| Message ID | 20220123111644.25540-9-krzysztof.kozlowski@canonical.com |
|---|---|
| State | New |
| Headers | show |
| Series | [01/12] arm64: dts: exynos: add USB DWC3 supplies to Espresso board | expand |
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 77013ee586f8..fd6f80a9c64e 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -1072,6 +1072,16 @@ &tmu_gpu { vtmu-supply = <&ldo10_reg>; }; +&usbdrd3_0 { + vdd10-supply = <&ldo15_reg>; + vdd33-supply = <&ldo12_reg>; +}; + +&usbdrd3_1 { + vdd10-supply = <&ldo15_reg>; + vdd33-supply = <&ldo12_reg>; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; };
Add required voltage regulators for USB DWC3 block on Exynos5800 Chromebook Peach Pi board. Due to lack of board schematics, use same regulators as on Odroid XU board (using same MAX77802 PMIC). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- arch/arm/boot/dts/exynos5800-peach-pi.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)