diff mbox series

usb: dwc3: Don't switch OTG -> peripheral if extcon is present

Message ID 20220206014532.372109-1-andrew.smirnov@gmail.com
State Superseded
Headers show
Series usb: dwc3: Don't switch OTG -> peripheral if extcon is present | expand

Commit Message

Andrey Smirnov Feb. 6, 2022, 1:45 a.m. UTC
It is necessary that:

   ROLE_SWITCH && device_property_read_bool(dwc->dev, "usb-role-switch")

is true in order for dwc3_get_dr_mode() to _not_ force us from OTG to
PERIPHERAL mode here:

   if (mode == USB_DR_MODE_OTG &&
       (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
        !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
	!DWC3_VER_IS_PRIOR(DWC3, 330A))
	mode = USB_DR_MODE_PERIPHERAL;

and dwc3_drd_init() to be called later in dwc3_core_init_mode(). To
avoid always ignoring extcon device returned by dwc3_get_extcon()
modify the above check to also account for dwc->edev.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---

Previous discussion:

https://lore.kernel.org/linux-usb/20220131192102.4115473-1-andrew.smirnov@gmail.com/

 drivers/usb/dwc3/core.c | 55 ++++++++++++++++++++++++++++++++++++++++-
 drivers/usb/dwc3/drd.c  | 50 -------------------------------------
 2 files changed, 54 insertions(+), 51 deletions(-)

--
2.25.1

Comments

Thinh Nguyen Feb. 8, 2022, 7:54 p.m. UTC | #1
Andrey Smirnov wrote:
> It is necessary that:
> 
>    ROLE_SWITCH && device_property_read_bool(dwc->dev, "usb-role-switch")
> 
> is true in order for dwc3_get_dr_mode() to _not_ force us from OTG to
> PERIPHERAL mode here:
> 
>    if (mode == USB_DR_MODE_OTG &&
>        (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
>         !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
> 	!DWC3_VER_IS_PRIOR(DWC3, 330A))
> 	mode = USB_DR_MODE_PERIPHERAL;
> 
> and dwc3_drd_init() to be called later in dwc3_core_init_mode(). To
> avoid always ignoring extcon device returned by dwc3_get_extcon()
> modify the above check to also account for dwc->edev.
> 

I think the commit message is a bit difficult to follow. Can we rephrase
it to something like this:

If the extcon device exists, get the mode from the extcon device. If the
controller is DRD and the driver is unable to determine the mode, only
then default the dr_mode to USB_DR_MODE_PERIPHERAL.


> Cc: Felipe Balbi <balbi@kernel.org>
> Cc: Thinh Nguyen <thinhn@synopsys.com>
> Cc: linux-usb@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> 
> Previous discussion:
> 
> https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/20220131192102.4115473-1-andrew.smirnov@gmail.com/__;!!A4F2R9G_pg!OlXelv3-qdUChbfoT9-Qttv4PH8DDro1dSzIj6xEN7x3Vkv8jeh8unvO4RvolUA$ 
> 
>  drivers/usb/dwc3/core.c | 55 ++++++++++++++++++++++++++++++++++++++++-
>  drivers/usb/dwc3/drd.c  | 50 -------------------------------------
>  2 files changed, 54 insertions(+), 51 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index f2448d0a9d39..0ae152e47a00 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -23,6 +23,7 @@
>  #include <linux/delay.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/of.h>
> +#include <linux/of_graph.h>
>  #include <linux/acpi.h>
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/reset.h>
> @@ -84,7 +85,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
>  		 * mode. If the controller supports DRD but the dr_mode is not
>  		 * specified or set to OTG, then set the mode to peripheral.
>  		 */
> -		if (mode == USB_DR_MODE_OTG &&
> +		if (mode == USB_DR_MODE_OTG && !dwc->edev &&
>  		    (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
>  		     !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
>  		    !DWC3_VER_IS_PRIOR(DWC3, 330A))
> @@ -1462,6 +1463,51 @@ static void dwc3_check_params(struct dwc3 *dwc)
>  	}
>  }
> 
> +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
> +{
> +	struct device *dev = dwc->dev;
> +	struct device_node *np_phy;
> +	struct extcon_dev *edev = NULL;
> +	const char *name;
> +
> +	if (device_property_read_bool(dev, "extcon"))
> +		return extcon_get_edev_by_phandle(dev, 0);
> +
> +	/*
> +	 * Device tree platforms should get extcon via phandle.
> +	 * On ACPI platforms, we get the name from a device property.
> +	 * This device property is for kernel internal use only and
> +	 * is expected to be set by the glue code.
> +	 */
> +	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
> +		edev = extcon_get_extcon_dev(name);
> +		if (!edev)
> +			return ERR_PTR(-EPROBE_DEFER);
> +
> +		return edev;
> +	}
> +
> +	/*
> +	 * Try to get an extcon device from the USB PHY controller's "port"
> +	 * node. Check if it has the "port" node first, to avoid printing the
> +	 * error message from underlying code, as it's a valid case: extcon
> +	 * device (and "port" node) may be missing in case of "usb-role-switch"
> +	 * or OTG mode.
> +	 */
> +	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
> +	if (of_graph_is_present(np_phy)) {
> +		struct device_node *np_conn;
> +
> +		np_conn = of_graph_get_remote_node(np_phy, -1, -1);
> +		if (np_conn)
> +			edev = extcon_find_edev_by_node(np_conn);
> +		of_node_put(np_conn);
> +	}
> +	of_node_put(np_phy);
> +
> +	return edev;
> +}
> +
>  static int dwc3_probe(struct platform_device *pdev)
>  {
>  	struct device		*dev = &pdev->dev;
> @@ -1561,6 +1607,13 @@ static int dwc3_probe(struct platform_device *pdev)
>  		goto err2;
>  	}
> 
> +	dwc->edev = dwc3_get_extcon(dwc);
> +	if (IS_ERR(dwc->edev)) {
> +		ret = PTR_ERR(dwc->edev);
> +		dev_err_probe(dwc->dev, ret, "failed to get extcon");

