diff mbox series

[1/5] arm64: dts: qcom: msm8996: Drop flags for mdss irqs

Message ID 20220302005210.2267725-1-dmitry.baryshkov@linaro.org
State Accepted
Commit 7b36ab2673b359d1daf4da9e42597edc5ef866fa
Headers show
Series [1/5] arm64: dts: qcom: msm8996: Drop flags for mdss irqs | expand

Commit Message

Dmitry Baryshkov March 2, 2022, 12:52 a.m. UTC 
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f0f81c23c16f..0597d865a4a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -788,7 +788,7 @@  mdp: mdp@901000 {
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				clocks = <&mmcc MDSS_AHB_CLK>,
 					 <&mmcc MDSS_AXI_CLK>,
@@ -834,7 +834,7 @@  dsi0: dsi@994000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_BYTE0_CLK>,
@@ -904,7 +904,7 @@  hdmi: hdmi-tx@9a0000 {
 					    "hdcp_physical";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <8>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,