@@ -266,6 +266,55 @@ sdmmc2: mmc@e120c000 {
status = "disabled";
};
+ csi2dc: csi2dc@e1404000 {
+ compatible = "microchip,sama7g5-csi2dc";
+ reg = <0xe1404000 0x500>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
+ clock-names = "pclk", "scck";
+ assigned-clocks = <&xisc>;
+ assigned-clock-rates = <266000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ csi2dc_in: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ csi2dc_out: endpoint {
+ bus-width = <14>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ remote-endpoint = <&xisc_in>;
+ };
+ };
+ };
+ };
+
+ xisc: xisc@e1408000 {
+ compatible = "microchip,sama7g5-isc";
+ reg = <0xe1408000 0x2000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+ clock-names = "hclock";
+ #clock-cells = <0>;
+ clock-output-names = "isc-mck";
+
+ port {
+ xisc_in: endpoint {
+ bus-type = <5>; /* Parallel */
+ bus-width = <14>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ remote-endpoint = <&csi2dc_out>;
+ };
+ };
+ };
+
pwm: pwm@e1604000 {
compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
reg = <0xe1604000 0x4000>;
Add node for the XISC (eXtended Image Sensor Controller) and CSI2DC (csi2 demux controller). These nodes represent the top level of the video capture hardware pipeline and are directly connected in hardware. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- arch/arm/boot/dts/sama7g5.dtsi | 49 ++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)