diff mbox series

[v9,3/3] mmc: mediatek: add support for SDIO eint wakup IRQ

Message ID 20220329032913.8750-4-axe.yang@mediatek.com
State New
Headers show
Series [v9,1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties | expand

Commit Message

Axe Yang March 29, 2022, 3:29 a.m. UTC
Add support for eint IRQ when MSDC is used as an SDIO host. This
feature requires SDIO device support async IRQ function. With this
feature, SDIO host can be awakened by SDIO card in suspend state,
without additional pin.

MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC
turn off clock and switch SDIO DAT1 pin to GPIO mode. And during
resume, switch GPIO function back to DAT1 mode then turn on clock.

Some device tree property should be added or modified in MSDC node
to support SDIO eint IRQ. Pinctrls "state_eint" is mandatory. Since
this feature depends on asynchronous interrupts, "wakeup-source",
"keep-power-in-suspend" and "cap-sdio-irq" flags are necessary, and
the interrupts list should be extended:
        &mmcX {
		...
		interrupts-extended = <...>,
                              	      <&pio xxx IRQ_TYPE_LEVEL_LOW>;
                ...
                pinctrl-names = "default", "state_uhs", "state_eint";
                ...
                pinctrl-2 = <&mmc2_pins_eint>;
                ...
                cap-sdio-irq;
		keep-power-in-suspend;
		wakeup-source;
                ...
        };

Co-developed-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 94 +++++++++++++++++++++++++++++++++++----
 1 file changed, 86 insertions(+), 8 deletions(-)

