@@ -553,9 +553,9 @@ static int m88e1121_config_aneg_rgmii_delays(struct phy_device *phydev)
else
mscr = 0;
- return phy_modify_paged(phydev, MII_MARVELL_MSCR_PAGE,
- MII_88E1121_PHY_MSCR_REG,
- MII_88E1121_PHY_MSCR_DELAY_MASK, mscr);
+ return phy_modify_paged_changed(phydev, MII_MARVELL_MSCR_PAGE,
+ MII_88E1121_PHY_MSCR_REG,
+ MII_88E1121_PHY_MSCR_DELAY_MASK, mscr);
}
static int m88e1121_config_aneg(struct phy_device *phydev)
@@ -569,11 +569,13 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
return err;
}
+ changed = err;
+
err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
if (err < 0)
return err;
- changed = err;
+ changed |= err;
err = genphy_config_aneg(phydev);
if (err < 0)
@@ -1211,17 +1213,22 @@ static int m88e1510_config_init(struct phy_device *phydev)
static int m88e1118_config_aneg(struct phy_device *phydev)
{
+ int changed = 0;
int err;
- err = genphy_soft_reset(phydev);
+ err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
if (err < 0)
return err;
- err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
+ changed = err;
+
+ err = genphy_config_aneg(phydev);
if (err < 0)
return err;
- err = genphy_config_aneg(phydev);
+ if (phydev->autoneg != AUTONEG_ENABLE || changed)
+ return genphy_soft_reset(phydev);
+
return 0;
}
It is mandatory for a software to issue a reset upon modifying RGMII Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC Specific Control register 2 (page 2, register 21) otherwise the changes won't be perceived by the PHY (the same is applicable for a lot of other registers). Not setting the RGMII delays on the platforms that imply it' being done on the PHY side will consequently cause the traffic loss. We discovered that the denoted soft-reset is missing in the m88e1121_config_aneg() method for the case if the RGMII delays are modified but the MDIx polarity isn't changed or the auto-negotiation is left enabled, thus causing the traffic loss on our platform with Marvell Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the delays have been actually set in the m88e1121_config_aneg_rgmii_delays() method. Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset") Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: stable@vger.kernel.org --- Link: https://lore.kernel.org/netdev/96759fee7240fd095cb9cc1f6eaf2d9113b57cf0.camel@baikalelectronics.ru/ Changelog v2: - Add "net" suffix into the PATCH-clause of the subject. - Cc the patch to the stable tree list. - Rebase onto the latset netdev/net branch with the top commit --- drivers/net/phy/marvell.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)