diff mbox series

[v4,8/9] serial: 8250: dw: Improve RZN1 support

Message ID 20220330132038.808679-9-miquel.raynal@bootlin.com
State New
Headers show
Series [v4,1/9] serial: 8250: dw: Move definitions to the shared header | expand

Commit Message

Miquel Raynal March 30, 2022, 1:20 p.m. UTC 
From: Phil Edworthy <phil.edworthy@renesas.com>

Renesas RZ/N1 SoC features a slightly modified DW UART.

On this SoC, the CPR register value is known but not synthetized in
hardware. We hence need to provide a CPR value in the platform
data. This version of the controller also relies on acting as flow
controller when using DMA, so we need to provide the
"is dma flow controller" quirk.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/tty/serial/8250/8250_dw.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 977a473535e8..195aa4516b2b 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -755,7 +755,10 @@  static const struct dw8250_platform_data dw8250_armada_38x_data = {
 	.quirks = DW_UART_QUIRK_ARMADA_38X,
 };
 
-static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {};
+static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
+	.quirks = DW_UART_QUIRK_IS_DMA_FC,
+	.cpr = 0x00012f32,
+};
 
 static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
 	.quirks = DW_UART_QUIRK_SKIP_SET_RATE,