Comments

Chaotian Jing (井朝天) March 30, 2022, 8:30 a.m. UTC | #1
On Tue, 2022-03-29 at 11:29 +0800, Axe Yang wrote:
> Add support for eint IRQ when MSDC is used as an SDIO host. This
> feature requires SDIO device support async IRQ function. With this
> feature, SDIO host can be awakened by SDIO card in suspend state,
> without additional pin.
> 
> MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC
> turn off clock and switch SDIO DAT1 pin to GPIO mode. And during
> resume, switch GPIO function back to DAT1 mode then turn on clock.
> 
> Some device tree property should be added or modified in MSDC node
> to support SDIO eint IRQ. Pinctrls "state_eint" is mandatory. Since
> this feature depends on asynchronous interrupts, "wakeup-source",
> "keep-power-in-suspend" and "cap-sdio-irq" flags are necessary, and
> the interrupts list should be extended:
>         &mmcX {
> 		...
> 		interrupts-extended = <...>,
>                               	      <&pio xxx
> IRQ_TYPE_LEVEL_LOW>;
>                 ...
>                 pinctrl-names = "default", "state_uhs", "state_eint";
>                 ...
>                 pinctrl-2 = <&mmc2_pins_eint>;
>                 ...
>                 cap-sdio-irq;
> 		keep-power-in-suspend;
> 		wakeup-source;
>                 ...
>         };
> 
> Co-developed-by: Yong Mao <yong.mao@mediatek.com>
> Signed-off-by: Yong Mao <yong.mao@mediatek.com>
> Signed-off-by: Axe Yang <axe.yang@mediatek.com>
  Acked-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
>  drivers/mmc/host/mtk-sd.c | 94 +++++++++++++++++++++++++++++++++++
> ----
>  1 file changed, 86 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 65037e1d7723..2905d7134243 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -1,6 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
> - * Copyright (c) 2014-2015 MediaTek Inc.
> + * Copyright (c) 2014-2015, 2022 MediaTek Inc.
>   * Author: Chaotian.Jing <chaotian.jing@mediatek.com>
>   */
>  
> @@ -20,6 +20,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/pm.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/pm_wakeirq.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
>  #include <linux/spinlock.h>
> @@ -440,8 +441,11 @@ struct msdc_host {
>  	struct pinctrl *pinctrl;
>  	struct pinctrl_state *pins_default;
>  	struct pinctrl_state *pins_uhs;
> +	struct pinctrl_state *pins_eint;
>  	struct delayed_work req_timeout;
>  	int irq;		/* host interrupt */
> +	int eint_irq;		/* interrupt from sdio device for
> waking up system */
> +	int sdio_wake_irq_depth;
>  	struct reset_control *reset;
>  
>  	struct clk *src_clk;	/* msdc source clock */
> @@ -465,6 +469,7 @@ struct msdc_host {
>  	bool hs400_tuning;	/* hs400 mode online tuning */
>  	bool internal_cd;	/* Use internal card-detect logic */
>  	bool cqhci;		/* support eMMC hw cmdq */
> +	bool sdio_eint_ready;	/* Ready to support SDIO eint
> interrupt */
>  	struct msdc_save_para save_para; /* used when gate HCLK */
>  	struct msdc_tune_para def_tune_para; /* default tune setting */
>  	struct msdc_tune_para saved_tune_para; /* tune result of
> CMD21/CMD19 */
> @@ -1527,10 +1532,12 @@ static void msdc_enable_sdio_irq(struct
> mmc_host *mmc, int enb)
>  	__msdc_enable_sdio_irq(host, enb);
>  	spin_unlock_irqrestore(&host->lock, flags);
>  
> -	if (enb)
> -		pm_runtime_get_noresume(host->dev);
> -	else
> -		pm_runtime_put_noidle(host->dev);
> +	if (mmc->card && !mmc_card_enable_async_irq(mmc->card)) {
> +		if (enb)
> +			pm_runtime_get_noresume(host->dev);
> +		else
> +			pm_runtime_put_noidle(host->dev);
> +	}
>  }
>  
>  static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
> @@ -2631,6 +2638,18 @@ static int msdc_drv_probe(struct
> platform_device *pdev)
>  		goto host_free;
>  	}
>  
> +	/* Support for SDIO eint irq ? */
> +	if (mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ) {
> +		host->pins_eint = pinctrl_lookup_state(host->pinctrl,
> "state_eint");
> +		if (IS_ERR(host->pins_eint)) {
