diff mbox series

[v2,05/20] sata: call device_probe() after scanning

Message ID 20220210081124.86612-6-takahiro.akashi@linaro.org
State Superseded
Headers show
Series efi_loader: more tightly integrate UEFI disks to driver model | expand

Commit Message

AKASHI Takahiro Feb. 10, 2022, 8:11 a.m. UTC
Every time a sata bus/port is scanned and a new device is detected,
we want to call device_probe() as it will give us a chance to run
additional post-processings for some purposes.

In particular, support for creating partitions on a device will be added.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 drivers/ata/dwc_ahsata.c |  5 +++++
 drivers/ata/fsl_sata.c   | 11 +++++++++++
 drivers/ata/sata_mv.c    |  5 +++++
 drivers/ata/sata_sil.c   | 12 ++++++++++++
 4 files changed, 33 insertions(+)
diff mbox series

Patch

diff --git a/drivers/ata/dwc_ahsata.c b/drivers/ata/dwc_ahsata.c
index 6d42548087b3..d9fd850c6fae 100644
--- a/drivers/ata/dwc_ahsata.c
+++ b/drivers/ata/dwc_ahsata.c
@@ -1026,6 +1026,11 @@  int dwc_ahsata_scan(struct udevice *dev)
 		return ret;
 	}
 
+	ret = blk_probe_or_unbind(dev);
+	if (ret < 0)
+		/* TODO: undo create */
+		return ret;
+
 	return 0;
 }
 
diff --git a/drivers/ata/fsl_sata.c b/drivers/ata/fsl_sata.c
index e44db0a37458..7b2d62d7581b 100644
--- a/drivers/ata/fsl_sata.c
+++ b/drivers/ata/fsl_sata.c
@@ -982,6 +982,17 @@  static int fsl_ata_probe(struct udevice *dev)
 			failed_number++;
 			continue;
 		}
+
+		ret = device_probe(dev);
+		if (ret < 0) {
+			debug("Probing $s failed (%d)\n", dev->name, ret);
+			ret = fsl_unbind_device(blk);
+			if (ret)
+				return ret;
+
+			failed_number++;
+			continue;
+		}
 	}
 
 	if (failed_number == nr_ports)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 003222d47be6..a187796dfcdf 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1099,6 +1099,11 @@  static int sata_mv_probe(struct udevice *dev)
 			continue;
 		}
 
+		ret = blk_probe_or_unbind(dev);
+		if (ret < 0)
+			/* TODO: undo create */
+			continue;
+
 		/* If we got here, the current SATA port was probed
 		 * successfully, so set the probe status to successful.
 		 */
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index dda712f42cb2..cffeb01561b1 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -864,6 +864,18 @@  static int sil_pci_probe(struct udevice *dev)
 			failed_number++;
 			continue;
 		}
+
+		ret = device_probe(dev);
+		if (ret < 0) {
+			debug("Probing %s failed (%d)\n", dev, ret);
+			ret = sil_unbind_device(blk);
+			device_unbind(dev);
+			if (ret)
+				return ret;
+
+			failed_number++;
+			continue;
+		}
 	}
 
 	if (failed_number == sata_info.maxport)