@@ -144,6 +144,9 @@ uart3: serial@50000000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 0 0 0 0 0 1>,
+ <&dmamux 1 0 0 0 1 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -155,6 +158,9 @@ uart4: serial@50001000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 2 0 0 0 2 1>,
+ <&dmamux 3 0 0 0 3 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -166,6 +172,9 @@ uart5: serial@50002000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 4 0 0 0 4 1>,
+ <&dmamux 5 0 0 0 5 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -177,6 +186,9 @@ uart6: serial@50003000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 6 0 0 0 6 1>,
+ <&dmamux 7 0 0 0 7 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -188,6 +200,9 @@ uart7: serial@50004000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 4 0 0 0 20 1>,
+ <&dmamux 5 0 0 0 21 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
UART 0 to 2 do not have DMA support, while UART 3 to 7 do. Fill the "dmas" and "dma-names" properties for each of these nodes. Please mind that these nodes go through the dmamux node which will redirect the requests to the right DMA controller. The first 4 cells of the "dmas" properties will be transferred as-is to the DMA controllers. The last 2 cells are consumed by the dmamux. Which means cell 0 and 4 are almost redundant, one giving the controller request ID and the other the dmamux channel which is a 1:1 translation of the request IDs, shifted by 16 when pointing to the second DMA controller. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm/boot/dts/r9a06g032.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)