> +			ret = dev_err_probe(&pdev->dev, PTR_ERR(host-
> >pins_eint),
> +					    "Cannot find pinctrl
> eint!\n");
> +			goto host_free;
> +		}
> +
> +		host->sdio_eint_ready = true;
> +	}
> +
>  	msdc_of_property_parse(pdev, host);
>  
>  	host->dev = &pdev->dev;
> @@ -2722,6 +2741,21 @@ static int msdc_drv_probe(struct
> platform_device *pdev)
>  	if (ret)
>  		goto release;
>  
> +	if (host->sdio_eint_ready) {
> +		host->eint_irq = irq_of_parse_and_map(host->dev-
> >of_node, 1);
> +		ret = host->eint_irq ?
> dev_pm_set_dedicated_wake_irq(host->dev, host->eint_irq) :
> +		      -ENODEV;
> +
> +		if (ret) {
> +			dev_err(host->dev, "Failed to register data1
> eint irq!\n");
> +			goto release;
> +		}
> +
> +		dev_pm_disable_wake_irq(host->dev);
> +		pinctrl_select_state(host->pinctrl, host->pins_uhs);
> +	}
> +
> +	device_init_wakeup(host->dev, true);
>  	pm_runtime_set_active(host->dev);
>  	pm_runtime_set_autosuspend_delay(host->dev,
> MTK_MMC_AUTOSUSPEND_DELAY);
>  	pm_runtime_use_autosuspend(host->dev);
> @@ -2734,6 +2768,7 @@ static int msdc_drv_probe(struct
> platform_device *pdev)
>  	return 0;
>  end:
>  	pm_runtime_disable(host->dev);
> +	dev_pm_clear_wake_irq(host->dev);
>  release:
>  	platform_set_drvdata(pdev, NULL);
>  	msdc_deinit_hw(host);
> @@ -2845,6 +2880,16 @@ static int __maybe_unused
> msdc_runtime_suspend(struct device *dev)
>  	struct msdc_host *host = mmc_priv(mmc);
>  
>  	msdc_save_reg(host);
> +
> +	if (host->sdio_eint_ready) {
> +		disable_irq(host->irq);
> +		pinctrl_select_state(host->pinctrl, host->pins_eint);
> +		if (host->sdio_wake_irq_depth == 0) {
> +			dev_pm_enable_wake_irq(dev);
> +			host->sdio_wake_irq_depth++;
> +		}
> +		sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> +	}
>  	msdc_gate_clock(host);
>  	return 0;
>  }
> @@ -2860,12 +2905,25 @@ static int __maybe_unused
> msdc_runtime_resume(struct device *dev)
>  		return ret;
>  
>  	msdc_restore_reg(host);
> +
> +	if (host->sdio_eint_ready) {
> +		if (host->sdio_wake_irq_depth > 0) {
> +			dev_pm_disable_wake_irq(dev);
> +			host->sdio_wake_irq_depth--;
> +			sdr_set_bits(host->base + SDC_CFG,
> SDC_CFG_SDIOIDE);
> +		} else {
> +			sdr_clr_bits(host->base + MSDC_INTEN,
> MSDC_INTEN_SDIOIRQ);
> +		}
> +		pinctrl_select_state(host->pinctrl, host->pins_uhs);
> +		enable_irq(host->irq);
> +	}
>  	return 0;
>  }
>  
> -static int __maybe_unused msdc_suspend(struct device *dev)
> +static int __maybe_unused msdc_suspend_noirq(struct device *dev)
>  {
>  	struct mmc_host *mmc = dev_get_drvdata(dev);
> +	struct msdc_host *host = mmc_priv(mmc);
>  	int ret;
>  
>  	if (mmc->caps2 & MMC_CAP2_CQE) {
> @@ -2874,16 +2932,36 @@ static int __maybe_unused msdc_suspend(struct
> device *dev)
>  			return ret;
>  	}
>  
> +	if (host->sdio_eint_ready)
> +		enable_irq_wake(host->eint_irq);
> +
>  	return pm_runtime_force_suspend(dev);
>  }
>  
> -static int __maybe_unused msdc_resume(struct device *dev)
> +static int __maybe_unused msdc_resume_noirq(struct device *dev)
>  {
> +	struct mmc_host *mmc = dev_get_drvdata(dev);
> +	struct msdc_host *host = mmc_priv(mmc);
> +
> +	if (host->sdio_eint_ready) {
> +		disable_irq_wake(host->eint_irq);
> +
> +		/*
> +		 * In noirq resume stage, msdc_runtime_resume()
> +		 * won't be called, so disalbe wake irq here
> +		 * to block dedicated wake irq handler callback.
> +		 */
> +		if (likely(host->sdio_wake_irq_depth > 0)) {
> +			dev_pm_disable_wake_irq(dev);
> +			host->sdio_wake_irq_depth--;
> +		}
> +	}
> +
>  	return pm_runtime_force_resume(dev);
>  }
>  
>  static const struct dev_pm_ops msdc_dev_pm_ops = {
> -	SET_SYSTEM_SLEEP_PM_OPS(msdc_suspend, msdc_resume)
> +	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(msdc_suspend_noirq,
> msdc_resume_noirq)
>  	SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume,
> NULL)
>  };
>
Axe Yang May 19, 2022, 11:53 a.m. UTC | #2
On Mon, 2022-04-04 at 17:01 +0200, Ulf Hansson wrote:
> On Tue, 29 Mar 2022 at 05:29, Axe Yang <axe.yang@mediatek.com> wrote:
