diff mbox series

[1/3] arm64: dts: qcom: sm8450: Add thermal sensor controllers

Message ID 20220410234458.1739279-2-dmitry.baryshkov@linaro.org
State New
Headers show
Series [1/3] arm64: dts: qcom: sm8450: Add thermal sensor controllers | expand

Commit Message

Dmitry Baryshkov April 10, 2022, 11:44 p.m. UTC 
From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

The change adds description of two thermal sensor controllers found
on SM8450.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Bjorn Andersson April 21, 2022, 2:26 p.m. UTC | #1 
On Mon, 11 Apr 2022 02:44:56 +0300, Dmitry Baryshkov wrote:
> From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
> 
> The change adds description of two thermal sensor controllers found
> on SM8450.
> 
> 

Applied, thanks!

[1/3] arm64: dts: qcom: sm8450: Add thermal sensor controllers
      commit: 48995e863307bf08a51362a0aafb10e70bdafb4e

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 934e29b9e153..b695ce824722 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1021,6 +1021,28 @@  pdc: interrupt-controller@b220000 {
 			interrupt-controller;
 		};
 
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;