diff mbox series

[v2] scsi: sym53c500_cs: Stop using struct scsi_pointer

Message ID accf71e293ba3aed6d18c8baeb405de8dfe7c935.1649235939.git.fthain@linux-m68k.org
State New
Headers show
Series [v2] scsi: sym53c500_cs: Stop using struct scsi_pointer | expand

Commit Message

Finn Thain April 6, 2022, 9:05 a.m. UTC
This driver doesn't use SCp.ptr to save a SCSI command data pointer which
means "scsi pointer" is a complete misnomer here. Only a few members of
struct scsi_pointer are needed so move those to private command data.

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
---
The sym53c500_cs driver somehow missed out on complete scsi_pointer
removal in Bart's recently queued patch series, unlike nsp32 for example.
So this patch finishes the job. Compile-tested only.

Changed since v1:
 - Removed SYM53c500_priv() helper function as suggested by Christoph.
---
 drivers/scsi/pcmcia/sym53c500_cs.c | 52 ++++++++++++++----------------
 1 file changed, 25 insertions(+), 27 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index c4a838635893..5d7dfefd6f6c 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -192,10 +192,11 @@  struct sym53c500_data {
 	int fast_pio;
 };
 
-static struct scsi_pointer *sym53c500_scsi_pointer(struct scsi_cmnd *cmd)
-{
-	return scsi_cmd_priv(cmd);
-}
+struct sym53c500_cmd_priv {
+	int status;
+	int message;
+	int phase;
+};
 
 enum Phase {
     idle,
@@ -356,7 +357,7 @@  SYM53C500_intr(int irq, void *dev_id)
 	struct sym53c500_data *data =
 	    (struct sym53c500_data *)dev->hostdata;
 	struct scsi_cmnd *curSC = data->current_SC;
-	struct scsi_pointer *scsi_pointer = sym53c500_scsi_pointer(curSC);
+	struct sym53c500_cmd_priv *scp = scsi_cmd_priv(curSC);
 	int fast_pio = data->fast_pio;
 
 	spin_lock_irqsave(dev->host_lock, flags);
@@ -403,12 +404,11 @@  SYM53C500_intr(int irq, void *dev_id)
 
 	if (int_reg & 0x20) {		/* Disconnect */
 		DEB(printk("SYM53C500: disconnect intr received\n"));
-		if (scsi_pointer->phase != message_in) {	/* Unexpected disconnect */
+		if (scp->phase != message_in) {	/* Unexpected disconnect */
 			curSC->result = DID_NO_CONNECT << 16;
 		} else {	/* Command complete, return status and message */
-			curSC->result = (scsi_pointer->Status & 0xff) |
-				((scsi_pointer->Message & 0xff) << 8) |
-				(DID_OK << 16);
+			curSC->result = (scp->status & 0xff) |
+				((scp->message & 0xff) << 8) | (DID_OK << 16);
 		}
 		goto idle_out;
 	}
@@ -419,7 +419,7 @@  SYM53C500_intr(int irq, void *dev_id)
 			struct scatterlist *sg;
 			int i;
 
-			scsi_pointer->phase = data_out;
+			scp->phase = data_out;
 			VDEB(printk("SYM53C500: Data-Out phase\n"));
 			outb(FLUSH_FIFO, port_base + CMD_REG);
 			LOAD_DMA_COUNT(port_base, scsi_bufflen(curSC));	/* Max transfer size */
@@ -438,7 +438,7 @@  SYM53C500_intr(int irq, void *dev_id)
 			struct scatterlist *sg;
 			int i;
 