> > 
> > Add support for eint IRQ when MSDC is used as an SDIO host. This
> > feature requires SDIO device support async IRQ function. With this
> > feature, SDIO host can be awakened by SDIO card in suspend state,
> > without additional pin.
> > 
> > MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC
> > turn off clock and switch SDIO DAT1 pin to GPIO mode. And during
> > resume, switch GPIO function back to DAT1 mode then turn on clock.
> > 
> > Some device tree property should be added or modified in MSDC node
> > to support SDIO eint IRQ. Pinctrls "state_eint" is mandatory. Since
> > this feature depends on asynchronous interrupts, "wakeup-source",
> > "keep-power-in-suspend" and "cap-sdio-irq" flags are necessary, and
> > the interrupts list should be extended:
> >         &mmcX {
> >                 ...
> >                 interrupts-extended = <...>,
> >                                       <&pio xxx
> > IRQ_TYPE_LEVEL_LOW>;
> >                 ...
> >                 pinctrl-names = "default", "state_uhs",
> > "state_eint";
> >                 ...
> >                 pinctrl-2 = <&mmc2_pins_eint>;
> >                 ...
> >                 cap-sdio-irq;
> >                 keep-power-in-suspend;
> >                 wakeup-source;
> >                 ...
> >         };
> > 
> > Co-developed-by: Yong Mao <yong.mao@mediatek.com>
> > Signed-off-by: Yong Mao <yong.mao@mediatek.com>
> > Signed-off-by: Axe Yang <axe.yang@mediatek.com>
> > ---
> >  drivers/mmc/host/mtk-sd.c | 94
> > +++++++++++++++++++++++++++++++++++----
> >  1 file changed, 86 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > index 65037e1d7723..2905d7134243 100644
> > --- a/drivers/mmc/host/mtk-sd.c
> > +++ b/drivers/mmc/host/mtk-sd.c
> > @@ -1,6 +1,6 @@
> >  // SPDX-License-Identifier: GPL-2.0-only
> >  /*
> > - * Copyright (c) 2014-2015 MediaTek Inc.
> > + * Copyright (c) 2014-2015, 2022 MediaTek Inc.
> >   * Author: Chaotian.Jing <chaotian.jing@mediatek.com>
> >   */
> > 
> > @@ -20,6 +20,7 @@
> >  #include <linux/platform_device.h>
> >  #include <linux/pm.h>
> >  #include <linux/pm_runtime.h>
> > +#include <linux/pm_wakeirq.h>
> >  #include <linux/regulator/consumer.h>
> >  #include <linux/slab.h>
> >  #include <linux/spinlock.h>
> > @@ -440,8 +441,11 @@ struct msdc_host {
> >         struct pinctrl *pinctrl;
> >         struct pinctrl_state *pins_default;
> >         struct pinctrl_state *pins_uhs;
> > +       struct pinctrl_state *pins_eint;
> >         struct delayed_work req_timeout;
> >         int irq;                /* host interrupt */
> > +       int eint_irq;           /* interrupt from sdio device for
> > waking up system */
> > +       int sdio_wake_irq_depth;
> >         struct reset_control *reset;
> > 
> >         struct clk *src_clk;    /* msdc source clock */
> > @@ -465,6 +469,7 @@ struct msdc_host {
> >         bool hs400_tuning;      /* hs400 mode online tuning */
> >         bool internal_cd;       /* Use internal card-detect logic
> > */
> >         bool cqhci;             /* support eMMC hw cmdq */
> > +       bool sdio_eint_ready;   /* Ready to support SDIO eint
> > interrupt */
> >         struct msdc_save_para save_para; /* used when gate HCLK */
> >         struct msdc_tune_para def_tune_para; /* default tune
> > setting */
> >         struct msdc_tune_para saved_tune_para; /* tune result of
> > CMD21/CMD19 */
> > @@ -1527,10 +1532,12 @@ static void msdc_enable_sdio_irq(struct
> > mmc_host *mmc, int enb)
> >         __msdc_enable_sdio_irq(host, enb);
> >         spin_unlock_irqrestore(&host->lock, flags);
> > 
> > -       if (enb)
> > -               pm_runtime_get_noresume(host->dev);
> > -       else
> > -               pm_runtime_put_noidle(host->dev);
> > +       if (mmc->card && !mmc_card_enable_async_irq(mmc->card)) {
> 
> It might not be obvious, but in fact mmc->card always exists in this
> case, hence there is no need to check the pointer before using it.

