diff mbox series

[v5,1/4] ARM: dts: exynos: split dmas into array of phandles in Exynos5250

Message ID 20220120175747.43403-2-krzysztof.kozlowski@canonical.com
State Superseded
Headers show
Series spi: dt-bindings: samsung: convert to dtschema | expand

Commit Message

Krzysztof Kozlowski Jan. 20, 2022, 5:57 p.m. UTC 
"dmas" property should be rather an array of phandles, as dtschema
points.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 arch/arm/boot/dts/exynos5250.dtsi | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

Comments

Krzysztof Kozlowski Jan. 23, 2022, 5:10 p.m. UTC | #1 
On Thu, 20 Jan 2022 18:57:44 +0100, Krzysztof Kozlowski wrote:
> "dmas" property should be rather an array of phandles, as dtschema
> points.
> 
> 

Applied, thanks!

[1/4] ARM: dts: exynos: split dmas into array of phandles in Exynos5250
      commit: 88829baee3db050a06fd5ce8a2be0c39992f90da

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 139778928b93..102bb57bf704 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -496,8 +496,7 @@  spi_0: spi@12d20000 {
 			status = "disabled";
 			reg = <0x12d20000 0x100>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5
-				&pdma0 4>;
+			dmas = <&pdma0 5>, <&pdma0 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -512,8 +511,7 @@  spi_1: spi@12d30000 {
 			status = "disabled";
 			reg = <0x12d30000 0x100>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5
-				&pdma1 4>;
+			dmas = <&pdma1 5>, <&pdma1 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -528,8 +526,7 @@  spi_2: spi@12d40000 {
 			status = "disabled";
 			reg = <0x12d40000 0x100>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7
-				&pdma0 6>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;