| Message ID | 20220406233648.21644-12-brad@pensando.io |
|---|---|
| State | New |
| Headers | show |
| Series | Support Pensando Elba SoC | expand |
On 2022-04-07 00:36, Brad Larson wrote: > Add Pensando common and Elba SoC specific device nodes > > Signed-off-by: Brad Larson <brad@pensando.io> > --- > Change from V3: > - Changed to dual copyright (GPL-2.0+ OR MIT) > - Minor changes from review input > > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/pensando/Makefile | 3 + > arch/arm64/boot/dts/pensando/elba-16core.dtsi | 189 ++++++++++++++++++ > .../boot/dts/pensando/elba-asic-common.dtsi | 98 +++++++++ > arch/arm64/boot/dts/pensando/elba-asic.dts | 28 +++ > .../boot/dts/pensando/elba-flash-parts.dtsi | 106 ++++++++++ > arch/arm64/boot/dts/pensando/elba.dtsi | 189 ++++++++++++++++++ > 7 files changed, 614 insertions(+) > create mode 100644 arch/arm64/boot/dts/pensando/Makefile > create mode 100644 arch/arm64/boot/dts/pensando/elba-16core.dtsi > create mode 100644 arch/arm64/boot/dts/pensando/elba-asic-common.dtsi > create mode 100644 arch/arm64/boot/dts/pensando/elba-asic.dts > create mode 100644 arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi > create mode 100644 arch/arm64/boot/dts/pensando/elba.dtsi > [...] > diff --git a/arch/arm64/boot/dts/pensando/elba.dtsi > b/arch/arm64/boot/dts/pensando/elba.dtsi > new file mode 100644 > index 000000000000..10e06eb8cda6 > --- /dev/null > +++ b/arch/arm64/boot/dts/pensando/elba.dtsi [...] > + gic: interrupt-controller@800000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + interrupt-controller; > + reg = <0x0 0x800000 0x0 0x200000>, /* GICD */ > + <0x0 0xa00000 0x0 0x200000>; /* GICR */ You are still missing the GICV and GICH regions that are provided by the CPU. I already pointed that out in [1]. The Cortex-A72 TRM will tell you where to find them (at an offset from PERIPHBASE). Please fix this. M. [1] https://lore.kernel.org/all/a20805de16e1196c2ed46dd949473c9a@kernel.org
On 07/04/2022 01:36, Brad Larson wrote: > Add Pensando common and Elba SoC specific device nodes > > Signed-off-by: Brad Larson <brad@pensando.io> > --- > Change from V3: > - Changed to dual copyright (GPL-2.0+ OR MIT) > - Minor changes from review input Thank you for your patch. There is something to discuss/improve. (...) > +&i2c0 { > + clock-frequency = <100000>; > + status = "okay"; > + rtc@51 { > + compatible = "nxp,pcf85263"; > + reg = <0x51>; > + }; > +}; > + > +&spi0 { > + num-cs = <4>; > + cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>, > + <&porta 7 GPIO_ACTIVE_LOW>; > + status = "okay"; > + spi0_cs0@0 { Generic node name needed matching the class of a devicxe. > + compatible = "semtech,sx1301"; /* Enable spidev */ This comment is a bit odd... did you just use random compatible from spidev instead of defining proper compatible? > + #address-cells = <1>; > + #size-cells = <1>; Why address/size cells? > + spi-max-frequency = <12000000>; > + reg = <0>; Please put reg just after compatible. It's the most common pattern. > + }; > + > + spi0_cs1@1 { > + compatible = "semtech,sx1301"; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <1>; > + }; > + (...) > + > + emmc: mmc@30440000 { > + compatible = "pensando,elba-sd4hc", "cdns,sd4hc"; > + clocks = <&emmc_clk>; > + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0 0x30440000 0x0 0x10000>, > + <0x0 0x30480044 0x0 0x4>; /* byte-lane ctrl */ > + cdns,phy-input-delay-sd-highspeed = <0x4>; > + cdns,phy-input-delay-legacy = <0x4>; > + cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>; > + cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>; > + mmc-ddr-1_8v; > + status = "disabled"; > + }; > + > + mssoc: mssoc@307c0000 { Generic node name. > + compatible = "syscon", "simple-mfd"; This does not look correct. Syscon is okay, but why do you need simple-mfd (there are no children here)? > + reg = <0x0 0x307c0000 0x0 0x3000>; > + }; > + }; > +}; Best regards, Krzysztof