this check is removed in v10.

> 
> > +               if (enb)
> > +                       pm_runtime_get_noresume(host->dev);
> > +               else
> > +                       pm_runtime_put_noidle(host->dev);
> > +       }
> >  }
> > 
> >  static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32
> > intsts)
> > @@ -2631,6 +2638,18 @@ static int msdc_drv_probe(struct
> > platform_device *pdev)
> >                 goto host_free;
> >         }
> > 
> > +       /* Support for SDIO eint irq ? */
> > +       if (mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ) {
> > +               host->pins_eint = pinctrl_lookup_state(host-
> > >pinctrl, "state_eint");
> > +               if (IS_ERR(host->pins_eint)) {
> > +                       ret = dev_err_probe(&pdev->dev,
> > PTR_ERR(host->pins_eint),
> > +                                           "Cannot find pinctrl
> > eint!\n");
> > +                       goto host_free;
> > +               }
> > +
> > +               host->sdio_eint_ready = true;
> 
> Rather than using a separate variable, couldn't we just check "if
> (host->pins_eint)" to know whether wakeup settings shall be managed?

This variable is removed in v10, use host->pins_eint instead. 

> 
> > +       }
> > +
> >         msdc_of_property_parse(pdev, host);
> > 
> >         host->dev = &pdev->dev;
> > @@ -2722,6 +2741,21 @@ static int msdc_drv_probe(struct
> > platform_device *pdev)
> >         if (ret)
> >                 goto release;
> > 
> > +       if (host->sdio_eint_ready) {
> > +               host->eint_irq = irq_of_parse_and_map(host->dev-
> > >of_node, 1);
> > +               ret = host->eint_irq ?
> > dev_pm_set_dedicated_wake_irq(host->dev, host->eint_irq) :
> > +                     -ENODEV;
> 
> I think it would make better sense to call
> dev_pm_set_dedicated_wake_irq() from msdc_enable_sdio_irq(). In this
> way, you can still support SDIO irqs, even if there are no GPIO irq
> for available for re-routing.
> 
> In other words, if the GPIO irq is available, then that's the best
> option and we should use that - otherwise we need to keep preventing
> runtime-suspend by bumping the runtime PM usage count.

dev_pm_set_dedicated_wake_irq() is replaced with
dev_pm_set_dedicated_wake_irq_reverse() to assure msdc irq is disabled
earlier than enable wake irq in rpm_suspend(), and it is moved to
msdc_enable_sdio_irq() phase.

> 
> > +
> > +               if (ret) {
> > +                       dev_err(host->dev, "Failed to register
> > data1 eint irq!\n");
> > +                       goto release;
> > +               }
> > +
> > +               dev_pm_disable_wake_irq(host->dev);
> > +               pinctrl_select_state(host->pinctrl, host-
> > >pins_uhs);
> > +       }
> > +
> > +       device_init_wakeup(host->dev, true);
> 
> I think this better belongs under the condition of whether
> MMC_PM_WAKE_SDIO_IRQ and MMC_PM_KEEP_POWER caps are set.

Both of them are checked before parsing eint pinstate in v10.

> 
> >         pm_runtime_set_active(host->dev);
> >         pm_runtime_set_autosuspend_delay(host->dev,
> > MTK_MMC_AUTOSUSPEND_DELAY);
> >         pm_runtime_use_autosuspend(host->dev);
> > @@ -2734,6 +2768,7 @@ static int msdc_drv_probe(struct
> > platform_device *pdev)
> >         return 0;
> >  end:
> >         pm_runtime_disable(host->dev);
> > +       dev_pm_clear_wake_irq(host->dev);
> >  release:
> >         platform_set_drvdata(pdev, NULL);
> >         msdc_deinit_hw(host);
> > @@ -2845,6 +2880,16 @@ static int __maybe_unused
> > msdc_runtime_suspend(struct device *dev)
> >         struct msdc_host *host = mmc_priv(mmc);
> > 
> >         msdc_save_reg(host);
> > +
> > +       if (host->sdio_eint_ready) {
> 
> The core provides a helper function, sdio_irq_claimed(), that can be
> used to know whether there is an SDIO irq registered. It looks like
> that certainly can be useful here.

