@@ -563,6 +563,10 @@ config TARGET_VEXPRESS64_BASE_FVP
select ARM64
select SEMIHOSTING
+config TARGET_VEXPRESS64_BASE_FVP_DRAM
+ bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
+ select ARM64
+
config TARGET_VEXPRESS64_JUNO
bool "Support Versatile Express Juno Development Platform"
select ARM64
new file mode 100644
@@ -0,0 +1,19 @@
+CONFIG_ARM=y
+CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="vexpress64"
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+# CONFIG_CMD_MISC is not set
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_PROMPT="VExpress64# "
@@ -30,7 +30,8 @@
#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"
/* Link Definitions */
-#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
+#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
+ defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
/* ATF loads u-boot here for BASE_FVP model */
#define CONFIG_SYS_TEXT_BASE 0x88000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
@@ -103,7 +104,8 @@
#define GICR_BASE (0x2f100000)
#else
-#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
+#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
+ defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
#define GICD_BASE (0x2f000000)
#define GICC_BASE (0x2c000000)
#elif CONFIG_TARGET_VEXPRESS64_JUNO
@@ -233,6 +235,25 @@
#define CONFIG_BOOTDELAY 1
+#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr=0x80080000\0" \
+ "initrd_addr=0x84000000\0" \
+ "fdt_addr=0x83000000\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "initrd_high=0xffffffffffffffff\0"
+
+#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
+ "0x1c090000 debug user_debug=31 "\
+ "androidboot.hardware=fvpbase "\
+ "root=/dev/vda2 rw "\
+ "rootwait "\
+ "loglevel=9"
+
+#define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr"
+
+#define CONFIG_BOOTDELAY 1
+
#else
#error "Unknown board variant"
#endif
Create an additional FVP configuration to boot images pre-loaded into DRAM. Sometimes it's preferential to boot the model by loading the files directly into DRAM via model parameters, rather than using SemiHosting. An example of model parmaters that are used to pre-load the files into DRAM: --data cluster0.cpu0=Image@0x80080000 \ --data cluster0.cpu0=fvp-base-gicv2-psci.dtb@0x83000000 \ --data cluster0.cpu0=uInitrd@0x84000000 Signedoff-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/Kconfig | 4 ++++ configs/vexpress_aemv8a_dram_defconfig | 19 +++++++++++++++++++ include/configs/vexpress_aemv8a.h | 25 +++++++++++++++++++++++-- 3 files changed, 46 insertions(+), 2 deletions(-)