On 07/04/2022 01:36, Brad Larson wrote: > Add Pensando common and Elba SoC specific device nodes > > Signed-off-by: Brad Larson <brad@pensando.io> > --- > Change from V3: > - Changed to dual copyright (GPL-2.0+ OR MIT) > - Minor changes from review input Thank you for your patch. There is something to discuss/improve. (...) > +&i2c0 { > + clock-frequency = <100000>; > + status = "okay"; > + rtc@51 { > + compatible = "nxp,pcf85263"; > + reg = <0x51>; > + }; > +}; > + > +&spi0 { > + num-cs = <4>; > + cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>, > + <&porta 7 GPIO_ACTIVE_LOW>; > + status = "okay"; > + spi0_cs0@0 { Generic node name needed matching the class of a devicxe. > + compatible = "semtech,sx1301"; /* Enable spidev */ This comment is a bit odd... did you just use random compatible from spidev instead of defining proper compatible? > + #address-cells = <1>; > + #size-cells = <1>; Why address/size cells? > + spi-max-frequency = <12000000>; > + reg = <0>; Please put reg just after compatible. It's the most common pattern. > + }; > + > + spi0_cs1@1 { > + compatible = "semtech,sx1301"; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <1>; > + }; > + (...) > + > + emmc: mmc@30440000 { > + compatible = "pensando,elba-sd4hc", "cdns,sd4hc"; > + clocks = <&emmc_clk>; > + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0 0x30440000 0x0 0x10000>, > + <0x0 0x30480044 0x0 0x4>; /* byte-lane ctrl */ > + cdns,phy-input-delay-sd-highspeed = <0x4>; > + cdns,phy-input-delay-legacy = <0x4>; > + cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>; > + cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>; > + mmc-ddr-1_8v; > + status = "disabled"; > + }; > + > + mssoc: mssoc@307c0000 { Generic node name. > + compatible = "syscon", "simple-mfd"; This does not look correct. Syscon is okay, but why do you need simple-mfd (there are no children here)? > + reg = <0x0 0x307c0000 0x0 0x3000>; > + }; > + }; > +}; Best regards, Krzysztof
On Thu, Apr 7, 2022 at 12:57 AM Marc Zyngier <maz@kernel.org> wrote: > > > + gic: interrupt-controller@800000 { > > + compatible = "arm,gic-v3"; > > + #interrupt-cells = <3>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + interrupt-controller; > > + reg = <0x0 0x800000 0x0 0x200000>, /* GICD */ > > + <0x0 0xa00000 0x0 0x200000>; /* GICR */ > > You are still missing the GICV and GICH regions that are > provided by the CPU. I already pointed that out in [1]. > > The Cortex-A72 TRM will tell you where to find them (at > an offset from PERIPHBASE). Hi Marc, Got the addresses, neither region is used, and will be included in the next submission. Best, Brad
On Sat, 09 Apr 2022 03:38:55 +0100, Brad Larson <brad@pensando.io> wrote: > > On Thu, Apr 7, 2022 at 12:57 AM Marc Zyngier <maz@kernel.org> wrote: > > > > > + gic: interrupt-controller@800000 { > > > + compatible = "arm,gic-v3"; > > > + #interrupt-cells = <3>; > > > + #address-cells = <2>; > > > + #size-cells = <2>; > > > + ranges; > > > + interrupt-controller; > > > + reg = <0x0 0x800000 0x0 0x200000>, /* GICD */ > > > + <0x0 0xa00000 0x0 0x200000>; /* GICR */ > > > > You are still missing the GICV and GICH regions that are > > provided by the CPU. I already pointed that out in [1]. > > > > The Cortex-A72 TRM will tell you where to find them (at > > an offset from PERIPHBASE). > > Hi Marc, > > Got the addresses, neither region is used, and will be included in the > next submission. Not sure what you mean by these regions being unused here (the Linux kernel definitely makes use of them). Note that you'll also need to add GICC (which I forgot to mention above). M.