Yes. We need sdio_irq_claimed() check since set dedicated wake irq is
been moved to claim irq stage.

> 
> > +               disable_irq(host->irq);
> > +               pinctrl_select_state(host->pinctrl, host-
> > >pins_eint);
> > +               if (host->sdio_wake_irq_depth == 0) {
> > +                       dev_pm_enable_wake_irq(dev);
> 
> This should be managed from the runtime PM core. See rpm_suspend().
> 
> Or perhaps there is a reason that doesn't work for you?
> 
> > +                       host->sdio_wake_irq_depth++;
> 
> Again, sdio_irq_claimed() is probably better to use.
> 
> > +               }
> > +               sdr_clr_bits(host->base + SDC_CFG,
> > SDC_CFG_SDIOIDE);
> > +       }
> >         msdc_gate_clock(host);
> >         return 0;
> >  }
> > @@ -2860,12 +2905,25 @@ static int __maybe_unused
> > msdc_runtime_resume(struct device *dev)
> >                 return ret;
> > 
> >         msdc_restore_reg(host);
> > +
> > +       if (host->sdio_eint_ready) {
> > +               if (host->sdio_wake_irq_depth > 0) {
> > +                       dev_pm_disable_wake_irq(dev);
> > +                       host->sdio_wake_irq_depth--;
> > +                       sdr_set_bits(host->base + SDC_CFG,
> > SDC_CFG_SDIOIDE);
> > +               } else {
> > +                       sdr_clr_bits(host->base + MSDC_INTEN,
> > MSDC_INTEN_SDIOIRQ);
> > +               }
> > +               pinctrl_select_state(host->pinctrl, host-
> > >pins_uhs);
> > +               enable_irq(host->irq);
> > +       }
> >         return 0;
> >  }
> > 
> > -static int __maybe_unused msdc_suspend(struct device *dev)
> > +static int __maybe_unused msdc_suspend_noirq(struct device *dev)
> >  {
> >         struct mmc_host *mmc = dev_get_drvdata(dev);
> > +       struct msdc_host *host = mmc_priv(mmc);
> >         int ret;
> > 
> >         if (mmc->caps2 & MMC_CAP2_CQE) {
> > @@ -2874,16 +2932,36 @@ static int __maybe_unused
> > msdc_suspend(struct device *dev)
> >                         return ret;
> >         }
> > 
> > +       if (host->sdio_eint_ready)
> > +               enable_irq_wake(host->eint_irq);
> 
> The PM core should manage this for us through dpm_suspend_noirq(), I
> think. We just need to make sure that the runtime PM status of the
> device has been set to RPM_SUSPENDED before dpm_suspend_noirq()  gets
> called. Have a look at dpm_suspend_noirq() ->
> device_wakeup_arm_wake_irqs() -> dev_pm_arm_wake_irq().
> 
> In other words (and unless I am missing something), if we continue to
> call pm_runtime_force_suspend() from a ->suspend() callback this
> should work just fine.

This part is simplified in v10. dpm/rpm system can manage wake irq
well.

> 
> > +
> >         return pm_runtime_force_suspend(dev);
> >  }
> > 
> > -static int __maybe_unused msdc_resume(struct device *dev)
> > +static int __maybe_unused msdc_resume_noirq(struct device *dev)
> >  {
> > +       struct mmc_host *mmc = dev_get_drvdata(dev);
> > +       struct msdc_host *host = mmc_priv(mmc);
> > +
> > +       if (host->sdio_eint_ready) {
> > +               disable_irq_wake(host->eint_irq);
> > +
> > +               /*
> > +                * In noirq resume stage, msdc_runtime_resume()
> > +                * won't be called, so disalbe wake irq here
> > +                * to block dedicated wake irq handler callback.
> > +                */
> > +               if (likely(host->sdio_wake_irq_depth > 0)) {
> > +                       dev_pm_disable_wake_irq(dev);
> > +                       host->sdio_wake_irq_depth--;
> > +               }
> 
> Similar comment as from the system suspend case. I don't think we
> need
> to move to the noirq phase.
> 
> Or maybe I am missing something here?

