an
> array of phandles or an array of phandles plus args. Many schemas for
> phandle-array properties aren't clear in the schema which case applies
> though the description usually describes it.
> 
> The array of phandles case boils down to needing:
> 
> items:
>    maxItems: 1
> 
> The phandle plus args cases should typically take this form:
> 
> items:
>    - items:
>        - description: A phandle
>        - description: 1st arg cell
>        - description: 2nd arg cell
> 
> With this change, some examples need updating so that the bracketing of
> property values matches the schema.
> 
[..]
>   .../bindings/interconnect/qcom,rpmh.yaml      |  2 +

Acked-by: Georgi Djakov <djakov@kernel.org>
Arnaud POULIQUEN Jan. 19, 2022, 3:21 p.m. UTC | #6
Hello Rob,

On 1/19/22 2:50 AM, Rob Herring wrote:
> The 'phandle-array' type is a bit ambiguous. It can be either just an
> array of phandles or an array of phandles plus args. Many schemas for
> phandle-array properties aren't clear in the schema which case applies
> though the description usually describes it.
> 
> The array of phandles case boils down to needing:
> 
> items:
>   maxItems: 1
> 
> The phandle plus args cases should typically take this form:
> 
> items:
>   - items:
>       - description: A phandle
>       - description: 1st arg cell
>       - description: 2nd arg cell
> 
> With this change, some examples need updating so that the bracketing of
> property values matches the schema.
> 
> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Georgi Djakov <djakov@kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: Jingoo Han <jingoohan1@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Marc Kleine-Budde <mkl@pengutronix.de>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Vivien Didelot <vivien.didelot@gmail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Vladimir Oltean <olteanv@gmail.com>
> Cc: Kalle Valo <kvalo@kernel.org>
> Cc: Viresh Kumar <vireshk@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> Cc: Kevin Hilman <khilman@kernel.org>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Jonathan Hunter <jonathanh@nvidia.com>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: linux-ide@vger.kernel.org
> Cc: linux-crypto@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: dmaengine@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: iommu@lists.linux-foundation.org
> Cc: linux-leds@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-can@vger.kernel.org
> Cc: linux-wireless@vger.kernel.org
> Cc: linux-phy@lists.infradead.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-riscv@lists.infradead.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-usb@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---

[...]

>  .../bindings/remoteproc/st,stm32-rproc.yaml   | 33 ++++++--

[...]

> diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> index b587c97c282b..be3d9b0e876b 100644
> --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> @@ -29,17 +29,22 @@ properties:
>  
>    st,syscfg-holdboot:
>      description: remote processor reset hold boot
> -      - Phandle of syscon block.
> -      - The offset of the hold boot setting register.
> -      - The field mask of the hold boot.
>      $ref: "/schemas/types.yaml#/definitions/phandle-array"
> -    maxItems: 1
> +    items:
> +      - items:
> +          - description: Phandle of syscon block
> +          - description: The offset of the hold boot setting register
> +          - description: The field mask of the hold boot
>  
>    st,syscfg-tz:
>      description:
>        Reference to the system configuration which holds the RCC trust zone mode
>      $ref: "/schemas/types.yaml#/definitions/phandle-array"
> -    maxItems: 1
> +    items:
> +      - items:
> +          - description: Phandle of syscon block
> +          - description: FIXME
> +          - description: FIXME

         - description: The offset of the trust zone setting register
         - description: The field mask of the trust zone state

>  
>    interrupts:
>      description: Should contain the WWDG1 watchdog reset interrupt
> @@ -93,20 +98,32 @@ properties:
>      $ref: "/schemas/types.yaml#/definitions/phandle-array"
>      description: |
>        Reference to the system configuration which holds the remote
> -    maxItems: 1
> +    items:
> +      - items:
> +          - description: Phandle of syscon block
> +          - description: FIXME
> +          - description: FIXME

         - description: The offset of the power setting register
         - description: The field mask of the PDDS selection

>  
>    st,syscfg-m4-state:
>      $ref: "/schemas/types.yaml#/definitions/phandle-array"
>      description: |
>        Reference to the tamp register which exposes the Cortex-M4 state.
> -    maxItems: 1
> +    items:
> +      - items:
> +          - description: Phandle of syscon block with the tamp register
> +          - description: FIXME
> +          - description: FIXME

         - description: The offset of the tamp register
         - description: The field mask of the Cortex-M4 state

>  
>    st,syscfg-rsc-tbl:
>      $ref: "/schemas/types.yaml#/definitions/phandle-array"
>      description: |
>        Reference to the tamp register which references the Cortex-M4
>        resource table address.
> -    maxItems: 1
> +    items:
> +      - items:
> +          - description: Phandle of syscon block with the tamp register
> +          - description: FIXME
> +          - description: FIXME

         - description: The offset of the tamp register
         - description: The field mask of the Cortex-M4 resource table address

Please tell me if you prefer that I fix this in a dedicated patch.

