| Message ID | 20220303145944.307321-2-sunilvl@ventanamicro.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | RISCV_EFI_BOOT_PROTOCOL support in linux | expand |
On Thu, 03 Mar 2022 06:59:44 PST (-0800), sunilvl@ventanamicro.com wrote: > This patch adds the support for getting the boot hart ID in > Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This protocol > is preferred method over existing DT based solution since it > works irrespective of DT or ACPI. > > The specification of the protocol is hosted at: > https://github.com/riscv-non-isa/riscv-uefi > > Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> > --- > drivers/firmware/efi/libstub/efistub.h | 7 ++++++ > drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++---- > include/linux/efi.h | 1 + > 3 files changed, 32 insertions(+), 5 deletions(-) > > diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h > index edb77b0621ea..aced62a0907e 100644 > --- a/drivers/firmware/efi/libstub/efistub.h > +++ b/drivers/firmware/efi/libstub/efistub.h > @@ -720,6 +720,13 @@ union efi_tcg2_protocol { > } mixed_mode; > }; > > +struct riscv_efi_boot_protocol { > + u64 revision; > + > + efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this, > + size_t *boot_hartid); > +}; > + > typedef union efi_load_file_protocol efi_load_file_protocol_t; > typedef union efi_load_file_protocol efi_load_file2_protocol_t; > > diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c > index 9c460843442f..915ad209d004 100644 > --- a/drivers/firmware/efi/libstub/riscv-stub.c > +++ b/drivers/firmware/efi/libstub/riscv-stub.c > @@ -23,7 +23,7 @@ > > typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long); > > -static u32 hartid; > +static size_t hartid; > > static int get_boot_hartid_from_fdt(void) > { > @@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void) > return 0; > } > > +static efi_status_t get_boot_hartid_from_efi(void) > +{ > + efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID; > + efi_status_t status; > + struct riscv_efi_boot_protocol *boot_protocol; > + > + status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL, > + (void **)&boot_protocol); > + if (status == EFI_SUCCESS) { > + status = efi_call_proto(boot_protocol, > + get_boot_hartid, &hartid); > + } > + return status; > +} > + > efi_status_t check_platform_features(void) > { > int ret; > + efi_status_t status; > > - ret = get_boot_hartid_from_fdt(); > - if (ret) { > - efi_err("/chosen/boot-hartid missing or invalid!\n"); > - return EFI_UNSUPPORTED; > + status = get_boot_hartid_from_efi(); > + if (status != EFI_SUCCESS) { > + ret = get_boot_hartid_from_fdt(); > + if (ret) { > + efi_err("/chosen/boot-hartid missing or invalid!\n"); Is that the right error message? IIUC it doesn't really make sense in an ACPI context, that's a DT-ism. > + return EFI_UNSUPPORTED; > + } > } > return EFI_SUCCESS; > } > diff --git a/include/linux/efi.h b/include/linux/efi.h > index ccd4d3f91c98..9822c730207c 100644 > --- a/include/linux/efi.h > +++ b/include/linux/efi.h > @@ -380,6 +380,7 @@ void efi_native_runtime_setup(void); > #define EFI_CONSOLE_OUT_DEVICE_GUID EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d) > #define APPLE_PROPERTIES_PROTOCOL_GUID EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb, 0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0) > #define EFI_TCG2_PROTOCOL_GUID EFI_GUID(0x607f766c, 0x7455, 0x42be, 0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f) > +#define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf) > #define EFI_LOAD_FILE_PROTOCOL_GUID EFI_GUID(0x56ec3091, 0x954c, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b) > #define EFI_LOAD_FILE2_PROTOCOL_GUID EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e, 0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d) > #define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
On Tue, Mar 22, 2022 at 06:32:20PM -0700, Palmer Dabbelt wrote: > On Thu, 03 Mar 2022 06:59:44 PST (-0800), sunilvl@ventanamicro.com wrote: > > This patch adds the support for getting the boot hart ID in > > Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This protocol > > is preferred method over existing DT based solution since it > > works irrespective of DT or ACPI. > > > > The specification of the protocol is hosted at: > > https://github.com/riscv-non-isa/riscv-uefi > > > > Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> > > --- > > drivers/firmware/efi/libstub/efistub.h | 7 ++++++ > > drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++---- > > include/linux/efi.h | 1 + > > 3 files changed, 32 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h > > index edb77b0621ea..aced62a0907e 100644 > > --- a/drivers/firmware/efi/libstub/efistub.h > > +++ b/drivers/firmware/efi/libstub/efistub.h > > @@ -720,6 +720,13 @@ union efi_tcg2_protocol { > > } mixed_mode; > > }; > > > > +struct riscv_efi_boot_protocol { > > + u64 revision; > > + > > + efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this, > > + size_t *boot_hartid); > > +}; > > + > > typedef union efi_load_file_protocol efi_load_file_protocol_t; > > typedef union efi_load_file_protocol efi_load_file2_protocol_t; > > > > diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c > > index 9c460843442f..915ad209d004 100644 > > --- a/drivers/firmware/efi/libstub/riscv-stub.c > > +++ b/drivers/firmware/efi/libstub/riscv-stub.c > > @@ -23,7 +23,7 @@ > > > > typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long); > > > > -static u32 hartid; > > +static size_t hartid; > > > > static int get_boot_hartid_from_fdt(void) > > { > > @@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void) > > return 0; > > } > > > > +static efi_status_t get_boot_hartid_from_efi(void) > > +{ > > + efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID; > > + efi_status_t status; > > + struct riscv_efi_boot_protocol *boot_protocol; > > + > > + status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL, > > + (void **)&boot_protocol); > > + if (status == EFI_SUCCESS) { > > + status = efi_call_proto(boot_protocol, > > + get_boot_hartid, &hartid); > > + } > > + return status; > > +} > > + > > efi_status_t check_platform_features(void) > > { > > int ret; > > + efi_status_t status; > > > > - ret = get_boot_hartid_from_fdt(); > > - if (ret) { > > - efi_err("/chosen/boot-hartid missing or invalid!