On Wed, Apr 06, 2022 at 04:36:48PM -0700, Brad Larson wrote: > Add Pensando common and Elba SoC specific device nodes > > Signed-off-by: Brad Larson <brad@pensando.io> > --- > Change from V3: > - Changed to dual copyright (GPL-2.0+ OR MIT) > - Minor changes from review input > > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/pensando/Makefile | 3 + > arch/arm64/boot/dts/pensando/elba-16core.dtsi | 189 ++++++++++++++++++ > .../boot/dts/pensando/elba-asic-common.dtsi | 98 +++++++++ > arch/arm64/boot/dts/pensando/elba-asic.dts | 28 +++ > .../boot/dts/pensando/elba-flash-parts.dtsi | 106 ++++++++++ > arch/arm64/boot/dts/pensando/elba.dtsi | 189 ++++++++++++++++++ > 7 files changed, 614 insertions(+) > create mode 100644 arch/arm64/boot/dts/pensando/Makefile > create mode 100644 arch/arm64/boot/dts/pensando/elba-16core.dtsi > create mode 100644 arch/arm64/boot/dts/pensando/elba-asic-common.dtsi > create mode 100644 arch/arm64/boot/dts/pensando/elba-asic.dts > create mode 100644 arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi > create mode 100644 arch/arm64/boot/dts/pensando/elba.dtsi > [...] > diff --git a/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi > new file mode 100644 > index 000000000000..7a89df68fdf7 > --- /dev/null > +++ b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi > @@ -0,0 +1,98 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020-2022, Pensando Systems Inc. > + */ > + > +&ahb_clk { > + clock-frequency = <400000000>; > +}; > + > +&emmc_clk { > + clock-frequency = <200000000>; > +}; > + > +&flash_clk { > + clock-frequency = <400000000>; > +}; > + > +&ref_clk { > + clock-frequency = <156250000>; > +}; > + > +&qspi { > + status = "okay"; > + flash0: flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <40000000>; > + spi-rx-bus-width = <2>; > + m25p,fast-read; > + cdns,read-delay = <0>; > + cdns,tshsl-ns = <0>; > + cdns,tsd2d-ns = <0>; > + cdns,tchsh-ns = <0>; > + cdns,tslch-ns = <0>; > + }; > +}; > + > +&gpio0 { > + status = "okay"; > +}; > + > +&emmc { > + bus-width = <8>; > + status = "okay"; > +}; > + > +&wdt0 { > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <100000>; > + status = "okay"; > + rtc@51 { > + compatible = "nxp,pcf85263"; > + reg = <0x51>; > + }; > +}; > + > +&spi0 { > + num-cs = <4>; > + cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>, > + <&porta 7 GPIO_ACTIVE_LOW>; > + status = "okay"; > + spi0_cs0@0 { > + compatible = "semtech,sx1301"; /* Enable spidev */ > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <0>; > + }; > + > + spi0_cs1@1 { > + compatible = "semtech,sx1301"; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <1>; > + }; > + > + spi0_cs2@2 { > + compatible = "semtech,sx1301"; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <2>; > + interrupt-parent = <&porta>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + spi0_cs3@3 { > + compatible = "semtech,sx1301"; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <3>; > + }; > +}; [...] > diff --git a/arch/arm64/boot/dts/pensando/elba.dtsi b/arch/arm64/boot/dts/pensando/elba.dtsi > new file mode 100644 > index 000000000000..10e06eb8cda6 > --- /dev/null > +++ b/arch/arm64/boot/dts/pensando/elba.dtsi > @@ -0,0 +1,189 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020-2022, Pensando Systems Inc. > + */ > + > +#include <dt-bindings/gpio/gpio.h> > +#include "dt-bindings/interrupt-controller/arm-gic.h" > + > +/ { > + model = "Elba ASIC Board"; > + compatible = "pensando,elba"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + dma-coherent; > + > + ahb_clk: oscillator0 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + > + emmc_clk: oscillator2 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + > + flash_clk: oscillator3 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + > + ref_clk: oscillator4 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + > + psci { > + compatible = "arm,psci-0.2"; > + method = "smc"; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + pmu { > + compatible = "arm,cortex-a72-pmu"; > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + i2c0: i2c@400 { > + compatible = "snps,designware-i2c"; > + reg = <0x0 0x400 0x0 0x100>; > + clocks = <&ahb_clk>; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-sda-hold-time-ns = <480>; > + snps,sda-timeout-ms = <750>; > + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + wdt0: watchdog@1400 { > + compatible = "snps,dw-wdt"; > + reg = <0x0 0x1400 0x0 0x100>; > + clocks = <&ahb_clk>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + qspi: spi@2400 { > + compatible = "pensando,elba-qspi", "cdns,qspi-nor"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0 0x2400 0x0 0x400>, > + <0x0 0x7fff0000 0x0 0x1000>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&flash_clk>; > + cdns,fifo-depth = <1024>; > + cdns,fifo-width = <4>; > + cdns,trigger-address = <0x7fff0000>; > + status = "disabled"; > + }; > + > + spi0: spi@2800 { > + compatible = "pensando,elba-spi"; > + reg = <0x0 0x2800 0x0 0x100>; > + pensando,syscon-spics = <&mssoc 0x2468>; I am wondering do you really need to define the "pensando,syscon-spics" property as accepting a phandle with an additional argument? That would have been justified if you had at least two SPI controllers with different CS override registers. AFAICS you've got only one here. So you can simplify the bindings by defining the property like "pensando,syscon" (with no "spics" suffix) which accepts the syscon phandle alone. Respective SPICS offset can be locally declared in the driver as a macro with respective name. -Sergey > + clocks = <&ahb_clk>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + num-cs = <2>; > + status = "disabled"; > + }; > + > + gpio0: gpio@4000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dw-apb-gpio"; > + reg = <0x0 0x4000 0x0 0x78>; > + status = "disabled"; > + > + porta: gpio-port@0 { > + compatible = "snps,dw-apb-gpio-port"; > + reg = <0>; > + gpio-controller; > + #gpio-cells = <2>; > + ngpios = <8>; > + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + interrupt-parent = <&gic>; > + #interrupt-cells = <2>; > + }; > + > + portb: gpio-port@1 { > + compatible = "snps,dw-apb-gpio-port"; > + reg = <1>; > + gpio-controller; > + #gpio-cells = <2>; > + ngpios = <8>; > + }; > + }; > + > + uart0: serial@4800 { > + compatible = "ns16550a"; > + reg = <0x0 0x4800 0x0 0x100>; > + clocks = <&ref_clk>; > + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; > + reg-shift = <2>; > + reg-io-width = <4>; > + }; > + > + gic: interrupt-controller@800000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + interrupt-controller; > + reg = <0x0 0x800000 0x0 0x200000>, /* GICD */ > + <0x0 0xa00000 0x0 0x200000>; /* GICR */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + > + /* > + * Elba specific pre-ITS is enabled using the > + * existing property socionext,synquacer-pre-its > + */ > + gic_its: msi-controller@820000 { > + compatible = "arm,gic-v3-its"; > + msi-controller; > + #msi-cells = <1>; > + reg = <0x0 0x820000 0x0 0x10000>; > + socionext,synquacer-pre-its = > + <0xc00000 0x1000000>; > + }; > + }; > + > + emmc: mmc@30440000 { > + compatible = "pensando,elba-sd4hc", "cdns,sd4hc"; > + clocks = <&emmc_clk>; > + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x0 0x30440000 0x0 0x10000>, > + <0x0 0x30480044 0x0 0x4>; /* byte-lane ctrl */ > + cdns,phy-input-delay-sd-highspeed = <0x4>; > + cdns,phy-input-delay-legacy = <0x4>; > + cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>; > + cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>; > + mmc-ddr-1_8v; > + status = "disabled"; > + }; > + > + mssoc: mssoc@307c0000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0x0 0x307c0000 0x0 0x3000>; > + }; > + }; > +}; > -- > 2.17.1 >
Hi Sergey, On Tue, Apr 12, 2022 at 4:22 AM Serge Semin <fancer.lancer@gmail.com> wrote: > > On Wed, Apr 06, 2022 at 04:36:48PM -0700, Brad Larson wrote: > > + spi0: spi@2800 { > > + compatible = "pensando,elba-spi"; > > + reg = <0x0 0x2800 0x0 0x100>; > > > + pensando,syscon-spics = <&mssoc 0x2468>; > > I am wondering do you really need to define the > "pensando,syscon-spics" property as accepting a phandle with an > additional argument? That would have been justified if you had at > least two SPI controllers with different CS override registers. AFAICS > you've got only one here. So you can simplify the bindings by defining > the property like "pensando,syscon" (with no "spics" suffix) which > accepts the syscon phandle alone. Respective SPICS offset can be > locally declared in the driver as a macro with respective name. Yes this can be simplified and doing that in updated patchset. Only this API call is needed in dw_spi_elba_init(). syscon_regmap_lookup_by_phandle(np, "pensando,syscon"); Regards, Brad
