@@ -359,6 +359,18 @@ config HW_RANDOM_XGENE
If unsure, say Y.
+config HW_RANDOM_STM32
+ tristate "STMicroelectronics STM32 random number generator"
+ depends on HW_RANDOM && (ARCH_STM32 || COMPILE_TEST)
+ help
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on STM32 microcontrollers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stm32-rng.
+
+ If unsure, say N.
+
endif # HW_RANDOM
config UML_RANDOM
@@ -31,3 +31,4 @@ obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
obj-$(CONFIG_HW_RANDOM_IPROC_RNG200) += iproc-rng200.o
obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
obj-$(CONFIG_HW_RANDOM_XGENE) += xgene-rng.o
+obj-$(CONFIG_HW_RANDOM_STM32) += stm32-rng.o
new file mode 100644
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2015, Daniel Thompson
+ *
+ * This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#define RNG_CR 0x00
+#define RNG_CR_RNGEN BIT(2)
+
+#define RNG_SR 0x04
+#define RNG_SR_SEIS BIT(6)
+#define RNG_SR_CEIS BIT(5)
+#define RNG_SR_DRDY BIT(0)
+
+#define RNG_DR 0x08
+
+/*
+ * It takes 40 cycles @ 48MHz to generate each random number (e.g. <1us).
+ * At the time of writing STM32 parts max out at ~200MHz meaning a timeout
+ * of 500 leaves us a very comfortable margin for error. The loop to which
+ * the timeout applies takes at least 4 instructions per iteration so the
+ * timeout is enough to take us up to multi-GHz parts!
+ */
+#define RNG_TIMEOUT 500
+
+struct stm32_rng_private {
+ struct hwrng rng;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static int stm32_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+ struct stm32_rng_private *priv =
+ container_of(rng, struct stm32_rng_private, rng);
+ u32 sr;
+ int retval = 0;
+
+ pm_runtime_get_sync((struct device *) priv->rng.priv);
+
+ while (max > sizeof(u32)) {
+ sr = readl_relaxed(priv->base + RNG_SR);
+ if (!sr && wait) {
+ unsigned int timeout = RNG_TIMEOUT;
+
+ do {
+ cpu_relax();
+ sr = readl_relaxed(priv->base + RNG_SR);
+ } while (!sr && --timeout);
+ }
+
+ /* If error detected or data not ready... */
+ if (sr != RNG_SR_DRDY)
+ break;
+
+ *(u32 *)data = readl_relaxed(priv->base + RNG_DR);
+
+ retval += sizeof(u32);
+ data += sizeof(u32);
+ max -= sizeof(u32);
+ }
+
+ if (WARN_ONCE(sr & (RNG_SR_SEIS | RNG_SR_CEIS),
+ "bad RNG status - %x\n", sr))
+ writel_relaxed(0, priv->base + RNG_SR);
+
+ pm_runtime_mark_last_busy((struct device *) priv->rng.priv);
+ pm_runtime_put_sync_autosuspend((struct device *) priv->rng.priv);
+
+ return retval || !wait ? retval : -EIO;
+}
+
+static int stm32_rng_init(struct hwrng *rng)
+{
+ struct stm32_rng_private *priv =
+ container_of(rng, struct stm32_rng_private, rng);
+ int err;
+
+ err = clk_prepare_enable(priv->clk);
+ if (err)
+ return err;
+
+ writel_relaxed(RNG_CR_RNGEN, priv->base + RNG_CR);
+
+ /* clear error indicators */
+ writel_relaxed(0, priv->base + RNG_SR);
+
+ return 0;
+}
+
+static void stm32_rng_cleanup(struct hwrng *rng)
+{
+ struct stm32_rng_private *priv =
+ container_of(rng, struct stm32_rng_private, rng);
+
+ writel_relaxed(0, priv->base + RNG_CR);
+ clk_disable_unprepare(priv->clk);
+}
+
+static int stm32_rng_probe(struct platform_device *ofdev)
+{
+ struct device *dev = &ofdev->dev;
+ struct device_node *np = ofdev->dev.of_node;
+ struct stm32_rng_private *priv;
+ struct resource res;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(struct stm32_rng_private), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ err = of_address_to_resource(np, 0, &res);
+ if (err)
+ return err;
+
+ priv->base = devm_ioremap_resource(dev, &res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->clk = devm_clk_get(&ofdev->dev, NULL);
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ dev_set_drvdata(dev, priv);
+
+ priv->rng.name = dev_driver_string(dev),
+#ifndef CONFIG_PM
+ priv->rng.init = stm32_rng_init,
+ priv->rng.cleanup = stm32_rng_cleanup,
+#endif
+ priv->rng.read = stm32_rng_read,
+ priv->rng.priv = (unsigned long) dev;
+
+ pm_runtime_set_autosuspend_delay(dev, 100);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_enable(dev);
+
+ return devm_hwrng_register(dev, &priv->rng);
+}
+
+#ifdef CONFIG_PM
+static int stm32_rng_runtime_suspend(struct device *dev)
+{
+ struct stm32_rng_private *priv = dev_get_drvdata(dev);
+
+ stm32_rng_cleanup(&priv->rng);
+
+ return 0;
+}
+
+static int stm32_rng_runtime_resume(struct device *dev)
+{
+ struct stm32_rng_private *priv = dev_get_drvdata(dev);
+
+ return stm32_rng_init(&priv->rng);
+}
+#endif
+
+static UNIVERSAL_DEV_PM_OPS(stm32_rng_pm_ops, stm32_rng_runtime_suspend,
+ stm32_rng_runtime_resume, NULL);
+
+static const struct of_device_id stm32_rng_match[] = {
+ {
+ .compatible = "st,stm32-rng",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stm32_rng_match);
+
+static struct platform_driver stm32_rng_driver = {
+ .driver = {
+ .name = "stm32-rng",
+ .pm = &stm32_rng_pm_ops,
+ .of_match_table = stm32_rng_match,
+ },
+ .probe = stm32_rng_probe,
+};
+
+module_platform_driver(stm32_rng_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Daniel Thompson <daniel.thompson@linaro.org>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 RNG device driver");