\n"); > > - return EFI_UNSUPPORTED; > > + status = get_boot_hartid_from_efi(); > > + if (status != EFI_SUCCESS) { > > + ret = get_boot_hartid_from_fdt(); > > + if (ret) { > > + efi_err("/chosen/boot-hartid missing or invalid!\n"); > > Is that the right error message? IIUC it doesn't really make sense in an > ACPI context, that's a DT-ism. Sure. Will update this message in next version. Thanks Sunil > > > + return EFI_UNSUPPORTED; > > + } > > } > > return EFI_SUCCESS; > > } > > diff --git a/include/linux/efi.h b/include/linux/efi.h > > index ccd4d3f91c98..9822c730207c 100644 > > --- a/include/linux/efi.h > > +++ b/include/linux/efi.h > > @@ -380,6 +380,7 @@ void efi_native_runtime_setup(void); > > #define EFI_CONSOLE_OUT_DEVICE_GUID EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d) > > #define APPLE_PROPERTIES_PROTOCOL_GUID EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb, 0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0) > > #define EFI_TCG2_PROTOCOL_GUID EFI_GUID(0x607f766c, 0x7455, 0x42be, 0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f) > > +#define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf) > > #define EFI_LOAD_FILE_PROTOCOL_GUID EFI_GUID(0x56ec3091, 0x954c, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b) > > #define EFI_LOAD_FILE2_PROTOCOL_GUID EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e, 0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d) > > #define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index edb77b0621ea..aced62a0907e 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -720,6 +720,13 @@ union efi_tcg2_protocol { } mixed_mode; }; +struct riscv_efi_boot_protocol { + u64 revision; + + efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this, + size_t *boot_hartid); +}; + typedef union efi_load_file_protocol efi_load_file_protocol_t; typedef union efi_load_file_protocol efi_load_file2_protocol_t; diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c index 9c460843442f..915ad209d004 100644 --- a/drivers/firmware/efi/libstub/riscv-stub.c +++ b/drivers/firmware/efi/libstub/riscv-stub.c @@ -23,7 +23,7 @@ typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long); -static u32 hartid; +static size_t hartid; static int get_boot_hartid_from_fdt(void) { @@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void) return 0; } +static efi_status_t get_boot_hartid_from_efi(void) +{ + efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID; + efi_status_t status; + struct riscv_efi_boot_protocol *boot_protocol; + + status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL, + (void **)&boot_protocol); + if (status == EFI_SUCCESS) { + status = efi_call_proto(boot_protocol, + get_boot_hartid, &hartid); + } + return status; +} + efi_status_t check_platform_features(void) { int ret; + efi_status_t status; - ret = get_boot_hartid_from_fdt(); - if (ret) { - efi_err("/chosen/boot-hartid missing or invalid!\n"); - return EFI_UNSUPPORTED; + status = get_boot_hartid_from_efi(); + if (status != EFI_SUCCESS) { + ret = get_boot_hartid_from_fdt(); + if (ret) { + efi_err("/chosen/boot-hartid missing or invalid!\n"); + return EFI_UNSUPPORTED; + } } return EFI_SUCCESS; } diff --git a/include/linux/efi.h b/include/linux/efi.h index ccd4d3f91c98..9822c730207c 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -380,6 +380,7 @@ void efi_native_runtime_setup(void); #define EFI_CONSOLE_OUT_DEVICE_GUID EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d) #define APPLE_PROPERTIES_PROTOCOL_GUID EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb, 0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0) #define EFI_TCG2_PROTOCOL_GUID EFI_GUID(0x607f766c, 0x7455, 0x42be, 0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f) +#define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf) #define EFI_LOAD_FILE_PROTOCOL_GUID EFI_GUID(0x56ec3091, 0x954c, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b) #define EFI_LOAD_FILE2_PROTOCOL_GUID EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e, 0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d) #define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
This patch adds the support for getting the boot hart ID in Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This protocol is preferred method over existing DT based solution since it works irrespective of DT or ACPI. The specification of the protocol is hosted at: https://github.com/riscv-non-isa/riscv-uefi Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> --- drivers/firmware/efi/libstub/efistub.h | 7 ++++++ drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++---- include/linux/efi.h | 1 + 3 files changed, 32 insertions(+), 5 deletions(-)