diff mbox

[11/14] ARM: dts: ifc6410: Add pwrseq support for WLAN

Message ID 1442579519-20398-1-git-send-email-srinivas.kandagatla@linaro.org
State Accepted
Commit 03f00be5babcf0ac6747beedbe5fa73a3abd3cdb
Headers show

Commit Message

Srinivas Kandagatla Sept. 18, 2015, 12:31 p.m. UTC
This patch adds pwrseq for WLAN which resets the WLAN just before the
SDIO bus is up.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index c1d5bd7..9c71a51 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -1,5 +1,6 @@ 
 #include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "Qualcomm APQ8064/IFC6410";
@@ -14,6 +15,17 @@ 
 		stdout-path = "serial0:115200n8";
 	};
 
+	pwrseq {
+		compatible = "simple-bus";
+
+		sdcc4_pwrseq: sdcc4_pwrseq {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_default_gpios>;
+			compatible = "mmc-pwrseq-simple";
+			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	soc {
 		pinctrl@800000 {
 			card_detect: card_detect {
@@ -207,6 +219,21 @@ 
 			status = "okay";
 		};
 
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					wlan_default_gpios: wlan-gpios {
+						pios {
+							pins = "gpio43";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+				};
+			};
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
@@ -228,6 +255,7 @@ 
 				status = "okay";
 				vmmc-supply = <&ext_3p3v>;
 				vqmmc-supply = <&pm8921_lvs1>;
+				mmc-pwrseq = <&sdcc4_pwrseq>;
 			};
 		};
 	};