On 26/05/2022 02:19, Brad Larson wrote: > Hi Krzysztof, > > On Thu, Apr 7, 2022 at 12:06 PM Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> wrote: >> >> On 07/04/2022 01:36, Brad Larson wrote: >>> Add Pensando common and Elba SoC specific device nodes >>> >>> +&spi0 { >>> + num-cs = <4>; >>> + cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>, >>> + <&porta 7 GPIO_ACTIVE_LOW>; >>> + status = "okay"; >>> + spi0_cs0@0 { >> >> Generic node name needed matching the class of a devicxe. > > The device on this spi bus is a FPGA with 4 functions and looking at > other projects I've changed it to a resource-controller node name. On > cs0 there is a sub-device reset-controller added in the upcoming > patchset to enable hardware reset of the eMMC device. > >>> + compatible = "semtech,sx1301"; /* Enable spidev */ >> >> This comment is a bit odd... did you just use random compatible from >> spidev instead of defining proper compatible? > > Yes, because adding a compatible was nacked. We have a driver added > (two actually, mfd and reset driver) for the next patch update. Yeah, but using some other one is also not correct. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 1ba04e31a438..cb697f9be2a4 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -20,6 +20,7 @@ subdir-y += marvell subdir-y += mediatek subdir-y += microchip subdir-y += nvidia +subdir-y += pensando subdir-y += qcom subdir-y += realtek subdir-y += renesas diff --git a/arch/arm64/boot/dts/pensando/Makefile b/arch/arm64/boot/dts/pensando/Makefile new file mode 100644 index 000000000000..3d34b8a28a3f --- /dev/null +++ b/arch/arm64/boot/dts/pensando/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +dtb-$(CONFIG_ARCH_PENSANDO) += elba-asic.dtb diff --git a/arch/arm64/boot/dts/pensando/elba-16core.dtsi b/arch/arm64/boot/dts/pensando/elba-16core.dtsi new file mode 100644 index 000000000000..9de602cdeb8b --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba-16core.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020-2022 Pensando Systems Inc. + */ + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { cpu = <&cpu0>; }; + core1 { cpu = <&cpu1>; }; + core2 { cpu = <&cpu2>; }; + core3 { cpu = <&cpu3>; }; + }; + + cluster1 { + core0 { cpu = <&cpu4>; }; + core1 { cpu = <&cpu5>; }; + core2 { cpu = <&cpu6>; }; + core3 { cpu = <&cpu7>; }; + }; + + cluster2 { + core0 { cpu = <&cpu8>; }; + core1 { cpu = <&cpu9>; }; + core2 { cpu = <&cpu10>; }; + core3 { cpu = <&cpu11>; }; + }; + + cluster3 { + core0 { cpu = <&cpu12>; }; + core1 { cpu = <&cpu13>; }; + core2 { cpu = <&cpu14>; }; + core3 { cpu = <&cpu15>; }; + }; + }; + + /* CLUSTER 0 */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x0>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x1>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x2>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x3>; + next-level-cache = <&l2_0>; + enable-method = "psci"; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + }; + + /* CLUSTER 1 */ + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x100>; + next-level-cache = <&l2_1>; + enable-method = "psci"; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x101>; + next-level-cache = <&l2_1>; + enable-method = "psci"; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x102>; + next-level-cache = <&l2_1>; + enable-method = "psci"; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x103>; + next-level-cache = <&l2_1>; + enable-method = "psci"; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + }; + + /* CLUSTER 2 */ + cpu8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x200>; + next-level-cache = <&l2_2>; + enable-method = "psci"; + }; + + cpu9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x201>; + next-level-cache = <&l2_2>; + enable-method = "psci"; + }; + + cpu10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x202>; + next-level-cache = <&l2_2>; + enable-method = "psci"; + }; + + cpu11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x203>; + next-level-cache = <&l2_2>; + enable-method = "psci"; + }; + + l2_2: l2-cache2 { + compatible = "cache"; + }; + + /* CLUSTER 3 */ + cpu12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x300>; + next-level-cache = <&l2_3>; + enable-method = "psci"; + }; + + cpu13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x301>; + next-level-cache = <&l2_3>; + enable-method = "psci"; + }; + + cpu14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x302>; + next-level-cache = <&l2_3>; + enable-method = "psci"; + }; + + cpu15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0 0x303>; + next-level-cache = <&l2_3>; + enable-method = "psci"; + }; + + l2_3: l2-cache3 { + compatible = "cache"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi new file mode 100644 index 000000000000..7a89df68fdf7 --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020-2022, Pensando Systems Inc. + */ + +&ahb_clk { + clock-frequency = <400000000>; +}; + +&emmc_clk { + clock-frequency = <200000000>; +}; + +&flash_clk { + clock-frequency = <400000000>; +}; + +&ref_clk { + clock-frequency = <156250000>; +}; + +&qspi { + status = "okay"; + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <2>; + m25p,fast-read; + cdns,read-delay = <0>; + cdns,tshsl-ns = <0>; + cdns,tsd2d-ns = <0>; + cdns,tchsh-ns = <0>; + cdns,tslch-ns = <0>; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&emmc { + bus-width = <8>; + status = "okay"; +}; + +&wdt0 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&spi0 { + num-cs = <4>; + cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>, + <&porta 7 GPIO_ACTIVE_LOW>; + status = "okay"; + spi0_cs0@0 { + compatible = "semtech,sx1301"; /* Enable spidev */ + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12000000>; + reg = <0>; + }; + + spi0_cs1@1 { + compatible = "semtech,sx1301"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12000000>; + reg = <1>; + }; + + spi0_cs2@2 { + compatible = "semtech,sx1301"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12000000>; + reg = <2>; + interrupt-parent = <&porta>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + + spi0_cs3@3 { + compatible = "semtech,sx1301"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12000000>; + reg = <3>; + }; +}; diff --git a/arch/arm64/boot/dts/pensando/elba-asic.dts b/arch/arm64/boot/dts/pensando/elba-asic.dts new file mode 100644 index 000000000000..01251143dd5e --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba-asic.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Pensando Elba Board. + * + * Copyright (c) 2020-2022 Pensando Systems Inc. + */ + +/dts-v1/; + +#include "elba.dtsi" +#include "elba-16core.dtsi" +#include "elba-asic-common.dtsi" +#include "elba-flash-parts.dtsi" + +/ { + model = "Pensando Elba Board"; + compatible = "pensando,elba-ortano", "pensando,elba"; + + aliases { + serial0 = &uart0; + spi0 = &spi0; + spi1 = &qspi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi new file mode 100644 index 000000000000..4b2e54d97494 --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020-2022 Pensando Systems Inc. + */ + +&flash0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "flash"; + reg = <0x10000 0xfff0000>; + }; + + partition@f0000 { + label = "golduenv"; + reg = <0xf0000 0x10000>; + }; + + partition@100000 { + label = "boot0"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "golduboot"; + reg = <0x180000 0x200000>; + }; + + partition@380000 { + label = "brdcfg0"; + reg = <0x380000 0x10000>; + }; + + partition@390000 { + label = "brdcfg1"; + reg = <0x390000 0x10000>; + }; + + partition@400000 { + label = "goldfw"; + reg = <0x400000 0x3c00000>; + }; + + partition@4010000 { + label = "fwmap"; + reg = <0x4010000 0x20000>; + }; + + partition@4030000 { + label = "fwsel"; + reg = <0x4030000 0x20000>; + }; + + partition@4090000 { + label = "bootlog"; + reg = <0x4090000 0x20000>; + }; + + partition@40b0000 { + label = "panicbuf"; + reg = <0x40b0000 0x20000>; + }; + + partition@40d0000 { + label = "uservars"; + reg = <0x40d0000 0x20000>; + }; + + partition@4200000 { + label = "uboota"; + reg = <0x4200000 0x400000>; + }; + + partition@4600000 { + label = "ubootb"; + reg = <0x4600000 0x400000>; + }; + + partition@4a00000 { + label = "mainfwa"; + reg = <0x4a00000 0x1000000>; + }; + + partition@5a00000 { + label = "mainfwb"; + reg = <0x5a00000 0x1000000>; + }; + + partition@6a00000 { + label = "diaguboot"; + reg = <0x6a00000 0x400000>; + }; + + partition@8000000 { + label = "diagfw"; + reg = <0x8000000 0x7fe0000>; + }; + + partition@ffe0000 { + label = "ubootenv"; + reg = <0xffe0000 