diff mbox series

[RFC,v1,2/3] net: dsa: mt753x: make CPU-Port dynamic

Message ID 20220426134924.30372-3-linux@fw-web.de
State New
Headers show
Series None | expand

Commit Message

Frank Wunderlich April 26, 2022, 1:49 p.m. UTC
From: Frank Wunderlich <frank-w@public-files.de>

Currently CPU-Port is hardcoded to Port 6.

On BPI-R2-Pro board this port is not connected and only Port 5 is
connected to gmac of SoC.

Replace this hardcoded CPU-Port with a member in mt7530_priv struct
which is set in mt753x_cpu_port_enable to the right port.

I defined a default in probe (in case no CPU-Port will be setup) and
if both cpu-port were setup port 6 will be used like the const prior
this patch.

In mt7531_setup first access is before we know which port should be used
(mt753x_cpu_port_enable) so section "BPDU to CPU port" needs to be moved
down.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
 drivers/net/dsa/mt7530.c | 46 ++++++++++++++++++++++------------------
 drivers/net/dsa/mt7530.h |  2 +-
 2 files changed, 26 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index ccf4cb944167..4789105b8137 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1004,6 +1004,7 @@  mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
 			return ret;
 	}
 
+	priv->cpu_port = port;
 	/* Enable Mediatek header mode on the cpu port */
 	mt7530_write(priv, MT7530_PVC_P(port),
 		     PORT_SPEC_TAG);
@@ -1041,7 +1042,7 @@  mt7530_port_enable(struct dsa_switch *ds, int port,
 	 * restore the port matrix if the port is the member of a certain
 	 * bridge.
 	 */
-	priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT));
+	priv->ports[port].pm |= PCR_MATRIX(BIT(priv->cpu_port));
 	priv->ports[port].enable = true;
 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
 		   priv->ports[port].pm);
@@ -1190,8 +1191,8 @@  mt7530_port_bridge_join(struct dsa_switch *ds, int port,
 			struct netlink_ext_ack *extack)
 {
 	struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
-	u32 port_bitmap = BIT(MT7530_CPU_PORT);
 	struct mt7530_priv *priv = ds->priv;
+	u32 port_bitmap = BIT(priv->cpu_port);
 
 	mutex_lock(&priv->reg_mutex);
 
@@ -1267,9 +1268,9 @@  mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
 	 * the CPU port get out of VLAN filtering mode.
 	 */
 	if (all_user_ports_removed) {
-		mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT),
+		mt7530_write(priv, MT7530_PCR_P(priv->cpu_port),
 			     PCR_MATRIX(dsa_user_ports(priv->ds)));
-		mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), PORT_SPEC_TAG
+		mt7530_write(priv, MT7530_PVC_P(priv->cpu_port), PORT_SPEC_TAG
 			     | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
 	}
 }
@@ -1335,8 +1336,8 @@  mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
 	 */
 	if (priv->ports[port].enable)
 		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
-			   PCR_MATRIX(BIT(MT7530_CPU_PORT)));
-	priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT));
+			   PCR_MATRIX(BIT(priv->cpu_port)));
+	priv->ports[port].pm = PCR_MATRIX(BIT(priv->cpu_port));
 
 	/* When a port is removed from the bridge, the port would be set up
 	 * back to the default as is at initial boot which is a VLAN-unaware
@@ -1503,6 +1504,7 @@  static int
 mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
 			   struct netlink_ext_ack *extack)
 {
+	struct mt7530_priv *priv = ds->priv;
 	if (vlan_filtering) {
 		/* The port is being kept as VLAN-unaware port when bridge is
 		 * set up with vlan_filtering not being set, Otherwise, the
@@ -1510,7 +1512,7 @@  mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
 		 * for becoming a VLAN-aware port.
 		 */
 		mt7530_port_set_vlan_aware(ds, port);
-		mt7530_port_set_vlan_aware(ds, MT7530_CPU_PORT);
+		mt7530_port_set_vlan_aware(ds, priv->cpu_port);
 	} else {
 		mt7530_port_set_vlan_unaware(ds, port);
 	}
@@ -1526,7 +1528,7 @@  mt7530_hw_vlan_add(struct mt7530_priv *priv,
 	u32 val;
 
 	new_members = entry->old_members | BIT(entry->port) |
-		      BIT(MT7530_CPU_PORT);
+		      BIT(priv->cpu_port);
 
