diff mbox series

[v3,2/2] scsi: pm80xx: enable upper inbound, outbound queues

Message ID 20220408080538.278707-3-Ajish.Koshy@microchip.com
State New
Headers show
Series pm80xx updates | expand

Commit Message

Ajish Koshy April 8, 2022, 8:05 a.m. UTC 
Executing driver on servers with more than 32 CPUs were faced with command
timeouts. This is because we were not geting completions for commands
submitted on IQ32 - IQ63.

Set E64Q bit to enable upper inbound and outbound queues 32 to 63 in the
MPI main configuration table.

Added 500ms delay after successful MPI initialization as mentioned in
controller datasheet.

Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index cdb31679f419..71b6cc4b9420 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -766,6 +766,10 @@  static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
 	pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity	= 0x01;
 	pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt		= 0x01;
 
+	/* Enable higher IQs and OQs, 32 to 63, bit 16 */
+	if (pm8001_ha->max_q_num > 32)
+		pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |=
+							1 << 16;
 	/* Disable end to end CRC checking */
 	pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump = (0x1 << 16);
 
@@ -1027,6 +1031,8 @@  static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
 	if (0x0000 != gst_len_mpistate)
 		return -EBUSY;
 
+	msleep(500);
+
 	return 0;
 }