diff mbox series

[v2] bus: mhi: host: pci_generic: Add missing poweroff() PM callback

Message ID 20220405125907.5644-1-manivannan.sadhasivam@linaro.org
State Accepted
Commit e64d5fa5044f225ac87d96a7e4be11389999c4c6
Headers show
Series [v2] bus: mhi: host: pci_generic: Add missing poweroff() PM callback | expand

Commit Message

Manivannan Sadhasivam April 5, 2022, 12:59 p.m. UTC
During hibernation process, once thaw() stage completes, the MHI endpoint
devices will be in M0 state post recovery. After that, the devices will be
powered down so that the system can enter the target sleep state. During
this stage, the PCI core will put the devices in D3hot. But this transition
is allowed by the MHI spec. The devices can only enter D3hot when it is in
M3 state.

So for fixing this issue, let's add the poweroff() callback that will get
executed before putting the system in target sleep state during
hibernation. This callback will power down the device properly so that it
could be restored during restore() or thaw() stage.

Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Hemant Kumar <quic_hemantk@quicinc.com>
Suggested-by: Hemant Kumar <quic_hemantk@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---

Changes in v2:

* Hemant suggested to use restore function for poweroff() callback as we can
make sure that the device gets powered down properly.

 drivers/bus/mhi/host/pci_generic.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Manivannan Sadhasivam April 7, 2022, 2 p.m. UTC | #1
On Tue, Apr 05, 2022 at 01:23:22PM -0700, Bhaumik Vasav Bhatt wrote:
> 
> On 4/5/2022 5:59 AM, Manivannan Sadhasivam wrote:
> > During hibernation process, once thaw() stage completes, the MHI endpoint
> > devices will be in M0 state post recovery. After that, the devices will be
> > powered down so that the system can enter the target sleep state. During
> > this stage, the PCI core will put the devices in D3hot. But this transition
> > is allowed by the MHI spec. The devices can only enter D3hot when it is in
> > M3 state.
> > 
> > So for fixing this issue, let's add the poweroff() callback that will get
> > executed before putting the system in target sleep state during
> > hibernation. This callback will power down the device properly so that it
> > could be restored during restore() or thaw() stage.
> > 
> > Cc: stable@vger.kernel.org
> > Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
> > Reported-by: Hemant Kumar <quic_hemantk@quicinc.com>
> > Suggested-by: Hemant Kumar <quic_hemantk@quicinc.com>
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> > 
> > Changes in v2:
> > 
> > * Hemant suggested to use restore function for poweroff() callback as we can
> > make sure that the device gets powered down properly.
> > 
> >   drivers/bus/mhi/host/pci_generic.c | 1 +
> >   1 file changed, 1 insertion(+)
> > 
> > diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> > index 9527b7d63840..ef85dbfb3216 100644
> > --- a/drivers/bus/mhi/host/pci_generic.c
> > +++ b/drivers/bus/mhi/host/pci_generic.c
> > @@ -1085,6 +1085,7 @@ static const struct dev_pm_ops mhi_pci_pm_ops = {
> >   	.resume = mhi_pci_resume,
> >   	.freeze = mhi_pci_freeze,
> >   	.thaw = mhi_pci_restore,
> > +	.poweroff = mhi_pci_freeze,
> 
> It is possible that .thaw() queues recovery work and recovery work is still
> running
> 
> while .poweroff() is called. I would suggest adding a flush_work() in freeze
> such that
> 
> we don't try to power off while we're also trying to power on MHI from
> recovery work.
> 

These two cannot run in parallel because the power down will only happen if the
MHI_PCI_DEV_STARTED bit is set in mhi_pdev->status and that's the last step of
recovery. But the real issue I found is, if the recovery didn't finish during
powerdown() stage, then the function will just return and the device might be
powered on later.

So to avoid this scenario, we should have the flush_workqueue() in freeze.

I'll submit a different patch for that.

Thanks,
Mani

> >   	.restore = mhi_pci_restore,
> >   #endif
> >   };
diff mbox series

Patch

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 9527b7d63840..ef85dbfb3216 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -1085,6 +1085,7 @@  static const struct dev_pm_ops mhi_pci_pm_ops = {
 	.resume = mhi_pci_resume,
 	.freeze = mhi_pci_freeze,
 	.thaw = mhi_pci_restore,
+	.poweroff = mhi_pci_freeze,
 	.restore = mhi_pci_restore,
 #endif
 };