@@ -887,24 +887,6 @@ static int smsc95xx_reset(struct usbnet *dev)
return ret;
}
- ret = smsc95xx_write_reg(dev, PM_CTRL, PM_CTL_PHY_RST_);
- if (ret < 0)
- return ret;
-
- timeout = 0;
- do {
- msleep(10);
- ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
- if (ret < 0)
- return ret;
- timeout++;
- } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
-
- if (timeout >= 100) {
- netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
- return ret;
- }
-
ret = smsc95xx_set_mac_address(dev);
if (ret < 0)
return ret;
smsc95xx_reset() resets the PHY behind the PHY driver's back, which seems like a bad idea generally. Remove that portion of the function. We're about to use PHY interrupts instead of polling to detect link changes on SMSC LAN95xx chips. Because smsc95xx_reset() is called from usbnet_open(), PHY interrupt settings are lost whenever the net_device is brought up. There are two other callers of smsc95xx_reset(), namely smsc95xx_bind() and smsc95xx_reset_resume(), and both may indeed benefit from a PHY reset. However they already perform one through their calls to phy_connect_direct() and phy_init_hw(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Gabriel Hojda <ghojda@yo2urs.ro> --- drivers/net/usb/smsc95xx.c | 18 ------------------ 1 file changed, 18 deletions(-)