@@ -119,6 +119,8 @@ struct ingenic_chip_info {
unsigned int num_functions;
const u32 *pull_ups, *pull_downs;
+
+ const struct regmap_access_table *access_table;
};
struct ingenic_pinctrl {
@@ -2179,6 +2181,17 @@ static const struct function_desc x1000_functions[] = {
{ "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), },
};
+static const struct regmap_range x1000_access_ranges[] = {
+ regmap_reg_range(0x000, 0x400 - 4),
+ regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X1500 */
+static const struct regmap_access_table x1000_access_table = {
+ .yes_ranges = x1000_access_ranges,
+ .n_yes_ranges = ARRAY_SIZE(x1000_access_ranges),
+};
+
static const struct ingenic_chip_info x1000_chip_info = {
.num_chips = 4,
.reg_offset = 0x100,
@@ -2189,6 +2202,7 @@ static const struct ingenic_chip_info x1000_chip_info = {
.num_functions = ARRAY_SIZE(x1000_functions),
.pull_ups = x1000_pull_ups,
.pull_downs = x1000_pull_downs,
+ .access_table = &x1000_access_table,
};
static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
@@ -2300,6 +2314,7 @@ static const struct ingenic_chip_info x1500_chip_info = {
.num_functions = ARRAY_SIZE(x1500_functions),
.pull_ups = x1000_pull_ups,
.pull_downs = x1000_pull_downs,
+ .access_table = &x1000_access_table,
};
static const u32 x1830_pull_ups[4] = {
@@ -2506,6 +2521,16 @@ static const struct function_desc x1830_functions[] = {
{ "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
};
+static const struct regmap_range x1830_access_ranges[] = {
+ regmap_reg_range(0x0000, 0x4000 - 4),
+ regmap_reg_range(0x7000, 0x8000 - 4),
+};
+
+static const struct regmap_access_table x1830_access_table = {
+ .yes_ranges = x1830_access_ranges,
+ .n_yes_ranges = ARRAY_SIZE(x1830_access_ranges),
+};
+
static const struct ingenic_chip_info x1830_chip_info = {
.num_chips = 4,
.reg_offset = 0x1000,
@@ -2516,6 +2541,7 @@ static const struct ingenic_chip_info x1830_chip_info = {
.num_functions = ARRAY_SIZE(x1830_functions),
.pull_ups = x1830_pull_ups,
.pull_downs = x1830_pull_downs,
+ .access_table = &x1830_access_table,
};
static const u32 x2000_pull_ups[5] = {
@@ -2969,6 +2995,17 @@ static const struct function_desc x2000_functions[] = {
{ "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), },
};
+static const struct regmap_range x2000_access_ranges[] = {
+ regmap_reg_range(0x000, 0x500 - 4),
+ regmap_reg_range(0x700, 0x800 - 4),
+};
+
+/* shared with X2100 */
+static const struct regmap_access_table x2000_access_table = {
+ .yes_ranges = x2000_access_ranges,
+ .n_yes_ranges = ARRAY_SIZE(x2000_access_ranges),
+};
+
static const struct ingenic_chip_info x2000_chip_info = {
.num_chips = 5,
.reg_offset = 0x100,
@@ -2979,6 +3016,7 @@ static const struct ingenic_chip_info x2000_chip_info = {
.num_functions = ARRAY_SIZE(x2000_functions),
.pull_ups = x2000_pull_ups,
.pull_downs = x2000_pull_downs,
+ .access_table = &x2000_access_table,
};
static const u32 x2100_pull_ups[5] = {
@@ -3189,6 +3227,7 @@ static const struct ingenic_chip_info x2100_chip_info = {
.num_functions = ARRAY_SIZE(x2100_functions),
.pull_ups = x2100_pull_ups,
.pull_downs = x2100_pull_downs,
+ .access_table = &x2000_access_table,
};
static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
@@ -4168,7 +4207,12 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
return PTR_ERR(base);
regmap_config = ingenic_pinctrl_regmap_config;
- regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset;
+ if (chip_info->access_table) {
+ regmap_config.rd_table = chip_info->access_table;
+ regmap_config.wr_table = chip_info->access_table;
+ } else {
+ regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset - 4;
+ }
jzpc->map = devm_regmap_init_mmio(dev, base, ®map_config);
if (IS_ERR(jzpc->map)) {
The X series Ingenic SoCs have a shadow GPIO group which is at a higher offset than the other groups, and is used for all GPIO configuration. The regmap did not take this offset into account and set max_register too low, so the regmap API blocked writes to the shadow group, which made the pinctrl driver unable to configure any pins. Fix this by adding regmap access tables to the chip info. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> --- v1 -> v2: use regmap_access_table v2 -> v3: compute max_register instead of putting it in chip_info drivers/pinctrl/pinctrl-ingenic.c | 46 ++++++++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-)