diff mbox series

[v7,1/2] Bluetooth: btrtl: Add support for RTL8822C hci_ver 0x08

Message ID 20220126073905.3637841-2-adeep@lexina.in
State Superseded
Headers show
Series Bluetooth: hci_h5: btrtl: Add support for RTL8822CS hci_ver 0x08 | expand

Commit Message

Viacheslav Jan. 26, 2022, 7:39 a.m. UTC 
Add a variation of RTL8822CS with hci_ver = 0x08. This is fully similar
to RTL8822CS with hci_ver = 0x0a observed on the Tanix TX6 Android
set-top box and JetHome JetHub H1.

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
---
 drivers/bluetooth/btrtl.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index c2bdd1e6060e..c2030f7e25b4 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -148,6 +148,14 @@  static const struct id_table ic_id_table[] = {
 	  .fw_name  = "rtl_bt/rtl8761bu_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8761bu_config" },
 
+	/* 8822C with UART interface */
+	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0x8, HCI_UART),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8822cs_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8822cs_config" },
+
 	/* 8822C with UART interface */
 	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
 	  .config_needed = true,