0x10000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/pensando/elba.dtsi b/arch/arm64/boot/dts/pensando/elba.dtsi new file mode 100644 index 000000000000..10e06eb8cda6 --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020-2022, Pensando Systems Inc. + */ + +#include <dt-bindings/gpio/gpio.h> +#include "dt-bindings/interrupt-controller/arm-gic.h" + +/ { + model = "Elba ASIC Board"; + compatible = "pensando,elba"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + dma-coherent; + + ahb_clk: oscillator0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + emmc_clk: oscillator2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + flash_clk: oscillator3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + ref_clk: oscillator4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c0: i2c@400 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x400 0x0 0x100>; + clocks = <&ahb_clk>; + #address-cells = <1>; + #size-cells = <0>; + i2c-sda-hold-time-ns = <480>; + snps,sda-timeout-ms = <750>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + wdt0: watchdog@1400 { + compatible = "snps,dw-wdt"; + reg = <0x0 0x1400 0x0 0x100>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + qspi: spi@2400 { + compatible = "pensando,elba-qspi", "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2400 0x0 0x400>, + <0x0 0x7fff0000 0x0 0x1000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&flash_clk>; + cdns,fifo-depth = <1024>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x7fff0000>; + status = "disabled"; + }; + + spi0: spi@2800 { + compatible = "pensando,elba-spi"; + reg = <0x0 0x2800 0x0 0x100>; + pensando,syscon-spics = <&mssoc 0x2468>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <2>; + status = "disabled"; + }; + + gpio0: gpio@4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x4000 0x0 0x78>; + status = "disabled"; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <8>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + }; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + reg = <1>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <8>; + }; + }; + + uart0: serial@4800 { + compatible = "ns16550a"; + reg = <0x0 0x4800 0x0 0x100>; + clocks = <&ref_clk>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + gic: interrupt-controller@800000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x800000 0x0 0x200000>, /* GICD */ + <0x0 0xa00000 0x0 0x200000>; /* GICR */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + /* + * Elba specific pre-ITS is enabled using the + * existing property socionext,synquacer-pre-its + */ + gic_its: msi-controller@820000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x820000 0x0 0x10000>; + socionext,synquacer-pre-its = + <0xc00000 0x1000000>; + }; + }; + + emmc: mmc@30440000 { + compatible = "pensando,elba-sd4hc", "cdns,sd4hc"; + clocks = <&emmc_clk>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x30440000 0x0 0x10000>, + <0x0 0x30480044 0x0 0x4>; /* byte-lane ctrl */ + cdns,phy-input-delay-sd-highspeed = <0x4>; + cdns,phy-input-delay-legacy = <0x4>; + cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>; + cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>; + mmc-ddr-1_8v; + status = "disabled"; + }; + + mssoc: mssoc@307c0000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x307c0000 0x0 0x3000>; + }; + }; +};
Add Pensando common and Elba SoC specific device nodes Signed-off-by: Brad Larson <brad@pensando.io> --- Change from V3: - Changed to dual copyright (GPL-2.0+ OR MIT) - Minor changes from review input arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/pensando/Makefile | 3 + arch/arm64/boot/dts/pensando/elba-16core.dtsi | 189 ++++++++++++++++++ .../boot/dts/pensando/elba-asic-common.dtsi | 98 +++++++++ arch/arm64/boot/dts/pensando/elba-asic.dts | 28 +++ .../boot/dts/pensando/elba-flash-parts.dtsi | 106 ++++++++++ arch/arm64/boot/dts/pensando/elba.dtsi | 189 ++++++++++++++++++ 7 files changed, 614 insertions(+) create mode 100644 arch/arm64/boot/dts/pensando/Makefile create mode 100644 arch/arm64/boot/dts/pensando/elba-16core.dtsi create mode 100644 arch/arm64/boot/dts/pensando/elba-asic-common.dtsi create mode 100644 arch/arm64/boot/dts/pensando/elba-asic.dts create mode 100644 arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi create mode 100644 arch/arm64/boot/dts/pensando/elba.dtsi