Thanks,
Arnaud
Rob Herring Jan. 19, 2022, 3:28 p.m. UTC | #7
On Wed, Jan 19, 2022 at 4:35 AM Vladimir Oltean <olteanv@gmail.com> wrote:
>
> On Tue, Jan 18, 2022 at 07:50:38PM -0600, Rob Herring wrote:
> > The 'phandle-array' type is a bit ambiguous. It can be either just an
> > array of phandles or an array of phandles plus args. Many schemas for
> > phandle-array properties aren't clear in the schema which case applies
> > though the description usually describes it.
> >
> > The array of phandles case boils down to needing:
> >
> > items:
> >   maxItems: 1
> >
> > The phandle plus args cases should typically take this form:
> >
> > items:
> >   - items:
> >       - description: A phandle
> >       - description: 1st arg cell
> >       - description: 2nd arg cell
> >
> > With this change, some examples need updating so that the bracketing of
> > property values matches the schema.
> > ---
> (...)
> > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > index 702df848a71d..c504feeec6db 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > @@ -34,6 +34,8 @@ properties:
> >        full routing information must be given, not just the one hop
> >        routes to neighbouring switches
> >      $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    items:
> > +      maxItems: 1
> >
> >    ethernet:
> >      description:
>
> For better or worse, the mainline cases of this property all take the
> form of:
>
> arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
>                                 link = <&switch1port9 &switch2port9>;
>                                 link = <&switch1port10 &switch0port10>;
> arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
>                                                 link = <&switch1port6
>                                                         &switch2port9>;
>                                                 link = <&switch1port5
>                                                         &switch0port5>;
> arch/arm/boot/dts/vf610-zii-scu4-aib.dts
>                                                 link = <&switch1port10
>                                                         &switch3port10
>                                                         &switch2port10>;
>                                                 link = <&switch3port10
>                                                         &switch2port10>;
>                                                 link = <&switch1port9
>                                                         &switch0port10>;
>
> So not really an array of phandles.

Either form is an array. The DT yaml encoding maintains the
bracketing, so how the schema is defined matters. To some extent the
tools will process the schema to support both forms of bracketing, but
this has turned out to be fragile and just doesn't work for phandle
arrays. I'm working on further changes that will get rid of the yaml
encoded DT format and validate DTB files directly. These obviously
have no bracketing and needing the DTS source files to change goes
away. However, to be able to construct the internal format for
validation, I do need the schemas to have more information on what
exactly the phandle-array contains.

Rob
Mark Brown Jan. 19, 2022, 3:45 p.m. UTC | #8
On Tue, Jan 18, 2022 at 07:50:38PM -0600, Rob Herring wrote:
> The 'phandle-array' type is a bit ambiguous. It can be either just an
> array of phandles or an array of phandles plus args. Many schemas for
> phandle-array properties aren't clear in the schema which case applies
> though the description usually describes it.

Acked-by: Mark Brown <broonie@kernel.org>
Vinod Koul Jan. 20, 2022, 4:38 a.m. UTC | #9
On 18-01-22, 19:50, Rob Herring wrote:
> The 'phandle-array' type is a bit ambiguous. It can be either just an
> array of phandles or an array of phandles plus args. Many schemas for
> phandle-array properties aren't clear in the schema which case applies
> though the description usually describes it.
> 
> The array of phandles case boils down to needing:
> 
> items:
>   maxItems: 1
> 
> The phandle plus args cases should typically take this form:
> 
> items:
>   - items:
>       - description: A phandle
>       - description: 1st arg cell
>       - description: 2nd arg cell
> 
> With this change, some examples need updating so that the bracketing of
> property values matches the schema.

