@@ -130,6 +130,7 @@
reg = <0x00100000 0x001f7400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ #power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
};
@@ -143,6 +144,45 @@
status = "disabled";
};
+ usb_hsphy: hsphy@ff4000 {
+ compatible = "qcom,usb-snps-hs-7nm-phy";
+ reg = <0xff4000 0x120>;
+ #phy-cells = <0>;
+ status = "disabled";
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_BCR>;
+ };
+
+ usb_qmpphy: phy@ff6000 {
+ compatible = "qcom,sdx65-qmp-usb3-uni-phy";
+ reg = <0x00ff6000 0x1c8>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_EN>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+ <&gcc GCC_USB3_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ usb_ssphy: phy@ff6200 {
+ reg = <0x00ff6e00 0x160>,
+ <0x00ff7000 0x1ec>,
+ <0x00ff6200 0x1e00>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
system_noc: interconnect@1620000 {
compatible = "qcom,sdx65-system-noc";
reg = <0x1620000 0x31200>;
@@ -182,6 +222,49 @@
status = "disabled";
};
+ usb: usb@a6f8800 {
+ compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
+ reg = <0x0a6f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_USB30_MSTR_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 19 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 18 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+ "ss_phy_irq", "dm_hs_phy_irq";
+
+ power-domains = <&gcc USB30_GDSC>;
+
+ resets = <&gcc GCC_USB30_BCR>;
+
+ usb_dwc3: dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0a600000 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x1a0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_hsphy>, <&usb_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
spmi_bus: qcom,spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0xd00>,
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and SNPS HS PHY on SDX65. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> --- arch/arm/boot/dts/qcom-sdx65.dtsi | 83 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+)