diff mbox

[v2,02/11] ARM: STi: DT: STiH407: Add i2c3 alternate pin configs

Message ID 1443443867-4099-3-git-send-email-peter.griffin@linaro.org
State Accepted
Commit 38fc7859867492f3ee00583acd70ebceff27d1fd
Headers show

Commit Message

Peter Griffin Sept. 28, 2015, 12:37 p.m. UTC 
i2c3 controller can use several sets of pins depending
on board design. This patch adds the missing alternate
pinconfigs.

Signed-off-by: Seraphin Bonnaffe <seraphin.bonnaffe@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
---
 arch/arm/boot/dts/stih407-pinctrl.dtsi | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 30db453..135920e 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -430,12 +430,24 @@ 
 			};
 
 			i2c3 {
-				pinctrl_i2c3_default: i2c3-default {
+				pinctrl_i2c3_default: i2c3-alt1-0 {
 					st,pins {
 						sda = <&pio18 6 ALT1 BIDIR>;
 						scl = <&pio18 5 ALT1 BIDIR>;
 					};
 				};
+				pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+					st,pins {
+						sda = <&pio17 7 ALT1 BIDIR>;
+						scl = <&pio17 6 ALT1 BIDIR>;
+					};
+				};
+				pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+					st,pins {
+						sda = <&pio13 6 ALT3 BIDIR>;
+						scl = <&pio13 5 ALT3 BIDIR>;
+					};
+				};
 			};
 
 			spi0 {