diff mbox series

[RESEND,v7,2/2] dt-bindings: soundwire: qcom: Add bindings for audio clock reset control property

Message ID 1646317851-14414-3-git-send-email-quic_srivasam@quicinc.com
State Superseded
Headers show
Series Add support for SoundWire1.6 audio cgcr register control | expand

Commit Message

Srinivasa Rao Mandadapu March 3, 2022, 2:30 p.m. UTC 
Update description for audio clock reset control property, which is required
for latest chipsets, to allow rx, tx and wsa bus clock enabling in software
 control mode by configuring dynamic clock gating control registers.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/soundwire/qcom,sdw.txt | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
index b93a2b3..32e156d 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
@@ -150,6 +150,18 @@  board specific bus parameters.
 		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
+- reset:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: Should specify the SoundWire audio CSR reset controller interface,
+		    which is required for SoundWire version 1.6.0 and above.
+
+- reset-names:
+	Usage: optional
+	Value type: <stringlist>
+	Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset
+		    controller interface.
+
 Note:
 	More Information on detail of encoding of these fields can be
 found in MIPI Alliance SoundWire 1.0 Specifications.
@@ -168,6 +180,8 @@  soundwire: soundwire@c85 {
 	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 	clocks = <&wcc>;
 	clock-names = "iface";
+	resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
+	reset-names = "swr_audio_cgcr";
 	#sound-dai-cells = <1>;
 	qcom,dports-type = <0>;
 	qcom,dout-ports	= <6>;