Acked-By: Vinod Koul <vkoul@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 0dcebc48ea22..916a5aebefff 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -243,6 +243,8 @@  properties:
 
   cpu-idle-states:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      maxItems: 1
     description: |
       List of phandles to idle state nodes supported
       by this cpu (see ./idle-states.yaml).
diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml
index 52bce5dbb11f..4d381fa1ee57 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.yaml
+++ b/Documentation/devicetree/bindings/arm/idle-states.yaml
@@ -337,8 +337,8 @@  examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x0>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@1 {
@@ -346,8 +346,8 @@  examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x1>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@100 {
@@ -355,8 +355,8 @@  examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x100>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@101 {
@@ -364,8 +364,8 @@  examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x101>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@10000 {
@@ -373,8 +373,8 @@  examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x10000>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@10001 {
@@ -382,8 +382,8 @@  examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x10001>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@10100 {
@@ -391,8 +391,8 @@  examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x10100>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@10101 {
@@ -400,8 +400,8 @@  examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x10101>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@100000000 {
@@ -409,8 +409,8 @@  examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x0>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100000001 {
@@ -418,8 +418,8 @@  examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x1>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100000100 {
@@ -427,8 +427,8 @@  examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x100>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100000101 {
@@ -436,8 +436,8 @@  examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x101>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100010000 {
@@ -445,8 +445,8 @@  examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x10000>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100010001 {
@@ -454,8 +454,8 @@  examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x10001>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100010100 {
@@ -463,8 +463,8 @@  examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x10100>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100010101 {
@@ -472,8 +472,8 @@  examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x10101>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         idle-states {
@@ -567,56 +567,56 @@  examples:
             device_type = "cpu";
             compatible = "arm,cortex-a15";
             reg = <0x0>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
         };
 
         cpu@1 {
             device_type = "cpu";
             compatible = "arm,cortex-a15";
             reg = <0x1>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
         };
 
         cpu@2 {
             device_type = "cpu";
             compatible = "arm,cortex-a15";
             reg = <0x2>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
         };
 
         cpu@3 {
             device_type = "cpu";
             compatible = "arm,cortex-a15";
             reg = <0x3>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
         };
 
         cpu@100 {
             device_type = "cpu";
             compatible = "arm,cortex-a7";
             reg = <0x100>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
         };
 
         cpu@101 {
             device_type = "cpu";
             compatible = "arm,cortex-a7";
             reg = <0x101>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
         };
 
         cpu@102 {
             device_type = "cpu";
             compatible = "arm,cortex-a7";
             reg = <0x102>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
         };
 
         cpu@103 {
             device_type = "cpu";
             compatible = "arm,cortex-a7";
             reg = <0x103>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
         };
 
         idle-states {
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
index 981bac451698..2e2308d73408 100644
--- a/Documentation/devicetree/bindings/arm/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -66,6 +66,8 @@  properties:
 
   interrupt-affinity:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       When using SPIs, specifies a list of phandles to CPU
       nodes corresponding directly to the affinity of
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
index ce75d77e9289..49679b58041c 100644
--- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
@@ -51,6 +51,9 @@  properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 8
+    items:
+      minItems: 2
+      maxItems: 2
 
   calxeda,tx-atten:
     description: |
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
index 863a287ebc7e..ad313ccaaaef 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
@@ -35,7 +35,10 @@  properties:
       The SRAM that needs to be claimed to access the display engine
       bus.
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
 
   ranges: true
 
diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
index 9c53c27bd20a..e0fe63957888 100644
--- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -22,19 +22,28 @@  properties:
 
   intel,npe-handle:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the NPE this crypto engine
+          - description: the NPE instance number
     description: phandle to the NPE this crypto engine is using, the cell
       describing the NPE instance to be used.
 
   queue-rx:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
     description: phandle to the RX queue on the NPE, the cell describing
       the queue instance to be used.
 
   queue-txready:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TX READY queue on the NPE
+          - description: the queue instance number
     description: phandle to the TX READY queue on the NPE, the cell describing
       the queue instance to be used.
 
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
index e77523b02fad..d4412aea7b73 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -69,6 +69,8 @@  properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 2
+    items:
+      maxItems: 1
     description: |
       Available display engine frontends (DE 1.0) or mixers (DE
       2.0/3.0) available.
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
index 111967efa999..bdaf0b51e68c 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -51,7 +51,10 @@  properties:
 
   mediatek,syscon-hdmi:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to system configuration registers
+          - description: register offset in the system configuration registers
     description: |
       phandle link and register offset to the system configuration registers.
 
