@@ -134,9 +134,12 @@ struct extra_context {
struct sve_context {
struct _aarch64_ctx head;
__u16 vl;
- __u16 __reserved[3];
+ __u16 flags;
+ __u16 __reserved[2];
};
+#define SVE_SIG_FLAG_SM 0x1 /* Context describes streaming mode */
+
#endif /* !__ASSEMBLY__ */
#include <asm/sve_context.h>
@@ -186,9 +189,16 @@ struct sve_context {
* sve_context.vl must equal the thread's current vector length when
* doing a sigreturn.
*
+ * On systems with support for SME the SVE register state may reflect either
+ * streaming or non-streaming mode. In streaming mode the streaming mode
+ * vector length will be used and the flag SVE_SIG_FLAG_SM will be set in
+ * the flags field. It is permitted to enter or leave streaming mode in
+ * a signal return, applications should take care to ensure that any difference
+ * in vector length between the two modes is handled, including any resixing
+ * and movement of context blocks.
*
- * Note: for all these macros, the "vq" argument denotes the SVE
- * vector length in quadwords (i.e., units of 128 bits).
+ * Note: for all these macros, the "vq" argument denotes the vector length
+ * in quadwords (i.e., units of 128 bits).
*
* The correct way to obtain vq is to use sve_vq_from_vl(vl). The
* result is valid if and only if sve_vl_valid(vl) is true. This is
@@ -227,11 +227,17 @@ static int preserve_sve_context(struct sve_context __user *ctx)
{
int err = 0;
u16 reserved[ARRAY_SIZE(ctx->__reserved)];
+ u16 flags = 0;
unsigned int vl = task_get_sve_vl(current);
unsigned int vq = 0;
- if (test_thread_flag(TIF_SVE))
+ if (thread_sm_enabled(¤t->thread)) {
+ vl = task_get_sme_vl(current);
vq = sve_vq_from_vl(vl);
+ flags |= SVE_SIG_FLAG_SM;
+ } else if (test_thread_flag(TIF_SVE)) {
+ vq = sve_vq_from_vl(vl);
+ }
memset(reserved, 0, sizeof(reserved));
@@ -239,6 +245,7 @@ static int preserve_sve_context(struct sve_context __user *ctx)
__put_user_error(round_up(SVE_SIG_CONTEXT_SIZE(vq), 16),
&ctx->head.size, err);
__put_user_error(vl, &ctx->vl, err);
+ __put_user_error(flags, &ctx->flags, err);
BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
@@ -259,18 +266,28 @@ static int preserve_sve_context(struct sve_context __user *ctx)
static int restore_sve_fpsimd_context(struct user_ctxs *user)
{
int err;
- unsigned int vq;
+ unsigned int vl, vq;
struct user_fpsimd_state fpsimd;
struct sve_context sve;
if (__copy_from_user(&sve, user->sve, sizeof(sve)))
return -EFAULT;
- if (sve.vl != task_get_sve_vl(current))
+ if (sve.flags & SVE_SIG_FLAG_SM) {
+ if (!system_supports_sme())
+ return -EINVAL;
+
+ vl = task_get_sme_vl(current);
+ } else {
+ vl = task_get_sve_vl(current);
+ }
+
+ if (sve.vl != vl)
return -EINVAL;
if (sve.head.size <= sizeof(*user->sve)) {
clear_thread_flag(TIF_SVE);
+ current->thread.svcr &= ~SYS_SVCR_EL0_SM_MASK;
goto fpsimd_only;
}
@@ -302,7 +319,10 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
if (err)
return -EFAULT;
- set_thread_flag(TIF_SVE);
+ if (sve.flags & SVE_SIG_FLAG_SM)
+ current->thread.svcr |= SYS_SVCR_EL0_SM_MASK;
+ else
+ set_thread_flag(TIF_SVE);
fpsimd_only:
/* copy the FP and status/control registers */
@@ -394,7 +414,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
break;
case SVE_MAGIC:
- if (!system_supports_sve())
+ if (!system_supports_sve() && !system_supports_sme())
goto invalid;
if (user->sve)
@@ -593,11 +613,16 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
if (system_supports_sve()) {
unsigned int vq = 0;
- if (add_all || test_thread_flag(TIF_SVE)) {
- int vl = sve_max_vl();
+ if (add_all || test_thread_flag(TIF_SVE) ||
+ thread_sm_enabled(¤t->thread)) {
+ int vl = max(sve_max_vl(), sme_max_vl());
- if (!add_all)
- vl = task_get_sve_vl(current);
+ if (!add_all) {
+ if (thread_sm_enabled(¤t->thread))
+ vl = task_get_sme_vl(current);
+ else
+ vl = task_get_sve_vl(current);
+ }
vq = sve_vq_from_vl(vl);
}
@@ -648,8 +673,9 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
__put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
}
- /* Scalable Vector Extension state, if present */
- if (system_supports_sve() && err == 0 && user->sve_offset) {
+ /* Scalable Vector Extension state (including streaming), if present */
+ if ((system_supports_sve() || system_supports_sme()) &&
+ err == 0 && user->sve_offset) {
struct sve_context __user *sve_ctx =
apply_user_offset(user, user->sve_offset);
err |= preserve_sve_context(sve_ctx);
When in streaming mode we have the same set of SVE registers as we do in regular SVE mode with the exception of FFR and the use of the SME vector length. Provide signal handling for these registers by taking one of the reserved words in the SVE signal context as a flags field and defining a flag with a flag which is set for streaming mode. When the flag is set the vector length is set to the streaming mode vector length and we save and restore streaming mode data. We support entering or leaving streaming mode based on the value of the flag but do not support changing the vector length, this is not currently supported SVE signal handling. We could instead allocate a separate record in the signal frame for the streaming mode SVE context but this inflates the size of the maximal signal frame required and adds complication when validating signal frames from userspace, especially given the current structure of the code. Any implementation of support for streaming mode vectors in signals will have some potential for causing issues for applications that attempt to handle SVE vectors in signals, use streaming mode but do not understand streaming mode in their signal handling code, it is hard to identify a case that is clearly better than any other - they all have cases where they could cause unexpected register corruption or faults. Signed-off-by: Mark Brown <broonie@kernel.org> --- arch/arm64/include/uapi/asm/sigcontext.h | 16 ++++++-- arch/arm64/kernel/signal.c | 48 ++++++++++++++++++------ 2 files changed, 50 insertions(+), 14 deletions(-)