diff mbox series

[v6,01/31] scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands

Message ID 20220220031810.738362-2-damien.lemoal@opensource.wdc.com
State New
Headers show
Series libsas and pm8001 fixes | expand

Commit Message

Damien Le Moal Feb. 20, 2022, 3:17 a.m. UTC 
To detect for the DMA_NONE (no data transfer) DMA direction,
sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA.
This test does not include the ATA_CMD_NCQ_NON_DATA command as this
command protocol is defined as ATA_PROT_NCQ_NODATA (equal to
ATA_PROT_FLAG_NCQ) and not as ATA_PROT_NODATA.

To include both NCQ and non-NCQ commands when testing for the DMA_NONE
DMA direction, use "!ata_is_data()".

Fixes: 176ddd89171d ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
---
 drivers/scsi/libsas/sas_ata.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index d89ffb357f14..dd4ae5e8cb5c 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -195,7 +195,7 @@  static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
 		task->total_xfer_len = qc->nbytes;
 		task->num_scatter = qc->n_elem;
 		task->data_dir = qc->dma_dir;
-	} else if (qc->tf.protocol == ATA_PROT_NODATA) {
+	} else if (!ata_is_data(qc->tf.protocol)) {
 		task->data_dir = DMA_NONE;
 	} else {
 		for_each_sg(qc->sg, sg, qc->n_elem, si)