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 99a1ba3ada56..3397bc31d087 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -64,6 +64,8 @@  properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 4
+    items:
+      maxItems: 1
     description: |
       phandles to one or more reserved on-chip SRAM regions.
       phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
index 13efea574584..56cedcd6d576 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@@ -76,17 +76,21 @@  properties:
 
   renesas,cmms:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      maxItems: 1
     description:
       A list of phandles to the CMM instances present in the SoC, one for each
       available DU channel.
 
   renesas,vsps:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
     description:
       A list of phandle and channel index tuples to the VSPs that handle the
-      memory interfaces for the DU channels. The phandle identifies the VSP
-      instance that serves the DU channel, and the channel index identifies
-      the LIF instance in that VSP.
+      memory interfaces for the DU channels.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
index 7204da5eb4c5..a8d18a37cb23 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -21,6 +21,8 @@  properties:
 
   ports:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Should contain a list of phandles pointing to display interface port
       of vop devices. vop definitions as defined in
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
index 3d107e9434be..d0a5592bd89d 100644
--- a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
@@ -45,6 +45,8 @@  properties:
 
   ports:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Should contain a list of phandles pointing to display interface port
       of DPU devices.
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index 781c1868b0b8..5c7d2cbc4aac 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -88,8 +88,7 @@  properties:
           The DSS DPI output port node from video port 2
 
   ti,am65x-oldi-io-ctrl:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
-    maxItems: 1
+    $ref: "/schemas/types.yaml#/definitions/phandle"
     description:
       phandle to syscon device node mapping OLDI IO_CTRL registers.
       The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
index e72748496fd9..4b817f5dc30e 100644
--- a/Documentation/devicetree/bindings/dma/dma-router.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -24,6 +24,8 @@  properties:
 
   dma-masters:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Array of phandles to the DMA controllers the router can direct
       the signal to.
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index f751796531c9..7b1833d6caa2 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -46,7 +46,7 @@  examples:
       #dma-cells = <3>;
       dma-requests = <128>;
       dma-channels = <16>;
-      dma-masters = <&dma1 &dma2>;
+      dma-masters = <&dma1>, <&dma2>;
       clocks = <&timer_clk>;
     };
 
diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
index c8b91207f34d..7959d40ded5a 100644
--- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
+++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
@@ -43,7 +43,6 @@  properties:
 
   performance-domains:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
     description:
       A phandle and performance domain specifier as defined by bindings of the
       performance controller/provider specified by phandle.
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index cbb24f9bb609..5a911be0c2ea 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -121,6 +121,8 @@  properties:
 
   qcom,bcm-voters:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       List of phandles to qcom,bcm-voter nodes that are required by
       this interconnect to send RPMh commands.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index cfb3ec27bd2b..b7197f78e158 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -138,6 +138,8 @@  properties:
         properties:
           affinity:
             $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              maxItems: 1
             description:
               Should be a list of phandles to CPU nodes (as described in
               Documentation/devicetree/bindings/arm/cpus.yaml).
@@ -273,11 +275,11 @@  examples:
 
       ppi-partitions {
         part0: interrupt-partition-0 {
-          affinity = <&cpu0 &cpu2>;
+          affinity = <&cpu0>, <&cpu2>;
         };
 
         part1: interrupt-partition-1 {
-          affinity = <&cpu1 &cpu3>;
+          affinity = <&cpu1>, <&cpu3>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
index 3d89668573e8..88c46e61732e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -77,6 +77,8 @@  properties:
 
   ti,unmapped-event-sources:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Array of phandles to DMA controllers where the unmapped events originate.
 
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
index 0f26fe14c8e2..97e8c471a5e8 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
@@ -101,6 +101,8 @@  properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 32
+    items:
+      maxItems: 1
     description: |
       List of phandle to the local arbiters in the current Socs.
       Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort
@@ -167,8 +169,8 @@  examples:
             interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
             clocks = <&infracfg CLK_INFRA_M4U>;
             clock-names = "bclk";
-            mediatek,larbs = <&larb0 &larb1 &larb2
-                              &larb3 &larb4 &larb5>;
+            mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+                             <&larb3>, <&larb4>, <&larb5>;
             #iommu-cells = <1>;
     };
 
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
index ce0c715205c6..507853fcc746 100644
--- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -66,6 +66,12 @@  properties:
 
   renesas,ipmmu-main:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to main IPMMU
+          - description: the interrupt bit number associated with the particular 
+              cache IPMMU device. The interrupt bit number needs to match the main 
+              IPMMU IMSSTR register. Only used by cache IPMMU instances.
     description:
       Reference to the main IPMMU phandle plus 1 cell. The cell is
       the interrupt bit number associated with the particular cache IPMMU
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
index 625082bf3892..f5822f4ea667 100644
--- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
@@ -23,6 +23,8 @@  properties:
   leds:
     description: A list of LED nodes
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
 
   brightness-levels:
     description:
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
index c3de96d10396..ee7fc3515d89 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -48,6 +48,10 @@  properties:
 
   allwinner,sram:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
     description: Phandle to the device SRAM
 
   iommus:
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index 9c04fa85ee5c..d13c9233a7c8 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -58,11 +58,11 @@  properties:
       req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The 'gpr' is the phandle to general purpose register node.
-        - description: The 'req_gpr' is the gpr register offset containing
-                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
-          maximum: 0xff
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset containing
+                        CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+            maximum: 0xff
 
   interconnects:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index 66c5d392fa75..7e078424ca4d 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -48,6 +48,10 @@  properties:
 
   ti,camerrx-control:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: phandle to device control module
+          - description: offset to the control_camerarx_core register
     description:
       phandle to the device control module and offset to the
       control_camerarx_core register
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index eaeff1ada7f8..822ade9e9bab 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -52,7 +52,7 @@  properties:
     maxItems: 1
 
   mediatek,smi:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: a phandle to the smi_common node.
 
   mediatek,larb-id:
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
index fe8639dcffab..895c3b5c9aaa 100644
--- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -45,6 +45,8 @@  properties:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     minItems: 1
     maxItems: 16
+    items:
+      maxItems: 1
     description: phandles of the PPMU events used by the controller.
 
   device-handle:
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
index 8d8560a67abf..098b2bf7d976 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
@@ -29,6 +29,10 @@  properties:
   allwinner,sram:
     description: Phandle to the device SRAM
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
index 2cd145a642f1..8bad328b184d 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
@@ -56,10 +56,10 @@  properties:
       offset).
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The phandle to the system control region.
-        - description: The register offset.
-        - description: The CAN instance number.
+      - items:
+          - description: The phandle to the system control region.
+          - description: The register offset.
+          - description: The CAN instance number.
 
   resets:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
index 3f0ee17c1461..e52db841bb8c 100644
--- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -84,12 +84,12 @@  properties:
       req_bit is the bit offset of CAN stop request.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The 'gpr' is the phandle to general purpose register node.
-        - description: The 'req_gpr' is the gpr register offset of CAN stop request.
-          maximum: 0xff
-        - description: The 'req_bit' is the bit offset of CAN stop request.
-          maximum: 0x1f
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+            maximum: 0xff
+          - description: The 'req_bit' is the bit offset of CAN stop request.
+            maximum: 0x1f
 
   fsl,clk-source:
     description: |
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
index 702df848a71d..c504feeec6db 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -34,6 +34,8 @@  properties:
       full routing information must be given, not just the one hop
       routes to neighbouring switches
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
 
   ethernet:
     description:
diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml
index fd8371e31867..daa2f79a294f 100644
--- a/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -158,11 +158,13 @@  properties:
 
   fsl,stop-mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to general purpose register node
+          - description: the gpr register offset for ENET stop request
+          - description: the gpr bit offset for ENET stop request
     description:
       Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
-      gpr is the phandle to general purpose register node.
-      req_gpr is the gpr register offset for ENET stop request.
-      req_bit is the gpr bit offset for ENET stop request.
 
   mdio:
     $ref: mdio.yaml#
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
index 67eaf02dda80..4e1b79818aff 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -29,12 +29,18 @@  properties:
 
   queue-rx:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX queue node
+          - description: RX queue instance to use
     description: phandle to the RX queue on the NPE
 
   queue-txready:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TX READY queue node
+          - description: TX READY queue instance to use
     description: phandle to the TX READY queue on the NPE
 
   phy-mode: true
@@ -43,7 +49,10 @@  properties:
 
   intel,npe-handle:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the NPE this ethernet instance is using
+          - description: the NPE instance to use
     description: phandle to the NPE this ethernet instance is using
       and the instance to use in the second cell
 
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
index 4dcd53c3e0b4..e6329febb60c 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
@@ -25,39 +25,62 @@  properties:
 
   intel,npe-handle:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      items:
+        - description: phandle to the NPE this HSS instance is using
+        - description: the NPE instance number
     description: phandle to the NPE this HSS instance is using
       and the instance to use in the second cell
 
   intel,queue-chl-rxtrig:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX trigger queue on the NPE
+          - description: the queue instance number
     description: phandle to the RX trigger queue on the NPE
 
   intel,queue-chl-txready:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TX ready queue on the NPE
+          - description: the queue instance number
     description: phandle to the TX ready queue on the NPE
 
   intel,queue-pkt-rx:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
     description: phandle to the packet RX queue on the NPE
 
   intel,queue-pkt-tx:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     maxItems: 4
+    items:
+      items:
+        - description: phandle to the TX queue on the NPE
+        - description: the queue instance number
     description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE
 
