@@ -1666,7 +1666,7 @@ agnoc@0 {
ranges;
pcie0: pcie@600000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ compatible = "qcom,pcie-msm8996";
status = "disabled";
power-domains = <&gcc PCIE0_GDSC>;
bus-range = <0x00 0xff>;
@@ -1718,7 +1718,7 @@ pcie0: pcie@600000 {
};
pcie1: pcie@608000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ compatible = "qcom,pcie-msm8996";
power-domains = <&gcc PCIE1_GDSC>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
@@ -1771,7 +1771,7 @@ pcie1: pcie@608000 {
};
pcie2: pcie@610000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ compatible = "qcom,pcie-msm8996";
power-domains = <&gcc PCIE2_GDSC>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
On MSM8996 PCI controller bindings are not compatible with snps,dw-pcie binding. The platform doesn't provide second (global) IRQ, it requires additional glue code. To prevent it from probing against the dw-pcie driver, remove corresponding compatible. Fixes: ed965ef89227 ("arm64: dts: qcom: msm8996: add support to pcie") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)