diff mbox series

[1/3] mmc-utils: manpage: Document -c option for partitioning commands

Message ID 20220205205647.7677-1-marius@FreeBSD.org
State New
Headers show
Series [1/3] mmc-utils: manpage: Document -c option for partitioning commands | expand

Commit Message

Marius Strobl Feb. 5, 2022, 8:56 p.m. UTC
The 'continue' option was added in commit 752072dafe9c ("Add -c option
for partitioning commands).

Signed-off-by: Marius Strobl <marius@FreeBSD.org>
---
 man/mmc.1 | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

Comments

Ulf Hansson Feb. 8, 2022, 3:18 p.m. UTC | #1
On Sat, 5 Feb 2022 at 21:57, Marius Strobl <marius@freebsd.org> wrote:
>
> The 'continue' option was added in commit 752072dafe9c ("Add -c option
> for partitioning commands).
>
> Signed-off-by: Marius Strobl <marius@FreeBSD.org>

The three patches applied to
git.kernel.org/pub/scm//utils/mmc/mmc-utils.git master, thanks!

Kind regards
Uffe

> ---
>  man/mmc.1 | 15 +++++++++------
>  1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/man/mmc.1 b/man/mmc.1
> index bdb6f09..bccabf3 100644
> --- a/man/mmc.1
> +++ b/man/mmc.1
> @@ -30,21 +30,24 @@ This sets the eMMC to be write-protected until next boot.
>  Set the eMMC data sector size to 4KB by disabling emulation on
>  <device>.
>  .TP
> -.BR "gp create <-y|-n> <length KiB> <partition> <enh_attr> <ext_attr> <device>"
> +.BR "gp create <-y|-n|-c> <length KiB> <partition> <enh_attr> <ext_attr> <device>"
>  create general purpose partition for the <device>.
> -Dry-run only unless -y is passed.
> +Dry-run only unless -y or -c is passed.
> +Use -c if more partitioning settings are still to come.
>  To set enhanced attribute to general partition being created set <enh_attr> to 1 else set it to 0.
>  To set extended attribute to general partition set <ext_attr> to 1,2 else set it to 0.
>  NOTE!  This is a one-time programmable (unreversible) change.
>  .TP
> -.BR "enh_area set <-y|-n> <start KiB> <length KiB> <device>"
> +.BR "enh_area set <-y|-n|-c> <start KiB> <length KiB> <device>"
>  Enable the enhanced user area for the <device>.
> -Dry-run only unless -y is passed.
> +Dry-run only unless -y or -c is passed.
> +Use -c if more partitioning settings are still to come.
>  NOTE!  This is a one-time programmable (unreversible) change.
>  .TP
> -.BR "write_reliability set <-y|-n> <partition> <device>"
> +.BR "write_reliability set <-y|-n|-c> <partition> <device>"
>  Enable write reliability per partition for the <device>.
> -Dry-run only unless -y is passed.
> +Dry-run only unless -y or -c is passed.
> +Use -c if more partitioning settings are still to come.
>  NOTE!  This is a one-time programmable (unreversible) change.
>  .TP
>  .BR "status get <device>"
> --
> 2.31.1
>
diff mbox series

Patch

diff --git a/man/mmc.1 b/man/mmc.1
index bdb6f09..bccabf3 100644
--- a/man/mmc.1
+++ b/man/mmc.1
@@ -30,21 +30,24 @@  This sets the eMMC to be write-protected until next boot.
 Set the eMMC data sector size to 4KB by disabling emulation on
 <device>.
 .TP
-.BR "gp create <-y|-n> <length KiB> <partition> <enh_attr> <ext_attr> <device>"
+.BR "gp create <-y|-n|-c> <length KiB> <partition> <enh_attr> <ext_attr> <device>"
 create general purpose partition for the <device>.
-Dry-run only unless -y is passed.
+Dry-run only unless -y or -c is passed.
+Use -c if more partitioning settings are still to come.
 To set enhanced attribute to general partition being created set <enh_attr> to 1 else set it to 0.
 To set extended attribute to general partition set <ext_attr> to 1,2 else set it to 0.
 NOTE!  This is a one-time programmable (unreversible) change.
 .TP
-.BR "enh_area set <-y|-n> <start KiB> <length KiB> <device>"
+.BR "enh_area set <-y|-n|-c> <start KiB> <length KiB> <device>"
 Enable the enhanced user area for the <device>.
-Dry-run only unless -y is passed.
+Dry-run only unless -y or -c is passed.
+Use -c if more partitioning settings are still to come.
 NOTE!  This is a one-time programmable (unreversible) change.
 .TP
-.BR "write_reliability set <-y|-n> <partition> <device>"
+.BR "write_reliability set <-y|-n|-c> <partition> <device>"
 Enable write reliability per partition for the <device>.
-Dry-run only unless -y is passed.
+Dry-run only unless -y or -c is passed.
+Use -c if more partitioning settings are still to come.
 NOTE!  This is a one-time programmable (unreversible) change.
 .TP
 .BR "status get <device>"