[2/2] arm: exynos: allow platform-lcd driver to control lcd regulator source on origen

The buck7 regulator of max8997 pmic which provides the power source to lcd panel
and the lvds transmitter is allowed to be controlled by the platform-lcd driver.
It is not required to apply the voltage source by default. Also, the voltage
range for buck7 regulator is modified as the per the values in the datasheet.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
 arch/arm/mach-exynos/mach-origen.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)

On 12/5/11, Thomas Abraham <thomas.abraham@linaro.org> wrote:
> The buck7 regulator of max8997 pmic which provides the power source to lcd
> panel
> and the lvds transmitter is allowed to be controlled by the platform-lcd
> driver.
> It is not required to apply the voltage source by default. Also, the voltage
> range for buck7 regulator is modified as the per the values in the
> datasheet.
>
> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
> ---
>  arch/arm/mach-exynos/mach-origen.c |   12 +++++++-----
>  1 files changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/mach-origen.c
> b/arch/arm/mach-exynos/mach-origen.c
> index f56d027..5456254 100644
> --- a/arch/arm/mach-exynos/mach-origen.c
> +++ b/arch/arm/mach-exynos/mach-origen.c
> @@ -126,7 +126,7 @@ static struct regulator_consumer_supply __initdata
> buck3_consumer[] = {
>  	REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
>  };
>  static struct regulator_consumer_supply __initdata buck7_consumer[] = {
> -	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
> +	REGULATOR_SUPPLY("vcc_lcd", "platform-lcd.0"), /* LCD */
>  };
>
>  static struct regulator_init_data __initdata max8997_ldo1_data = {
> @@ -379,11 +379,11 @@ static struct regulator_init_data __initdata
> max8997_buck5_data = {
>  static struct regulator_init_data __initdata max8997_buck7_data = {
>  	.constraints	= {
>  		.name		= "VDD_LCD_3.3V",
> -		.min_uV		= 3300000,
> -		.max_uV		= 3300000,
> +		.min_uV		= 750000,
> +		.max_uV		= 3900000,
It can support the voltage change at buck itself, but in board it's
fixed. I'm not sure it's correct usage at board file.

I think original code is better to understand and use it as name, it's
fixed v3.3 voltage.

Thank you,
Kyungmin Park
>  		.boot_on	= 1,
> -		.apply_uV	= 1,
> -		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
> +		.valid_ops_mask	= REGULATOR_CHANGE_STATUS |
> +					REGULATOR_CHANGE_VOLTAGE,
>  		.state_mem	= {
>  			.disabled	= 1
>  		},
> @@ -562,6 +562,8 @@ static void lcd_hv070wsa_set_power(struct plat_lcd_data
> *pd, unsigned int power)
>
>  static struct plat_lcd_data origen_lcd_hv070wsa_data = {
>  	.set_power = lcd_hv070wsa_set_power,
> +	.min_uV		= 3300000,
> +	.max_uV		= 3300000,
>  };
>
>  static struct platform_device origen_lcd_hv070wsa = {
> --
> 1.6.6.rc2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Dear Mr. Park,

On 5 December 2011 15:44, Kyungmin Park <kmpark@infradead.org> wrote:

[...]

>>  static struct regulator_init_data __initdata max8997_ldo1_data = {
>> @@ -379,11 +379,11 @@ static struct regulator_init_data __initdata
>> max8997_buck5_data = {
>>  static struct regulator_init_data __initdata max8997_buck7_data = {
>>       .constraints    = {
>>               .name           = "VDD_LCD_3.3V",
>> -             .min_uV         = 3300000,
>> -             .max_uV         = 3300000,
>> +             .min_uV         = 750000,
>> +             .max_uV         = 3900000,
> It can support the voltage change at buck itself, but in board it's
> fixed. I'm not sure it's correct usage at board file.
>
> I think original code is better to understand and use it as name, it's
> fixed v3.3 voltage.

Yes, that is true. If the board cannot support any other voltage for
buck7, there is no need to change min_uV and max_uV. I will revert it
to the original values.

Thanks,
Thomas.

>
> Thank you,
> Kyungmin Park

[...]