diff mbox series

[v2,1/2] media: dt-bindings: imx412: Add regulator descriptions

Message ID 20220411013131.3553098-2-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series media: i2c: imx412: Add regulator control to imx412 | expand

Commit Message

Bryan O'Donoghue April 11, 2022, 1:31 a.m. UTC 
The imx412 like many I2C camera sensors has three voltage rails which
depending on platform may be necessary to switch power onto directly.

Add in as optional rails so as not to break anything for existing users.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../devicetree/bindings/media/i2c/sony,imx412.yaml       | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
index afcf70947f7e..26d1807d0bb6 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
@@ -32,6 +32,15 @@  properties:
     description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz
     maxItems: 1
 
+  dovdd-supply:
+    description: Interface power supply.
+
+  avdd-supply:
+    description: Analog power supply.
+
+  dvdd-supply:
+    description: Digital power supply.
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1