They are restored to system suspend stage in V10.
But I have to use rpm_suspend()/rpm_resueme() instead of 
pm_runtime_force_suspend()/pm_runtime_force_resmue(). 
pm_runtime_force_resume() will go out directly because rpm state is
RPM_SUSPENDED in system resume stage.

> 
> > +       }
> > +
> >         return pm_runtime_force_resume(dev);
> >  }
> > 
> >  static const struct dev_pm_ops msdc_dev_pm_ops = {
> > -       SET_SYSTEM_SLEEP_PM_OPS(msdc_suspend, msdc_resume)
> > +       SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(msdc_suspend_noirq,
> > msdc_resume_noirq)
> >         SET_RUNTIME_PM_OPS(msdc_runtime_suspend,
> > msdc_runtime_resume, NULL)
> >  };
> > 
> > --
> > 2.25.1
> > 
> 

Regards,
Axe
diff mbox series

Patch

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 65037e1d7723..2905d7134243 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2014-2015 MediaTek Inc.
+ * Copyright (c) 2014-2015, 2022 MediaTek Inc.
  * Author: Chaotian.Jing <chaotian.jing@mediatek.com>
  */
 
@@ -20,6 +20,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -440,8 +441,11 @@  struct msdc_host {
 	struct pinctrl *pinctrl;
 	struct pinctrl_state *pins_default;
 	struct pinctrl_state *pins_uhs;
+	struct pinctrl_state *pins_eint;
 	struct delayed_work req_timeout;
 	int irq;		/* host interrupt */
+	int eint_irq;		/* interrupt from sdio device for waking up system */
+	int sdio_wake_irq_depth;
 	struct reset_control *reset;
 
 	struct clk *src_clk;	/* msdc source clock */
@@ -465,6 +469,7 @@  struct msdc_host {
 	bool hs400_tuning;	/* hs400 mode online tuning */
 	bool internal_cd;	/* Use internal card-detect logic */
 	bool cqhci;		/* support eMMC hw cmdq */
+	bool sdio_eint_ready;	/* Ready to support SDIO eint interrupt */
 	struct msdc_save_para save_para; /* used when gate HCLK */
 	struct msdc_tune_para def_tune_para; /* default tune setting */
 	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
@@ -1527,10 +1532,12 @@  static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
 	__msdc_enable_sdio_irq(host, enb);
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	if (enb)
-		pm_runtime_get_noresume(host->dev);
-	else
-		pm_runtime_put_noidle(host->dev);
+	if (mmc->card && !mmc_card_enable_async_irq(mmc->card)) {
+		if (enb)
+			pm_runtime_get_noresume(host->dev);
+		else
+			pm_runtime_put_noidle(host->dev);
+	}
 }
 
 static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
@@ -2631,6 +2638,18 @@  static int msdc_drv_probe(struct platform_device *pdev)
 		goto host_free;
 	}
 
+	/* Support for SDIO eint irq ? */
+	if (mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ) {
+		host->pins_eint = pinctrl_lookup_state(host->pinctrl, "state_eint");
+		if (IS_ERR(host->pins_eint)) {
+			ret = dev_err_probe(&pdev->dev, PTR_ERR(host->pins_eint),
+					    "Cannot find pinctrl eint!\n");
+			goto host_free;
+		}
+
+		host->sdio_eint_ready = true;
+	}
+
 	msdc_of_property_parse(pdev, host);
 
 	host->dev = &pdev->dev;
@@ -2722,6 +2741,21 @@  static int msdc_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto release;
 
