@@ -89,12 +89,12 @@ touchscreen@0 {
pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <125>;
- touchscreen-size-x = /bits/ 16 <4008>;
+ touchscreen-size-x = <4008>;
ti,y-min = /bits/ 16 <282>;
- touchscreen-size-y = /bits/ 16 <3864>;
+ touchscreen-size-y = <3864>;
ti,x-plate-ohms = /bits/ 16 <180>;
- touchscreen-max-pressure = /bits/ 16 <255>;
- touchscreen-average-samples = /bits/ 16 <10>;
+ touchscreen-max-pressure = <255>;
+ touchscreen-average-samples = <10>;
ti,debounce-tol = /bits/ 16 <3>;
ti,debounce-rep = /bits/ 16 <1>;
ti,settle-delay-usec = /bits/ 16 <150>;
@@ -70,12 +70,12 @@ touchscreen@0 {
pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <125>;
- touchscreen-size-x = /bits/ 16 <4008>;
+ touchscreen-size-x = <4008>;
ti,y-min = /bits/ 16 <282>;
- touchscreen-size-y = /bits/ 16 <3864>;
+ touchscreen-size-y = <3864>;
ti,x-plate-ohms = /bits/ 16 <180>;
- touchscreen-max-pressure = /bits/ 16 <255>;
- touchscreen-average-samples = /bits/ 16 <10>;
+ touchscreen-max-pressure = <255>;
+ touchscreen-average-samples = <10>;
ti,debounce-tol = /bits/ 16 <3>;
ti,debounce-rep = /bits/ 16 <1>;
ti,settle-delay-usec = /bits/ 16 <150>;
The common touchscreen properties are all 32-bit, not 16-bit. These properties must not be too important as they are all ignored in case of an error reading them. Signed-off-by: Rob Herring <robh@kernel.org> --- Can someone apply this for 5.18. arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi | 8 ++++---- arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-)