@@ -73,6 +73,11 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
return 0;
}
+static void pnw_exit(struct mid8250 *mid)
+{
+ pci_dev_put(mid->dma_dev);
+}
+
static int tng_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
@@ -124,6 +129,11 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p)
return 0;
}
+static void tng_exit(struct mid8250 *mid)
+{
+ pci_dev_put(mid->dma_dev);
+}
+
static int dnv_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
@@ -330,9 +340,9 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_drvdata(pdev, mid);
return 0;
+
err:
- if (mid->board->exit)
- mid->board->exit(mid);
+ mid->board->exit(mid);
return ret;
}
@@ -342,8 +352,7 @@ static void mid8250_remove(struct pci_dev *pdev)
serial8250_unregister_port(mid->line);
- if (mid->board->exit)
- mid->board->exit(mid);
+ mid->board->exit(mid);
}
static const struct mid8250_board pnw_board = {
@@ -351,6 +360,7 @@ static const struct mid8250_board pnw_board = {
.freq = 50000000,
.base_baud = 115200,
.setup = pnw_setup,
+ .exit = pnw_exit,
};
static const struct mid8250_board tng_board = {
@@ -358,6 +368,7 @@ static const struct mid8250_board tng_board = {
.freq = 38400000,
.base_baud = 1843200,
.setup = tng_setup,
+ .exit = tng_exit,
};
static const struct mid8250_board dnv_board = {
The pci_get_slot() increases its reference count, the caller must decrement the reference count by calling pci_dev_put(). Fixes: 90b9aacf912a ("serial: 8250_pci: add Intel Tangier support") Fixes: f549e94effa1 ("serial: 8250_pci: add Intel Penwell ports") Depends-on: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver") Reported-by: Qing Wang <wangqing@vivo.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/tty/serial/8250/8250_mid.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)