add "\n" ?

> +		goto err3;
> +	}
> +
>  	ret = dwc3_get_dr_mode(dwc);
>  	if (ret)
>  		goto err3;
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index e2b68bb770d1..9a414edc439a 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -8,7 +8,6 @@
>   */
> 
>  #include <linux/extcon.h>
> -#include <linux/of_graph.h>
>  #include <linux/platform_device.h>
>  #include <linux/property.h>
> 
> @@ -438,51 +437,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
>  	return NOTIFY_DONE;
>  }
> 
> -static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
> -{
> -	struct device *dev = dwc->dev;
> -	struct device_node *np_phy;
> -	struct extcon_dev *edev = NULL;
> -	const char *name;
> -
> -	if (device_property_read_bool(dev, "extcon"))
> -		return extcon_get_edev_by_phandle(dev, 0);
> -
> -	/*
> -	 * Device tree platforms should get extcon via phandle.
> -	 * On ACPI platforms, we get the name from a device property.
> -	 * This device property is for kernel internal use only and
> -	 * is expected to be set by the glue code.
> -	 */
> -	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
> -		edev = extcon_get_extcon_dev(name);
> -		if (!edev)
> -			return ERR_PTR(-EPROBE_DEFER);
> -
> -		return edev;
> -	}
> -
> -	/*
> -	 * Try to get an extcon device from the USB PHY controller's "port"
> -	 * node. Check if it has the "port" node first, to avoid printing the
> -	 * error message from underlying code, as it's a valid case: extcon
> -	 * device (and "port" node) may be missing in case of "usb-role-switch"
> -	 * or OTG mode.
> -	 */
> -	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
> -	if (of_graph_is_present(np_phy)) {
> -		struct device_node *np_conn;
> -
> -		np_conn = of_graph_get_remote_node(np_phy, -1, -1);
> -		if (np_conn)
> -			edev = extcon_find_edev_by_node(np_conn);
> -		of_node_put(np_conn);
> -	}
> -	of_node_put(np_phy);
> -
> -	return edev;
> -}
> -
>  #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
>  #define ROLE_SWITCH 1
>  static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
> @@ -575,10 +529,6 @@ int dwc3_drd_init(struct dwc3 *dwc)
>  {
>  	int ret, irq;
> 
> -	dwc->edev = dwc3_get_extcon(dwc);
> -	if (IS_ERR(dwc->edev))
> -		return PTR_ERR(dwc->edev);
> -
>  	if (ROLE_SWITCH &&
>  	    device_property_read_bool(dwc->dev, "usb-role-switch")) {
>  		ret = dwc3_setup_role_switch(dwc);
> --
> 2.25.1

Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

Thanks,
Thinh
Andrey Smirnov Feb. 12, 2022, 10:22 p.m. UTC | #2
On Tue, Feb 8, 2022 at 11:54 AM Thinh Nguyen <Thinh.Nguyen@synopsys.com> wrote:
>
> Andrey Smirnov wrote:
> > It is necessary that:
> >
> >    ROLE_SWITCH && device_property_read_bool(dwc->dev, "usb-role-switch")
> >
> > is true in order for dwc3_get_dr_mode() to _not_ force us from OTG to
> > PERIPHERAL mode here:
> >
> >    if (mode == USB_DR_MODE_OTG &&
> >        (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
> >         !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
> >       !DWC3_VER_IS_PRIOR(DWC3, 330A))
> >       mode = USB_DR_MODE_PERIPHERAL;
> >
> > and dwc3_drd_init() to be called later in dwc3_core_init_mode(). To
> > avoid always ignoring extcon device returned by dwc3_get_extcon()
> > modify the above check to also account for dwc->edev.
> >
>
> I think the commit message is a bit difficult to follow. Can we rephrase
> it to something like this:
>
> If the extcon device exists, get the mode from the extcon device. If the
> controller is DRD and the driver is unable to determine the mode, only
> then default the dr_mode to USB_DR_MODE_PERIPHERAL.
>

Sure, will do.

>
> > Cc: Felipe Balbi <balbi@kernel.org>
> > Cc: Thinh Nguyen <thinhn@synopsys.com>
> > Cc: linux-usb@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > ---
> >
> > Previous discussion:
> >
> > https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/20220131192102.4115473-1-andrew.smirnov@gmail.com/__;!!A4F2R9G_pg!OlXelv3-qdUChbfoT9-Qttv4PH8DDro1dSzIj6xEN7x3Vkv8jeh8unvO4RvolUA$
> >
> >  drivers/usb/dwc3/core.c | 55 ++++++++++++++++++++++++++++++++++++++++-
> >  drivers/usb/dwc3/drd.c  | 50 -------------------------------------
> >  2 files changed, 54 insertions(+), 51 deletions(-)
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index f2448d0a9d39..0ae152e47a00 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -23,6 +23,7 @@
> >  #include <linux/delay.h>
> >  #include <linux/dma-mapping.h>
> >  #include <linux/of.h>
> > +#include <linux/of_graph.h>
> >  #include <linux/acpi.h>
> >  #include <linux/pinctrl/consumer.h>
> >  #include <linux/reset.h>
> > @@ -84,7 +85,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
> >                * mode. If the controller supports DRD but the dr_mode is not
> >                * specified or set to OTG, then set the mode to peripheral.
> >                */
> > -             if (mode == USB_DR_MODE_OTG &&
> > +             if (mode == USB_DR_MODE_OTG && !dwc->edev &&
> >                   (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
> >                    !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
> >                   !DWC3_VER_IS_PRIOR(DWC3, 330A))
> > @@ -1462,6 +1463,51 @@ static void dwc3_check_params(struct dwc3 *dwc)
> >       }
> >  }
> >
> > +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
> > +{
> > +     struct device *dev = dwc->dev;
> > +     struct device_node *np_phy;
> > +     struct extcon_dev *edev = NULL;
> > +     const char *name;
> > +
> > +     if (device_property_read_bool(dev, "extcon"))
> > +             return extcon_get_edev_by_phandle(dev, 0);
> > +
> > +     /*
> > +      * Device tree platforms should get extcon via phandle.
> > +      * On ACPI platforms, we get the name from a device property.
> > +      * This device property is for kernel internal use only and
> > +      * is expected to be set by the glue code.
> > +      */
> > +     if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
> > +             edev = extcon_get_extcon_dev(name);
> > +             if (!edev)
> > +                     return ERR_PTR(-EPROBE_DEFER);
> > +
> > +             return edev;
> > +     }
> > +
> > +     /*
> > +      * Try to get an extcon device from the USB PHY controller's "port"
> > +      * node. Check if it has the "port" node first, to avoid printing the
> > +      * error message from underlying code, as it's a valid case: extcon
> > +      * device (and "port" node) may be missing in case of "usb-role-switch"
> > +      * or OTG mode.
> > +      */
> > +     np_phy = of_parse_phandle(dev->of_node, "phys", 0);
> > +     if (of_graph_is_present(np_phy)) {
> > +             struct device_node *np_conn;
> > +
> > +             np_conn = of_graph_get_remote_node(np_phy, -1, -1);
> > +             if (np_conn)
> > +                     edev = extcon_find_edev_by_node(np_conn);
> > +             of_node_put(np_conn);
> > +     }
> > +     of_node_put(np_phy);
> > +
> > +     return edev;
> > +}
> > +
> >  static int dwc3_probe(struct platform_device *pdev)
> >  {
> >       struct device           *dev = &pdev->dev;
> > @@ -1561,6 +1607,13 @@ static int dwc3_probe(struct platform_device *pdev)
> >               goto err2;
> >       }
> >
> > +     dwc->edev = dwc3_get_extcon(dwc);
> > +     if (IS_ERR(dwc->edev)) {
> > +             ret = PTR_ERR(dwc->edev);
> > +             dev_err_probe(dwc->dev, ret, "failed to get extcon");
>
> add "\n" ?

