diff mbox series

[v2] media: m5mols: Convert to use GPIO descriptors

Message ID 20220224001307.148851-1-linus.walleij@linaro.org
State Accepted
Commit aaaf357fa61c00376cd8718d36bf06b7f0cbeead
Headers show
Series [v2] media: m5mols: Convert to use GPIO descriptors | expand

Commit Message

Linus Walleij Feb. 24, 2022, 12:13 a.m. UTC 
The Fujitsu M5MOLS sensor driver is using a reset GPIO number
passed from platform data.

No machine/board descriptor file in the kernel is using this so
let's replace it with a GPIO descriptor.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Heungjun Kim <riverful.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Also delete the platform data entries that are no longer
  in use.
---
 drivers/media/i2c/m5mols/m5mols.h         |  2 ++
 drivers/media/i2c/m5mols/m5mols_capture.c |  1 -
 drivers/media/i2c/m5mols/m5mols_core.c    | 29 ++++++++---------------
 include/media/i2c/m5mols.h                |  4 ----
 4 files changed, 12 insertions(+), 24 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/m5mols/m5mols.h b/drivers/media/i2c/m5mols/m5mols.h
index 60c102fa7df5..b56eb0a8ee97 100644
--- a/drivers/media/i2c/m5mols/m5mols.h
+++ b/drivers/media/i2c/m5mols/m5mols.h
@@ -13,6 +13,7 @@ 
 #define M5MOLS_H
 
 #include <linux/sizes.h>
+#include <linux/gpio/consumer.h>
 #include <media/v4l2-subdev.h>
 #include "m5mols_reg.h"
 
@@ -224,6 +225,7 @@  struct m5mols_info {
 	struct v4l2_ctrl *jpeg_quality;
 
 	int (*set_power)(struct device *dev, int on);
+	struct gpio_desc *reset;
 
 	struct mutex lock;
 
diff --git a/drivers/media/i2c/m5mols/m5mols_capture.c b/drivers/media/i2c/m5mols/m5mols_capture.c
index e1b1d689c044..275c5b2539fd 100644
--- a/drivers/media/i2c/m5mols/m5mols_capture.c
+++ b/drivers/media/i2c/m5mols/m5mols_capture.c
@@ -15,7 +15,6 @@ 
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-ctrls.h>
diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c
index e29be0242f07..c19590389bfe 100644
--- a/drivers/media/i2c/m5mols/m5mols_core.c
+++ b/drivers/media/i2c/m5mols/m5mols_core.c
@@ -14,7 +14,7 @@ 
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/regulator/consumer.h>
 #include <linux/videodev2.h>
 #include <linux/module.h>
@@ -752,7 +752,6 @@  static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
 {
 	struct v4l2_subdev *sd = &info->sd;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	const struct m5mols_platform_data *pdata = info->pdata;
 	int ret;
 
 	if (info->power == enable)
@@ -772,7 +771,7 @@  static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
 			return ret;
 		}
 
-		gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity);
+		gpiod_set_value(info->reset, 0);
 		info->power = 1;
 
 		return ret;
@@ -785,7 +784,7 @@  static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
 	if (info->set_power)
 		info->set_power(&client->dev, 0);
 
-	gpio_set_value(pdata->gpio_reset, pdata->reset_polarity);
+	gpiod_set_value(info->reset, 1);
 
 	info->isp_ready = 0;
 	info->power = 0;
@@ -944,7 +943,6 @@  static int m5mols_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	const struct m5mols_platform_data *pdata = client->dev.platform_data;
-	unsigned long gpio_flags;
 	struct m5mols_info *info;
 	struct v4l2_subdev *sd;
 	int ret;
@@ -954,11 +952,6 @@  static int m5mols_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	if (!gpio_is_valid(pdata->gpio_reset)) {
-		dev_err(&client->dev, "No valid RESET GPIO specified\n");
-		return -EINVAL;
-	}
-
 	if (!client->irq) {
 		dev_err(&client->dev, "Interrupt not assigned\n");
 		return -EINVAL;
@@ -968,18 +961,16 @@  static int m5mols_probe(struct i2c_client *client,
 	if (!info)
 		return -ENOMEM;
 
+	/* This asserts reset, descriptor shall have polarity specified */
+	info->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(info->reset))
+		return PTR_ERR(info->reset);
+	/* Notice: the "N" in M5MOLS_NRST implies active low */
+	gpiod_set_consumer_name(info->reset, "M5MOLS_NRST");
+
 	info->pdata = pdata;
 	info->set_power	= pdata->set_power;
 
-	gpio_flags = pdata->reset_polarity
-		   ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-	ret = devm_gpio_request_one(&client->dev, pdata->gpio_reset, gpio_flags,
-				    "M5MOLS_NRST");
-	if (ret) {
-		dev_err(&client->dev, "Failed to request gpio: %d\n", ret);
-		return ret;
-	}
-
 	ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies),
 				      supplies);
 	if (ret) {
diff --git a/include/media/i2c/m5mols.h b/include/media/i2c/m5mols.h
index 9cec5a09e125..a56ae353c891 100644
--- a/include/media/i2c/m5mols.h
+++ b/include/media/i2c/m5mols.h
@@ -14,15 +14,11 @@ 
 
 /**
  * struct m5mols_platform_data - platform data for M-5MOLS driver
- * @gpio_reset:	GPIO driving the reset pin of M-5MOLS
- * @reset_polarity: active state for gpio_reset pin, 0 or 1
  * @set_power:	an additional callback to the board setup code
  *		to be called after enabling and before disabling
  *		the sensor's supply regulators
  */
 struct m5mols_platform_data {
-	int gpio_reset;
-	u8 reset_polarity;
 	int (*set_power)(struct device *dev, int on);
 };