   intel,queue-pkt-rxfree:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     maxItems: 4
+    items:
+      items:
+        - description: phandle to the RXFREE queue on the NPE
+        - description: the queue instance number
     description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and
       RXFREE3 queues on the NPE
 
   intel,queue-pkt-txdone:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TXDONE queue on the NPE
+          - description: the queue instance number
     description: phandle to the packet TXDONE queue on the NPE
 
   cts-gpios:
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
index ee4afe361fac..011363166789 100644
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -54,6 +54,10 @@  properties:
 
   intf_mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the GPR syscon
+          - description: the offset of the GPR register
     description:
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the GPR register, and the offset of the GPR register.
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
index aad5a9f3f962..1ab41cfdb865 100644
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
@@ -66,6 +66,10 @@  properties:
 
   socionext,syscon-phy-mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures phy mode
+          - description: ID of MAC instance 
     description:
       A phandle to syscon with one argument that configures phy mode.
       The argument is the ID of MAC instance.
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index 3d8a3b763ae6..89a858de68af 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -74,6 +74,10 @@  properties:
 
   st,syscon:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: phandle to the syscon node which encompases the glue register
+          - description: offset of the control register 
     description:
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the glue register, and the offset of the control register
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 4b97a0f1175b..c6596fad5b20 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -136,6 +136,11 @@  properties:
 
           ti,syscon-efuse:
             $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              - items:
+                  - description: Phandle to the system control device node which 
+                      provides access to efuse
+                  - description: offset to efuse registers??? 
             description:
               Phandle to the system control device node which provides access
               to efuse IO range with MAC addresses
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
index 269cd63fb544..42e1f4dddca8 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -54,6 +54,10 @@  properties:
 
   mediatek,mtd-eeprom:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to MTD partition
+          - description: offset containing EEPROM data
     description:
       Phandle to a MTD partition + offset containing EEPROM data
 
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
index 15a76bcd6d42..da0f09eedc0c 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -177,6 +177,8 @@  patternProperties:
           for the functioning of the current device at the current OPP (where
           this property is present).
         $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
 
     patternProperties:
       '^opp-microvolt-':
diff --git a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
index aef63a542f34..c87821be158b 100644
--- a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
+++ b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
@@ -35,6 +35,8 @@  properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 12
+    items:
+      maxItems: 1
     description: List of phandles for the CPUs connected to this DSU instance.
 
 required:
diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
index 347d0cdfb80d..5d54b0a0e873 100644
--- a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -47,10 +47,18 @@  properties:
 
   intel,syscfg:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to Chip configuration registers
+          - description: ComboPhy instance id
     description: Chip configuration registers handle and ComboPhy instance id
 
   intel,hsio:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to HSIO registers
+          - description: ComboPhy instance id
     description: HSIO registers handle and ComboPhy instance id on NOC
 
   intel,aggregation:
diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
index cbbf5e8b1197..51c8a36e61f0 100644
--- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -45,6 +45,10 @@  properties:
 
   syscon-phy-power:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the system control module
+          - description: register offset to power on/off the PHY
     description:
       phandle/offset pair. Phandle to the system control module and
       register offset to power on/off the PHY.
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index d316cc082107..acd60c85b4cc 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -29,6 +29,8 @@  properties:
   aspeed,external-nodes:
     minItems: 2
     maxItems: 2
+    items:
+      maxItems: 1
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: |
       A cell of phandles to external controller nodes:
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
index a44691d9c57d..53e963e090f2 100644
--- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
@@ -39,6 +39,10 @@  properties:
 
   canaan,k210-sysctl-power:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of the K210 system controller node
+          - description: offset of its power domain control register
     description: |
       phandle of the K210 system controller node and offset of its
       power domain control register.
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index 6953c958ff7c..161088a8be33 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -44,6 +44,8 @@  properties:
 
   mediatek,pctl-regmap:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     minItems: 1
     maxItems: 2
     description: |
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index 83a18d0331b1..335ffc1353b5 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -41,11 +41,13 @@  properties:
     maxItems: 1
 
   st,syscfg:
-    description: Should be phandle/offset/mask
-      - Phandle to the syscon node which includes IRQ mux selection.
-      - The offset of the IRQ mux selection register.
-      - The field mask of IRQ mux, needed if different of 0xf.
+    description: Phandle+args to the syscon node which includes IRQ mux selection.
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: syscon node which includes IRQ mux selection
+          - description: The offset of the IRQ mux selection register
+          - description: The field mask of IRQ mux, needed if different of 0xf
 
   st,package:
     description:
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
index 3143ed9a3313..889091b9814f 100644
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -29,6 +29,8 @@  properties:
 