Sure, will do.

>
> > +             goto err3;
> > +     }
> > +
> >       ret = dwc3_get_dr_mode(dwc);
> >       if (ret)
> >               goto err3;
> > diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> > index e2b68bb770d1..9a414edc439a 100644
> > --- a/drivers/usb/dwc3/drd.c
> > +++ b/drivers/usb/dwc3/drd.c
> > @@ -8,7 +8,6 @@
> >   */
> >
> >  #include <linux/extcon.h>
> > -#include <linux/of_graph.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/property.h>
> >
> > @@ -438,51 +437,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
> >       return NOTIFY_DONE;
> >  }
> >
> > -static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
> > -{
> > -     struct device *dev = dwc->dev;
> > -     struct device_node *np_phy;
> > -     struct extcon_dev *edev = NULL;
> > -     const char *name;
> > -
> > -     if (device_property_read_bool(dev, "extcon"))
> > -             return extcon_get_edev_by_phandle(dev, 0);
> > -
> > -     /*
> > -      * Device tree platforms should get extcon via phandle.
> > -      * On ACPI platforms, we get the name from a device property.
> > -      * This device property is for kernel internal use only and
> > -      * is expected to be set by the glue code.
> > -      */
> > -     if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
> > -             edev = extcon_get_extcon_dev(name);
> > -             if (!edev)
> > -                     return ERR_PTR(-EPROBE_DEFER);
> > -
> > -             return edev;
> > -     }
> > -
> > -     /*
> > -      * Try to get an extcon device from the USB PHY controller's "port"
> > -      * node. Check if it has the "port" node first, to avoid printing the
> > -      * error message from underlying code, as it's a valid case: extcon
> > -      * device (and "port" node) may be missing in case of "usb-role-switch"
> > -      * or OTG mode.
> > -      */
> > -     np_phy = of_parse_phandle(dev->of_node, "phys", 0);
> > -     if (of_graph_is_present(np_phy)) {
> > -             struct device_node *np_conn;
> > -
> > -             np_conn = of_graph_get_remote_node(np_phy, -1, -1);
> > -             if (np_conn)
> > -                     edev = extcon_find_edev_by_node(np_conn);
> > -             of_node_put(np_conn);
> > -     }
> > -     of_node_put(np_phy);
> > -
> > -     return edev;
> > -}
> > -
> >  #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
> >  #define ROLE_SWITCH 1
> >  static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
> > @@ -575,10 +529,6 @@ int dwc3_drd_init(struct dwc3 *dwc)
> >  {
> >       int ret, irq;
> >
> > -     dwc->edev = dwc3_get_extcon(dwc);
> > -     if (IS_ERR(dwc->edev))
> > -             return PTR_ERR(dwc->edev);
> > -
> >       if (ROLE_SWITCH &&
> >           device_property_read_bool(dwc->dev, "usb-role-switch")) {
> >               ret = dwc3_setup_role_switch(dwc);
> > --
> > 2.25.1
>
> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
>
> Thanks,
> Thinh
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f2448d0a9d39..0ae152e47a00 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -23,6 +23,7 @@ 
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/acpi.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/reset.h>
@@ -84,7 +85,7 @@  static int dwc3_get_dr_mode(struct dwc3 *dwc)
 		 * mode. If the controller supports DRD but the dr_mode is not
 		 * specified or set to OTG, then set the mode to peripheral.
 		 */
-		if (mode == USB_DR_MODE_OTG &&
+		if (mode == USB_DR_MODE_OTG && !dwc->edev &&
 		    (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
 		     !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
 		    !DWC3_VER_IS_PRIOR(DWC3, 330A))
@@ -1462,6 +1463,51 @@  static void dwc3_check_params(struct dwc3 *dwc)
 	}
 }

