| Message ID | dba1c05e4bfdf53e631ff134eaa9449e2ad5deef.1645573830.git.objelf@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/2] Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921 | expand |
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=616926 ---Test result--- Test Summary: CheckPatch PASS 3.47 seconds GitLint FAIL 2.10 seconds SubjectPrefix PASS 1.86 seconds BuildKernel PASS 40.56 seconds BuildKernel32 PASS 35.11 seconds Incremental Build with patchesPASS 53.96 seconds TestRunner: Setup PASS 613.32 seconds TestRunner: l2cap-tester PASS 16.84 seconds TestRunner: bnep-tester PASS 7.62 seconds TestRunner: mgmt-tester PASS 130.91 seconds TestRunner: rfcomm-tester PASS 10.12 seconds TestRunner: sco-tester PASS 9.88 seconds TestRunner: smp-tester PASS 9.78 seconds TestRunner: userchan-tester PASS 8.34 seconds Details ############################## Test: GitLint - FAIL - 2.10 seconds Run gitlint with rule in .gitlint [2/2] Bluetooth: btmtksdio: Fix kernel oops when sdio suspend. 1: T3 Title has trailing punctuation (.): "[2/2] Bluetooth: btmtksdio: Fix kernel oops when sdio suspend." --- Regards, Linux Bluetooth
Hi Sean, > Add VID 13D3 & PID 3567 for MediaTek MT7921 USB Bluetooth chip. > > The information in /sys/kernel/debug/usb/devices about the Bluetooth > device is listed as the below. > > T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=13d3 ProdID=3567 Rev= 1.00 > S: Manufacturer=MediaTek Inc. > S: Product=Wireless_Device > S: SerialNumber=000000000 > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us > I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us > > Co-developed-by: Sean Wang <sean.wang@mediatek.com> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > Signed-off-by: Yake Yang <yake.yang@mediatek.com> > --- > drivers/bluetooth/btusb.c | 3 +++ > 1 file changed, 3 insertions(+) patch has been applied to bluetooth-next tree. Regards Marcel
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 558151f2f150..9f8c3d41d504 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -455,6 +455,9 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3564), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x13d3, 0x3567), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, { USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES },