diff mbox

[V3,1/3] arm64: dts: Add reset dts config for Hisilicon Hi6220 SoC

Message ID 1442289504-183550-1-git-send-email-puck.chen@hisilicon.com
State New
Headers show

Commit Message

Chen Feng Sept. 15, 2015, 3:58 a.m. UTC
Add reset controller for hi6220 hikey-board.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Philipp Zabel Sept. 15, 2015, 9:10 a.m. UTC | #1
Am Dienstag, den 15.09.2015, 11:58 +0800 schrieb Chen Feng:
> Add reset controller for hi6220 hikey-board.
> 
> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 3f03380..3bbc846 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -167,5 +167,12 @@
>  			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
>  			clock-names = "uartclk", "apb_pclk";
>  		};
> +
> +		reset_ctrl: reset_ctrl@f7030000 {
> +			compatible = "hisilicon,hi6220_reset_ctl";

Check out the other compatible strings that already are in the same dtsi
file, those use hyphens instead of underscores in their compatible
values. So for consistency, this should be:

+			compatible = "hisilicon,hi6220-reset-ctl";

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 3f03380..3bbc846 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -167,5 +167,12 @@ 
 			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
 			clock-names = "uartclk", "apb_pclk";
 		};
+
+		reset_ctrl: reset_ctrl@f7030000 {
+			compatible = "hisilicon,hi6220_reset_ctl";
+			reg = <0x0 0xf7030000 0x0 0x1000>;
+			#reset-cells = <1>;
+		};
+
 	};
 };