 	/* Validate the entry with independent learning, create egress tag per
 	 * VLAN and joining the port as one of the port members.
@@ -1550,8 +1552,8 @@  mt7530_hw_vlan_add(struct mt7530_priv *priv,
 	 * DSA tag.
 	 */
 	mt7530_rmw(priv, MT7530_VAWD2,
-		   ETAG_CTRL_P_MASK(MT7530_CPU_PORT),
-		   ETAG_CTRL_P(MT7530_CPU_PORT,
+		   ETAG_CTRL_P_MASK(priv->cpu_port),
+		   ETAG_CTRL_P(priv->cpu_port,
 			       MT7530_VLAN_EGRESS_STACK));
 }
 
@@ -1575,7 +1577,7 @@  mt7530_hw_vlan_del(struct mt7530_priv *priv,
 	 * the entry would be kept valid. Otherwise, the entry is got to be
 	 * disabled.
 	 */
-	if (new_members && new_members != BIT(MT7530_CPU_PORT)) {
+	if (new_members && new_members != BIT(priv->cpu_port)) {
 		val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) |
 		      VLAN_VALID;
 		mt7530_write(priv, MT7530_VAWD1, val);
@@ -2105,7 +2107,7 @@  mt7530_setup(struct dsa_switch *ds)
 	 * controller also is the container for two GMACs nodes representing
 	 * as two netdev instances.
 	 */
-	dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent;
+	dn = dsa_to_port(ds, priv->cpu_port)->master->dev.of_node->parent;
 	ds->assisted_learning_on_cpu_port = true;
 	ds->mtu_enforcement_ingress = true;
 
@@ -2337,15 +2339,6 @@  mt7531_setup(struct dsa_switch *ds)
 	mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
 				 CORE_PLL_GROUP4, val);
 
-	/* BPDU to CPU port */
-	mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
-		   BIT(MT7530_CPU_PORT));
-	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
-		   MT753X_BPDU_CPU_ONLY);
-
-	/* Enable and reset MIB counters */
-	mt7530_mib_reset(ds);
-
 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
 		/* Disable forwarding by default on all ports */
 		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
@@ -2373,6 +2366,15 @@  mt7531_setup(struct dsa_switch *ds)
 			   PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
 	}
 
+	/* BPDU to CPU port */
+	mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
+		   BIT(priv->cpu_port));
+	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
+		   MT753X_BPDU_CPU_ONLY);
+
+	/* Enable and reset MIB counters */
+	mt7530_mib_reset(ds);
+
 	/* Setup VLAN ID 0 for VLAN-unaware bridges */
 	ret = mt7530_setup_vlan0(priv);
 	if (ret)
@@ -3213,6 +3215,8 @@  mt7530_probe(struct mdio_device *mdiodev)
 	if (!priv)
 		return -ENOMEM;
 
+	priv->cpu_port = 6;
+
 	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
 	if (!priv->ds)
 		return -ENOMEM;
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 91508e2feef9..62df8d10f6d4 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -8,7 +8,6 @@ 
 
 #define MT7530_NUM_PORTS		7
 #define MT7530_NUM_PHYS			5
-#define MT7530_CPU_PORT			6
 #define MT7530_NUM_FDB_RECORDS		2048
 #define MT7530_ALL_MEMBERS		0xff
 
@@ -823,6 +822,7 @@  struct mt7530_priv {
 	u8			mirror_tx;
 
 	struct mt7530_port	ports[MT7530_NUM_PORTS];
+	int			cpu_port;
 	/* protect among processes for registers access*/
 	struct mutex reg_mutex;
 	int irq;