@@ -36,9 +36,6 @@
#define CACHE_LINE_SIZE_SHIFT 6
-#define LLCC_COMMON_HW_INFO 0x00030000
-
-#define LLCC_COMMON_STATUS0 0x0003000c
#define LLCC_LB_CNT_MASK GENMASK(31, 28)
#define LLCC_LB_CNT_SHIFT 28
@@ -106,6 +103,12 @@ struct qcom_llcc_config {
const struct llcc_slice_config *sct_data;
int size;
bool need_llcc_cfg;
+ const u32 *reg_offset;
+};
+
+enum llcc_reg_offset {
+ LLCC_COMMON_HW_INFO,
+ LLCC_COMMON_STATUS0,
};
static const struct llcc_slice_config sc7180_data[] = {
@@ -223,46 +226,63 @@ static const struct llcc_slice_config sm8350_data[] = {
{ LLCC_CPUHWT, 5, 512, 1, 1, 0xfff, 0x0, 0, 0, 0, 0, 0, 1 },
};
+static const u32 llcc_v1_2_reg_offset[] = {
+ [LLCC_COMMON_HW_INFO] = 0x00030000,
+ [LLCC_COMMON_STATUS0] = 0x0003000c,
+};
+
+static const u32 llcc_v21_reg_offset[] = {
+ [LLCC_COMMON_HW_INFO] = 0x00034000,
+ [LLCC_COMMON_STATUS0] = 0x0003400c,
+};
+
static const struct qcom_llcc_config sc7180_cfg = {
.sct_data = sc7180_data,
.size = ARRAY_SIZE(sc7180_data),
.need_llcc_cfg = true,
+ .reg_offset = llcc_v1_2_reg_offset,
};
static const struct qcom_llcc_config sc7280_cfg = {
.sct_data = sc7280_data,
.size = ARRAY_SIZE(sc7280_data),
.need_llcc_cfg = true,
+ .reg_offset = llcc_v1_2_reg_offset,
};
static const struct qcom_llcc_config sdm845_cfg = {
.sct_data = sdm845_data,
.size = ARRAY_SIZE(sdm845_data),
.need_llcc_cfg = false,
+ .reg_offset = llcc_v1_2_reg_offset,
};
static const struct qcom_llcc_config sm6350_cfg = {
.sct_data = sm6350_data,
.size = ARRAY_SIZE(sm6350_data),
.need_llcc_cfg = true,
+ .reg_offset = llcc_v1_2_reg_offset,
};
static const struct qcom_llcc_config sm8150_cfg = {
.sct_data = sm8150_data,
.size = ARRAY_SIZE(sm8150_data),
.need_llcc_cfg = true,
+ .reg_offset = llcc_v1_2_reg_offset,
};
static const struct qcom_llcc_config sm8250_cfg = {
.sct_data = sm8250_data,
.size = ARRAY_SIZE(sm8250_data),
.need_llcc_cfg = true,
+ .reg_offset = llcc_v1_2_reg_offset,
};
static const struct qcom_llcc_config sm8350_cfg = {
.sct_data = sm8350_data,
.size = ARRAY_SIZE(sm8350_data),
.need_llcc_cfg = true,
+ .reg_offset = llcc_v1_2_reg_offset,
};
static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
@@ -618,15 +638,18 @@ static int qcom_llcc_probe(struct platform_device *pdev)
goto err;
}
+ cfg = of_device_get_match_data(&pdev->dev);
+
/* Extract version of the IP */
- ret = regmap_read(drv_data->bcast_regmap, LLCC_COMMON_HW_INFO, &version);
+ ret = regmap_read(drv_data->bcast_regmap, cfg->reg_offset[LLCC_COMMON_HW_INFO],
+ &version);
if (ret)
goto err;
drv_data->version = version;
- ret = regmap_read(drv_data->regmap, LLCC_COMMON_STATUS0,
- &num_banks);
+ ret = regmap_read(drv_data->regmap, cfg->reg_offset[LLCC_COMMON_STATUS0],
+ &num_banks);
if (ret)
goto err;
@@ -634,7 +657,6 @@ static int qcom_llcc_probe(struct platform_device *pdev)
num_banks >>= LLCC_LB_CNT_SHIFT;
drv_data->num_banks = num_banks;
- cfg = of_device_get_match_data(&pdev->dev);
llcc_cfg = cfg->sct_data;
sz = cfg->size;
Newer LLCC HW have different register offsets for several registers, currently of which LLCC hardware info and status are used to identify the LLCC version information and other data. So use separate table to keep track of these register offsets which vary by different LLCC HW versions and eases any future addition in variations of register offsets for newer hardware. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> --- drivers/soc/qcom/llcc-qcom.c | 36 +++++++++++++++++++++++++++++------- 1 file changed, 29 insertions(+), 7 deletions(-)