@@ -72,7 +72,17 @@ qmss: qmss@2a40000 {
qalloc-by-id;
};
};
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ qalloc-by-id;
+ };
+ };
};
+
descriptor-regions {
#address-cells = <1>;
#size-cells = <1>;
@@ -83,6 +93,19 @@ qmss: qmss@2a40000 {
link-index = <0x4000>;
};
};
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
}; /* qmss */
knav_dmas: knav_dmas@0 {
@@ -47,6 +47,7 @@ qmss: qmss@2a40000 {
"region", "push", "pop";
};
};
+
queue-pools {
qpend {
qpend-0 {
@@ -88,7 +89,17 @@ qmss: qmss@2a40000 {
qalloc-by-id;
};
};
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ qalloc-by-id;
+ };
+ };
};
+
descriptor-regions {
#address-cells = <1>;
#size-cells = <1>;
@@ -99,6 +110,19 @@ qmss: qmss@2a40000 {
link-index = <0x4000>;
};
};
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
}; /* qmss */
knav_dmas: knav_dmas@0 {
@@ -72,7 +72,16 @@ qmss: qmss@2a40000 {
qalloc-by-id;
};
};
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ };
+ };
};
+
descriptor-regions {
#address-cells = <1>;
#size-cells = <1>;
@@ -83,6 +92,20 @@ qmss: qmss@2a40000 {
link-index = <0x4000>;
};
};
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
+
}; /* qmss */
knav_dmas: knav_dmas@0 {
Add low priority accumulator channel that can monitor multiple QMSS queues. User for example could use the accumular queue for Netcp Rx completion. While at it, also add an extra line end of each top level node in DTS to make it more readable. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> --- - dependent on [PATCH v3} soc: ti: knav_qmss: enable accumulator queue support. Maintainer, please send this to v4.4 next after the above is merged. arch/arm/boot/dts/k2e-netcp.dtsi | 23 +++++++++++++++++++++++ arch/arm/boot/dts/k2hk-netcp.dtsi | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/k2l-netcp.dtsi | 23 +++++++++++++++++++++++ 3 files changed, 70 insertions(+)