diff mbox series

[v4,4/9] i2c: piix4: Move SMBus controller base address detect into function

Message ID 20220130184130.176646-5-terry.bowman@amd.com
State Superseded
Headers show
Series i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses | expand

Commit Message

Terry Bowman Jan. 30, 2022, 6:41 p.m. UTC 
Move SMBus controller base address detection into function. Refactor
is in preparation for following MMIO changes.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
---
 drivers/i2c/busses/i2c-piix4.c | 71 +++++++++++++++++++++-------------
 1 file changed, 45 insertions(+), 26 deletions(-)

Comments

Jean Delvare Feb. 8, 2022, 3:09 p.m. UTC | #1 
On Sun, 30 Jan 2022 12:41:25 -0600, Terry Bowman wrote:
>  static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
>  			     const struct pci_device_id *id, u8 aux)
>  {
> -	unsigned short piix4_smba;
> -	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
> +	u8 smb_en, smb_en_status, port_sel;
>  	u8 i2ccfg, i2ccfg_offset = 0x10;
> +	unsigned short piix4_smba;
>  	int retval;
>  
>  	/* SB800 and later SMBus does not support forcing address */

I suggest not moving variables around unless there's a compelling to do
that. Else you make your patches larger (and slightly harder to
review), plus it increases the risks of context conflicts when
backporting other changes.

Thanks,
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 5a98970ac60a..eab06e9e5fdf 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -282,12 +282,52 @@  static int piix4_setup(struct pci_dev *PIIX4_dev,
 	return piix4_smba;
 }
 
+static int piix4_setup_sb800_smba(struct pci_dev *PIIX4_dev,
+				  u8 smb_en,
+				  u8 aux,
+				  u8 *smb_en_status,
+				  unsigned short *piix4_smba)
+{
+	u8 smba_en_lo;
+	u8 smba_en_hi;
+	int retval;
+
+	retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+	if (retval)
+		return retval;
+
+	outb_p(smb_en, SB800_PIIX4_SMB_IDX);
+	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
+	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
+
+	piix4_sb800_region_release(&PIIX4_dev->dev);
+
+	if (!smb_en) {
+		*smb_en_status = smba_en_lo & 0x10;
+		*piix4_smba = smba_en_hi << 8;
+		if (aux)
+			*piix4_smba |= 0x20;
+	} else {
+		*smb_en_status = smba_en_lo & 0x01;
+		*piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+	}
+
+	if (!*smb_en_status) {
+		dev_err(&PIIX4_dev->dev,
+			"SMBus Host Controller not enabled!\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 			     const struct pci_device_id *id, u8 aux)
 {
-	unsigned short piix4_smba;
-	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
+	u8 smb_en, smb_en_status, port_sel;
 	u8 i2ccfg, i2ccfg_offset = 0x10;
+	unsigned short piix4_smba;
 	int retval;
 
 	/* SB800 and later SMBus does not support forcing address */
@@ -310,33 +350,12 @@  static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 	else
 		smb_en = (aux) ? 0x28 : 0x2c;
 
-	retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+	retval = piix4_setup_sb800_smba(PIIX4_dev, smb_en, aux, &smb_en_status,
+					&piix4_smba);
+
 	if (retval)
 		return retval;
 
-	outb_p(smb_en, SB800_PIIX4_SMB_IDX);
-	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
-	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
-	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
-
-	piix4_sb800_region_release(&PIIX4_dev->dev);
-
-	if (!smb_en) {
-		smb_en_status = smba_en_lo & 0x10;
-		piix4_smba = smba_en_hi << 8;
-		if (aux)
-			piix4_smba |= 0x20;
-	} else {
-		smb_en_status = smba_en_lo & 0x01;
-		piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
-	}
-
-	if (!smb_en_status) {
-		dev_err(&PIIX4_dev->dev,
-			"SMBus Host Controller not enabled!\n");
-		return -ENODEV;
-	}
-
 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
 		return -ENODEV;