   domain-idle-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Phandles of idle states that defines the available states for the
       power-domain provider. The idle state definitions are compatible with the
@@ -42,6 +44,8 @@  properties:
 
   operating-points-v2:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Phandles to the OPP tables of power domains provided by a power domain
       provider. If the provider provides a single power domain only or all
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
index 391897d897f2..4d293b2b2f84 100644
--- a/Documentation/devicetree/bindings/power/renesas,apmu.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
@@ -35,6 +35,8 @@  properties:
 
   cpus:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Array of phandles pointing to CPU cores, which should match the order of
       CPU cores used by the WUPCR and PSTR registers in the Advanced Power
diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
index 9b9d71087466..3deb0fc8dfd3 100644
--- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -129,6 +129,8 @@  $defs:
 
       pm_qos:
         $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
         description: |
           A number of phandles to qos blocks which need to be saved and restored
           while power domain switches state.
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index c73abb2ff513..2dda91587dc3 100644
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -14,6 +14,9 @@  description: |
   phandle in monitored-battery. If specified the driver uses the
   charge-full-design-microamp-hours property of the battery.
 
+allOf:
+  - $ref: power-supply.yaml#
+
 properties:
   compatible:
     const: cellwise,cw2015
@@ -37,9 +40,6 @@  properties:
     minimum: 250
 
   power-supplies:
-    description:
-      Specifies supplies used for charging the battery connected to this gauge
-    $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 8 # Should be enough
 
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
index 259760167759..531b67225c74 100644
--- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -12,6 +12,8 @@  maintainers:
 properties:
   power-supplies:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       This property is added to a supply in order to list the devices which
       supply it power, referenced by their phandles.
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index ed560ee8714e..a9b66ececccf 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -213,6 +213,8 @@  properties:
       is 2-way - all coupled regulators should be linked with each other.
       A regulator should not be coupled with its supplier.
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      maxItems: 1
 
   regulator-coupled-max-spread:
     description: Array of maximum spread between voltages of coupled regulators
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
index df0191b1ceba..38bdaef4fa39 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -23,7 +23,7 @@  properties:
       - st,stm32mp1-booster
 
   st,syscfg:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: "/schemas/types.yaml#/definitions/phandle"
     description: phandle to system configuration controller.
 
   vdda-supply:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index c635c181d2c2..bcad8f4080d4 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -115,6 +115,12 @@  properties:
 
   qcom,halt-regs:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offsets within syscon for q6 halt registers
+          - description: offsets within syscon for modem halt registers
+          - description: offsets within syscon for nc halt registers
     description:
       Phandle reference to a syscon representing TCSR followed by the
       three offsets within syscon for q6, modem and nc halt registers.
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index b587c97c282b..be3d9b0e876b 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -29,17 +29,22 @@  properties:
 
   st,syscfg-holdboot:
     description: remote processor reset hold boot
-      - Phandle of syscon block.
-      - The offset of the hold boot setting register.
-      - The field mask of the hold boot.
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the hold boot setting register
+          - description: The field mask of the hold boot
 
   st,syscfg-tz:
     description:
       Reference to the system configuration which holds the RCC trust zone mode
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: FIXME
+          - description: FIXME
 
   interrupts:
     description: Should contain the WWDG1 watchdog reset interrupt
@@ -93,20 +98,32 @@  properties:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: |
       Reference to the system configuration which holds the remote
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: FIXME
+          - description: FIXME
 
   st,syscfg-m4-state:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: |
       Reference to the tamp register which exposes the Cortex-M4 state.
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block with the tamp register
+          - description: FIXME
+          - description: FIXME
 
   st,syscfg-rsc-tbl:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: |
       Reference to the tamp register which references the Cortex-M4
       resource table address.
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block with the tamp register
+          - description: FIXME
+          - description: FIXME
 
   st,auto-boot:
     $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
index 7b56497eec4d..4323cefdf19b 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -79,6 +79,8 @@  properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 4
+    items:
+      maxItems: 1
     description: |
       phandles to one or more reserved on-chip SRAM regions. The regions
       should be defined as child nodes of the respective SRAM node, and
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index d9c7e8c2b268..0f2bb06cb7b4 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -189,6 +189,8 @@  patternProperties:
         $ref: /schemas/types.yaml#/definitions/phandle-array
         minItems: 1
         maxItems: 4
+        items:
+          maxItems: 1
         description: |
           phandles to one or more reserved on-chip SRAM regions. The regions
           should be defined as child nodes of the respective SRAM node, and
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
index c6c12129d6b7..1fdc2741c36e 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
@@ -123,13 +123,14 @@  properties:
 
   ti,bootreg:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: |
-      Should be a triple of the phandle to the System Control
-      Configuration region that contains the boot address
-      register, the register offset of the boot address
-      register within the System Control module, and the bit
-      shift within the register. This property is required for
-      all the DSP instances on OMAP4, OMAP5 and DRA7xx SoCs.
+    items:
+      - items:
+          - description: phandle to the System Control Configuration region
+          - description: register offset of the boot address register
+          - description: the bit shift within the register
+    description:
+      This property is required for all the DSP instances on OMAP4, OMAP5
+      and DRA7xx SoCs.
 
   ti,autosuspend-delay-ms:
     description: |
@@ -140,6 +141,8 @@  properties:
 
   ti,timers:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       One or more phandles to OMAP DMTimer nodes, that serve
       as System/Tick timers for the OS running on the remote
@@ -156,6 +159,8 @@  properties:
 
   ti,watchdog-timers:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       One or more phandles to OMAP DMTimer nodes, used to
       serve as Watchdog timers for the processor cores. This
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
index 273f2d95a043..58f2e9d8bb0e 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -48,6 +48,10 @@  properties:
 
   samsung,sysreg:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register syscon node
+          - description: offset of SW_CONF register for this USI controller
     description:
       Should be phandle/offset pair. The phandle to System Register syscon node
       (for the same domain where this USI controller resides) and the offset
diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
index 5fff586dc802..eb487ed3ca3b 100644
--- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
@@ -27,6 +27,8 @@  properties:
       sound-dai:
         minItems: 2
         maxItems: 2
+        items:
+          maxItems: 1
         $ref: /schemas/types.yaml#/definitions/phandle-array
         description: |
           phandles to the I2S controller and bluetooth codec,
diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
index 095775c598fa..3a4df2ce1728 100644
--- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
@@ -21,8 +21,7 @@  properties:
     type: object
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
-        maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/phandle
         description: phandle to the I2S controller
     required:
       - sound-dai
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 1538d11ce9a8..d4fc8fdcb72f 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -102,9 +102,11 @@  patternProperties:
           By default SAI sub-block is in asynchronous mode.
           Must contain the phandle and index of the SAI sub-block providing
           the synchronization.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/phandle-array
-          - maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          - items:
+              - description: phandle of the SAI sub-block
+              - description: index of the SAI sub-block
 
       st,iec60958:
         description:
diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
index f004779ba9b3..850a9841b110 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
@@ -66,9 +66,9 @@  examples:
                     compatible = "qcom,kryo385";
                     reg = <0x0 0x0>;
                     enable-method = "psci";
-                    cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-                                       &LITTLE_CPU_SLEEP_1
-                                       &CLUSTER_SLEEP_0>;
+                    cpu-idle-states = <&LITTLE_CPU_SLEEP_0>,
+                                      <&LITTLE_CPU_SLEEP_1>,
+                                      <&CLUSTER_SLEEP_0>;
                     capacity-dmips-mhz = <607>;
                     dynamic-power-coefficient = <100>;
                     qcom,freq-domain = <&cpufreq_hw 0>;
diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
index 6278ccf16f3f..cc938d7ad1f3 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
@@ -37,8 +37,8 @@  properties:
 
   exit-latency-us:
     description: |
-      The exit latency constraint in microsecond for the injected idle state 
-      for the device. It is the latency constraint to apply when selecting an 
+      The exit latency constraint in microsecond for the injected idle state
+      for the device. It is the latency constraint to apply when selecting an
       idle state from among all the present ones.
 
 required:
@@ -65,7 +65,7 @@  examples:
                          capacity-dmips-mhz = <1024>;
                          dynamic-power-coefficient = <436>;
                          #cooling-cells = <2>; /* min followed by max */
-                         cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+                         cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
                          thermal-idle {
                                  #cooling-cells = <2>;
                                  duration-us = <10000>;
@@ -81,7 +81,7 @@  examples:
                         capacity-dmips-mhz = <1024>;
                         dynamic-power-coefficient = <436>;
                         #cooling-cells = <2>; /* min followed by max */
-                        cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+                        cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
                         thermal-idle {
                                 #cooling-cells = <2>;
                                 duration-us = <10000>;
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
index a39c76b89484..fd6e7c81426e 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -83,7 +83,7 @@  properties:
       - const: ss
 
   nvidia,xusb-padctl:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       phandle to the XUSB pad controller that is used to configure the USB pads
       used by the XUDC controller.