-			scsi_pointer->phase = data_in;
+			scp->phase = data_in;
 			VDEB(printk("SYM53C500: Data-In phase\n"));
 			outb(FLUSH_FIFO, port_base + CMD_REG);
 			LOAD_DMA_COUNT(port_base, scsi_bufflen(curSC));	/* Max transfer size */
@@ -453,12 +453,12 @@  SYM53C500_intr(int irq, void *dev_id)
 		break;
 
 	case 0x02:		/* COMMAND */
-		scsi_pointer->phase = command_ph;
+		scp->phase = command_ph;
 		printk("SYM53C500: Warning: Unknown interrupt occurred in command phase!\n");
 		break;
 
 	case 0x03:		/* STATUS */
-		scsi_pointer->phase = status_ph;
+		scp->phase = status_ph;
 		VDEB(printk("SYM53C500: Status phase\n"));
 		outb(FLUSH_FIFO, port_base + CMD_REG);
 		outb(INIT_CMD_COMPLETE, port_base + CMD_REG);
@@ -471,24 +471,22 @@  SYM53C500_intr(int irq, void *dev_id)
 
 	case 0x06:		/* MESSAGE-OUT */
 		DEB(printk("SYM53C500: Message-Out phase\n"));
-		scsi_pointer->phase = message_out;
+		scp->phase = message_out;
 		outb(SET_ATN, port_base + CMD_REG);	/* Reject the message */
 		outb(MSG_ACCEPT, port_base + CMD_REG);
 		break;
 
 	case 0x07:		/* MESSAGE-IN */
 		VDEB(printk("SYM53C500: Message-In phase\n"));
-		scsi_pointer->phase = message_in;
+		scp->phase = message_in;
 
-		scsi_pointer->Status = inb(port_base + SCSI_FIFO);
-		scsi_pointer->Message = inb(port_base + SCSI_FIFO);
+		scp->status = inb(port_base + SCSI_FIFO);
+		scp->message = inb(port_base + SCSI_FIFO);
 
 		VDEB(printk("SCSI FIFO size=%d\n", inb(port_base + FIFO_FLAGS) & 0x1f));
-		DEB(printk("Status = %02x  Message = %02x\n",
-			   scsi_pointer->Status, scsi_pointer->Message));
+		DEB(printk("Status = %02x  Message = %02x\n", scp->status, scp->message));
 
-		if (scsi_pointer->Message == SAVE_POINTERS ||
-		    scsi_pointer->Message == DISCONNECT) {
+		if (scp->message == SAVE_POINTERS || scp->message == DISCONNECT) {
 			outb(SET_ATN, port_base + CMD_REG);	/* Reject message */
 			DEB(printk("Discarding SAVE_POINTERS message\n"));
 		}
@@ -500,7 +498,7 @@  SYM53C500_intr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 
 idle_out:
-	scsi_pointer->phase = idle;
+	scp->phase = idle;
 	scsi_done(curSC);
 	goto out;
 }
@@ -548,7 +546,7 @@  SYM53C500_info(struct Scsi_Host *SChost)
 
 static int SYM53C500_queue_lck(struct scsi_cmnd *SCpnt)
 {
-	struct scsi_pointer *scsi_pointer = sym53c500_scsi_pointer(SCpnt);
+	struct sym53c500_cmd_priv *scp = scsi_cmd_priv(SCpnt);
 	int i;
 	int port_base = SCpnt->device->host->io_port;
 	struct sym53c500_data *data =
@@ -565,9 +563,9 @@  static int SYM53C500_queue_lck(struct scsi_cmnd *SCpnt)
 	VDEB(printk("\n"));
 
 	data->current_SC = SCpnt;
-	scsi_pointer->phase = command_ph;
-	scsi_pointer->Status = 0;
-	scsi_pointer->Message = 0;
+	scp->phase = command_ph;
+	scp->status = 0;
+	scp->message = 0;
 
 	/* We are locked here already by the mid layer */
 	REG0(port_base);
@@ -682,7 +680,7 @@  static struct scsi_host_template sym53c500_driver_template = {
      .this_id			= 7,
      .sg_tablesize		= 32,
      .shost_groups		= SYM53C500_shost_groups,
-     .cmd_size			= sizeof(struct scsi_pointer),
+     .cmd_size			= sizeof(struct sym53c500_cmd_priv),
 };
 
 static int SYM53C500_config_check(struct pcmcia_device *p_dev, void *priv_data)