diff mbox series

[v9,03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1

Message ID 1650552459-21077-4-git-send-email-quic_srivasam@quicinc.com
State New
Headers show
Series Add soundcard support for sc7280 based platforms. | expand

Commit Message

Srinivasa Rao Mandadapu April 21, 2022, 2:47 p.m. UTC 
Enable rx, tx and va macro codecs and soundwire nodes for
CRD rev5 (aka CRD 3.0/3.1) boards.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 35 +++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Comments

Srinivasa Rao Mandadapu April 22, 2022, 1:44 p.m. UTC | #1 
On 4/21/2022 9:58 PM, Matthias Kaehlcke wrote:
Thanks for your time Matthias!!!
> On Thu, Apr 21, 2022 at 08:17:30PM +0530, Srinivasa Rao Mandadapu wrote:
>> Enable rx, tx and va macro codecs and soundwire nodes for
>> CRD rev5 (aka CRD 3.0/3.1) boards.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
>> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 35 +++++++++++++++++++++++
>>   1 file changed, 35 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
>> index fd6eadc..d0794f2 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
>> @@ -69,6 +69,19 @@ ap_ts_pen_1v8: &i2c13 {
>>   	};
>>   };
>>   
>> +&lpass_rx_macro {
>> +	status = "okay";
>> +};
>> +
>> +&lpass_tx_macro {
>> +	status = "okay";
>> +};
>> +
>> +&lpass_va_macro {
>> +	status = "okay";
>> +	vdd-micb-supply = <&vreg_bob>;
>> +};
>> +
>>   /* For nvme */
>>   &pcie1 {
>>   	status = "okay";
>> @@ -89,6 +102,28 @@ ap_ts_pen_1v8: &i2c13 {
>>   	status = "okay";
>>   };
>>   
>> +&swr0 {
>> +	status = "okay";
>> +
>> +	wcd_rx: codec@0,4 {
>> +		compatible = "sdw20217010d00";
>> +		reg = <0 4>;
>> +		#sound-dai-cells = <1>;
>> +		qcom,rx-port-mapping = <1 2 3 4 5>;
>> +	};
>> +};
>> +
>> +&swr1 {
>> +	status = "okay";
>> +
>> +	wcd_tx: codec@0,3 {
>> +		compatible = "sdw20217010d00";
>> +		reg = <0 3>;
>> +		#sound-dai-cells = <1>;
>> +		qcom,tx-port-mapping = <1 2 3 4>;
>> +	};
>> +};
> The wcd9385 is on the qcard, so the wcd_tx/rx nodes should probably
> be added to sc7280-qcard.dtsi, and the CRD DT would only set 'status'.
Okay. will update accordingly.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index fd6eadc..d0794f2 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -69,6 +69,19 @@  ap_ts_pen_1v8: &i2c13 {
 	};
 };
 
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+	vdd-micb-supply = <&vreg_bob>;
+};
+
 /* For nvme */
 &pcie1 {
 	status = "okay";
@@ -89,6 +102,28 @@  ap_ts_pen_1v8: &i2c13 {
 	status = "okay";
 };
 
+&swr0 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		#sound-dai-cells = <1>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		#sound-dai-cells = <1>;
+		qcom,tx-port-mapping = <1 2 3 4>;
+	};
+};
+
 /* PINCTRL - BOARD-SPECIFIC */
 
 /*