diff mbox series

[2/6] rtw88: fix incorrect frequency reported

Message ID 20220407095858.46807-3-pkshih@realtek.com
State New
Headers show
Series rtw88: 8821c: support AP mode | expand

Commit Message

Ping-Ke Shih April 7, 2022, 9:58 a.m. UTC 
From: Po-Hao Huang <phhuang@realtek.com>

We should only fill in frequency reported by firmware during scan.
Add this so frames won't be dropped by mac80211 due to frequency
mismatch.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/rx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/rx.c b/drivers/net/wireless/realtek/rtw88/rx.c
index d2d607e22198d..84aedabdf2853 100644
--- a/drivers/net/wireless/realtek/rtw88/rx.c
+++ b/drivers/net/wireless/realtek/rtw88/rx.c
@@ -158,7 +158,8 @@  void rtw_rx_fill_rx_status(struct rtw_dev *rtwdev,
 	memset(rx_status, 0, sizeof(*rx_status));
 	rx_status->freq = hw->conf.chandef.chan->center_freq;
 	rx_status->band = hw->conf.chandef.chan->band;
-	if (rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_SCAN_OFFLOAD))
+	if (rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_SCAN_OFFLOAD) &&
+	    test_bit(RTW_FLAG_SCANNING, rtwdev->flags))
 		rtw_set_rx_freq_by_pktstat(pkt_stat, rx_status);
 	if (pkt_stat->crc_err)
 		rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;