+static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
+{
+	struct device *dev = dwc->dev;
+	struct device_node *np_phy;
+	struct extcon_dev *edev = NULL;
+	const char *name;
+
+	if (device_property_read_bool(dev, "extcon"))
+		return extcon_get_edev_by_phandle(dev, 0);
+
+	/*
+	 * Device tree platforms should get extcon via phandle.
+	 * On ACPI platforms, we get the name from a device property.
+	 * This device property is for kernel internal use only and
+	 * is expected to be set by the glue code.
+	 */
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
+		edev = extcon_get_extcon_dev(name);
+		if (!edev)
+			return ERR_PTR(-EPROBE_DEFER);
+
+		return edev;
+	}
+
+	/*
+	 * Try to get an extcon device from the USB PHY controller's "port"
+	 * node. Check if it has the "port" node first, to avoid printing the
+	 * error message from underlying code, as it's a valid case: extcon
+	 * device (and "port" node) may be missing in case of "usb-role-switch"
+	 * or OTG mode.
+	 */
+	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
+	if (of_graph_is_present(np_phy)) {
+		struct device_node *np_conn;
+
+		np_conn = of_graph_get_remote_node(np_phy, -1, -1);
+		if (np_conn)
+			edev = extcon_find_edev_by_node(np_conn);
+		of_node_put(np_conn);
+	}
+	of_node_put(np_phy);
+
+	return edev;
+}
+
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
@@ -1561,6 +1607,13 @@  static int dwc3_probe(struct platform_device *pdev)
 		goto err2;
 	}

+	dwc->edev = dwc3_get_extcon(dwc);
+	if (IS_ERR(dwc->edev)) {
+		ret = PTR_ERR(dwc->edev);
+		dev_err_probe(dwc->dev, ret, "failed to get extcon");
+		goto err3;
+	}
+
 	ret = dwc3_get_dr_mode(dwc);
 	if (ret)
 		goto err3;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index e2b68bb770d1..9a414edc439a 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -8,7 +8,6 @@ 
  */

 #include <linux/extcon.h>
-#include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>

@@ -438,51 +437,6 @@  static int dwc3_drd_notifier(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }

-static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
-{
-	struct device *dev = dwc->dev;
-	struct device_node *np_phy;
-	struct extcon_dev *edev = NULL;
-	const char *name;
-
-	if (device_property_read_bool(dev, "extcon"))
-		return extcon_get_edev_by_phandle(dev, 0);
-
-	/*
-	 * Device tree platforms should get extcon via phandle.
-	 * On ACPI platforms, we get the name from a device property.
-	 * This device property is for kernel internal use only and
-	 * is expected to be set by the glue code.
-	 */
-	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
-		edev = extcon_get_extcon_dev(name);
-		if (!edev)
-			return ERR_PTR(-EPROBE_DEFER);
-
-		return edev;
-	}
-
-	/*
-	 * Try to get an extcon device from the USB PHY controller's "port"
-	 * node. Check if it has the "port" node first, to avoid printing the
-	 * error message from underlying code, as it's a valid case: extcon
-	 * device (and "port" node) may be missing in case of "usb-role-switch"
-	 * or OTG mode.
-	 */
-	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
-	if (of_graph_is_present(np_phy)) {
-		struct device_node *np_conn;
-
-		np_conn = of_graph_get_remote_node(np_phy, -1, -1);
-		if (np_conn)
-			edev = extcon_find_edev_by_node(np_conn);
-		of_node_put(np_conn);
-	}
-	of_node_put(np_phy);
-
-	return edev;
-}
-
 #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
 #define ROLE_SWITCH 1
 static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
@@ -575,10 +529,6 @@  int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;

-	dwc->edev = dwc3_get_extcon(dwc);
-	if (IS_ERR(dwc->edev))
-		return PTR_ERR(dwc->edev);
-
 	if (ROLE_SWITCH &&
 	    device_property_read_bool(dwc->dev, "usb-role-switch")) {
 		ret = dwc3_setup_role_switch(dwc);