diff mbox series

[RFC,v2,3/3] ARM: dto: Add bcm2711-rpi-7-inches-ts.dts overlay

Message ID 20220427185243.173594-4-detlev.casanova@collabora.com
State New
Headers show
Series ARM: dts: Support official Raspberry Pi 7inch touchscreen | expand

Commit Message

Detlev Casanova April 27, 2022, 6:52 p.m. UTC 
Add a device tree overlay to support the official Raspberrypi 7" touchscreen for
the bcm2711 devices.

The panel is connected on the DSI 1 port and uses the simple-panel
driver.

The device tree also makes sure to activate the pixelvalve[0-4] CRTC modules

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
---
 arch/arm/boot/dts/Makefile                    |   4 +
 arch/arm/boot/dts/overlays/Makefile           |   3 +
 .../dts/overlays/bcm2711-rpi-7-inches-ts.dts  | 125 ++++++++++++++++++
 arch/arm64/boot/dts/broadcom/Makefile         |   4 +
 .../arm64/boot/dts/broadcom/overlays/Makefile |   3 +
 .../overlays/bcm2711-rpi-7-inches-ts.dts      |   2 +
 6 files changed, 141 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/Makefile
 create mode 100644 arch/arm/boot/dts/overlays/bcm2711-rpi-7-inches-ts.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/overlays/Makefile
 create mode 100644 arch/arm64/boot/dts/broadcom/overlays/bcm2711-rpi-7-inches-ts.dts
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 235ad559acb2..eb0b0b121947 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1549,3 +1549,7 @@  dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-vegman-n110.dtb \
 	aspeed-bmc-vegman-rx20.dtb \
 	aspeed-bmc-vegman-sx20.dtb
+
+ifeq ($(CONFIG_OF_OVERLAY),y)
+subdir-y	+= overlays
+endif
diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
new file mode 100644
index 000000000000..c90883dfaf91
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -0,0 +1,3 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-7-inches-ts.dtbo
diff --git a/arch/arm/boot/dts/overlays/bcm2711-rpi-7-inches-ts.dts b/arch/arm/boot/dts/overlays/bcm2711-rpi-7-inches-ts.dts
new file mode 100644
index 000000000000..de98a6c1079a
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/bcm2711-rpi-7-inches-ts.dts
@@ -0,0 +1,125 @@ 
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	panel_disp1: panel@0 {
+		reg = <0 0 0>;
+		compatible = "raspberrypi,7inch-dsi", "simple-panel";
+		backlight = <&reg_display>;
+		power-supply = <&reg_display>;
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	reg_bridge: regulator@0 {
+		reg = <0 0 0>;
+		compatible = "regulator-fixed";
+		regulator-name = "bridge_reg";
+		gpio = <&reg_display 0 0>;
+		vin-supply = <&reg_display>;
+		enable-active-high;
+		status = "okay";
+	};
+};
+
+&i2c_csi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ft5406: touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		status = "okay";
+
+		vcc-supply = <&reg_display>;
+		reset-gpio = <&reg_display 1 1>;
+
+		touchscreen-size-x = < 800 >;
+		touchscreen-size-y = < 480 >;
+
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+
+	reg_display: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+		status = "okay";
+
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+};
+
+&dsi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	port {
+		dsi_out: endpoint {
+			remote-endpoint = <&bridge_in>;
+		};
+	};
+
+	bridge@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0>;
+		compatible = "toshiba,tc358762";
+
+		vddc-supply = <&reg_bridge>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve3 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index c6882032a428..a6c43c5b053a 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -7,6 +7,10 @@  dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
 			      bcm2837-rpi-cm3-io3.dtb
 
+ifeq ($(CONFIG_OF_OVERLAY),y)
+subdir-y	+= overlays
+endif
+
 subdir-y	+= bcm4908
 subdir-y	+= northstar2
 subdir-y	+= stingray
diff --git a/arch/arm64/boot/dts/broadcom/overlays/Makefile b/arch/arm64/boot/dts/broadcom/overlays/Makefile
new file mode 100644
index 000000000000..c90883dfaf91
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/overlays/Makefile
@@ -0,0 +1,3 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-7-inches-ts.dtbo
diff --git a/arch/arm64/boot/dts/broadcom/overlays/bcm2711-rpi-7-inches-ts.dts b/arch/arm64/boot/dts/broadcom/overlays/bcm2711-rpi-7-inches-ts.dts
new file mode 100644
index 000000000000..7d532b090305
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/overlays/bcm2711-rpi-7-inches-ts.dts
@@ -0,0 +1,2 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/overlays/bcm2711-rpi-7-inches-ts.dts"