+	if (host->sdio_eint_ready) {
+		host->eint_irq = irq_of_parse_and_map(host->dev->of_node, 1);
+		ret = host->eint_irq ? dev_pm_set_dedicated_wake_irq(host->dev, host->eint_irq) :
+		      -ENODEV;
+
+		if (ret) {
+			dev_err(host->dev, "Failed to register data1 eint irq!\n");
+			goto release;
+		}
+
+		dev_pm_disable_wake_irq(host->dev);
+		pinctrl_select_state(host->pinctrl, host->pins_uhs);
+	}
+
+	device_init_wakeup(host->dev, true);
 	pm_runtime_set_active(host->dev);
 	pm_runtime_set_autosuspend_delay(host->dev, MTK_MMC_AUTOSUSPEND_DELAY);
 	pm_runtime_use_autosuspend(host->dev);
@@ -2734,6 +2768,7 @@  static int msdc_drv_probe(struct platform_device *pdev)
 	return 0;
 end:
 	pm_runtime_disable(host->dev);
+	dev_pm_clear_wake_irq(host->dev);
 release:
 	platform_set_drvdata(pdev, NULL);
 	msdc_deinit_hw(host);
@@ -2845,6 +2880,16 @@  static int __maybe_unused msdc_runtime_suspend(struct device *dev)
 	struct msdc_host *host = mmc_priv(mmc);
 
 	msdc_save_reg(host);
+
+	if (host->sdio_eint_ready) {
+		disable_irq(host->irq);
+		pinctrl_select_state(host->pinctrl, host->pins_eint);
+		if (host->sdio_wake_irq_depth == 0) {
+			dev_pm_enable_wake_irq(dev);
+			host->sdio_wake_irq_depth++;
+		}
+		sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+	}
 	msdc_gate_clock(host);
 	return 0;
 }
@@ -2860,12 +2905,25 @@  static int __maybe_unused msdc_runtime_resume(struct device *dev)
 		return ret;
 
 	msdc_restore_reg(host);
+
+	if (host->sdio_eint_ready) {
+		if (host->sdio_wake_irq_depth > 0) {
+			dev_pm_disable_wake_irq(dev);
+			host->sdio_wake_irq_depth--;
+			sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+		} else {
+			sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
+		}
+		pinctrl_select_state(host->pinctrl, host->pins_uhs);
+		enable_irq(host->irq);
+	}
 	return 0;
 }
 
-static int __maybe_unused msdc_suspend(struct device *dev)
+static int __maybe_unused msdc_suspend_noirq(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct msdc_host *host = mmc_priv(mmc);
 	int ret;
 
 	if (mmc->caps2 & MMC_CAP2_CQE) {
@@ -2874,16 +2932,36 @@  static int __maybe_unused msdc_suspend(struct device *dev)
 			return ret;
 	}
 
+	if (host->sdio_eint_ready)
+		enable_irq_wake(host->eint_irq);
+
 	return pm_runtime_force_suspend(dev);
 }
 
-static int __maybe_unused msdc_resume(struct device *dev)
+static int __maybe_unused msdc_resume_noirq(struct device *dev)
 {
+	struct mmc_host *mmc = dev_get_drvdata(dev);
+	struct msdc_host *host = mmc_priv(mmc);
+
+	if (host->sdio_eint_ready) {
+		disable_irq_wake(host->eint_irq);
+
+		/*
+		 * In noirq resume stage, msdc_runtime_resume()
+		 * won't be called, so disalbe wake irq here
+		 * to block dedicated wake irq handler callback.
+		 */
+		if (likely(host->sdio_wake_irq_depth > 0)) {
+			dev_pm_disable_wake_irq(dev);
+			host->sdio_wake_irq_depth--;
+		}
+	}
+
 	return pm_runtime_force_resume(dev);
 }
 
 static const struct dev_pm_ops msdc_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(msdc_suspend, msdc_resume)
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(msdc_suspend_noirq, msdc_resume_noirq)
 	SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
 };